Very Computer

1. Solved: trying to get Compaq QVISION card and mouse working (was NEC 4FGe problem)

I was able to get this setup working quite well.  The mouse is
a PS/2 mouse.  I set /dev/mouse to be a symbolic link to /dev/bmouseps2.
The other relevant parts of the XF86Config file follow.
Note the commented out lines in the monitor
section -- these were taken from one of the example XF86config
files -- they were supposed to work for an NEC4FGe, but they
did NOT.  I used the ModeLine's for the NEC4FG, and these worked
fine.

Section "Device"
    Identifier  "Compaq QVision/1024"
    VendorName  "Unknown"
    BoardName   "Unknown"
#    VideoRam    1024
    Clocks  25.17  28.32  41.53  50.35
EndSection

Section "Monitor"
    Identifier "NEC MultiSync 4FGe"
    VendorName "NEC"
    ModelName "MultiSync 4FGe"
    BandWidth 80Mhz        #\
    HorizSync 27-62KHz      #> from monitor documentation
    VertRefresh 55-90Hz    #/
#    ModeLine "640x480"  31  640  680  704  832 480 489 492 520
#    ModeLine "800x600"  50  800  864  976 1040 600 637 643 666
#    ModeLine "1024x768" 81 1024 1068 1204 1324 768 776 782 807
ModeLine "640x480"      25     640  664  760  800    480  491  493  525
ModeLine "800x600"      40     800  840  968 1056    600  601  605  628  -hsync +vsync
ModeLine "1024x768i"    45    1024 1064 1224 1264    768  777  785  817  +hsync +vsync
ModeLine "1024x768"     75    1024 1048 1184 1328    768  771  777  806  -hsync +vsync
EndSection

2. Enabling Routing & NICs

3. HELP : XFree86 2.1.1 doesn't work with COMPAQ QVISION cards

4. Unix - Frequently Asked Questions (6/7) [Frequent posting]

5. Getting Compaq 10/100 PC-Card (network card) working?

6. System configurations

7. Getting my Compaq Mouse to work w/ Linux

8. Why is Sun dumping CDE?

9. Modeline for a Compaq QVision 1024/e & Compaq 151FS display?

10. NEED: Xconfig for Compaq QVision/1024 & Compaq 171FS monitor

11. Configuring X11R6 for Compaq Qvision 1280 card

12. Problems configuring Compaq Qvision card for X

13. Compaq Qvision Card