Very Computer

I have a Gateway 2000, pentium 75, with a 1576 Vivitron monitor and a
STB Trio 64 PCI video card.  I have tried repeatedly to configure XF86
on my machine, but when I run startx I get the following error
message:
(--) S3: Unknown S3 Chipset: chip_id = 0xe1

*** None of the configured devices was detected ***

Fatal server error:
no screens found
xinit:  No such file or directory (errno 2): unexpected signal 13

I have followed all the directions in the HOWTO - ie. built a config
file, linked the appropriate X server (S3), but I am still having problems.
Could anyone please help?  

Thanks,

Michael Rierson

--
Department of Computer Science, Duke University, Durham, NC 27706

: I have a Gateway 2000, pentium 75, with a 1576 Vivitron monitor and a
: STB Trio 64 PCI video card.  I have tried repeatedly to configure XF86
: on my machine, but when I run startx I get the following error
: message:
: (--) S3: Unknown S3 Chipset: chip_id = 0xe1

: *** None of the configured devices was detected ***

: Fatal server error:
: no screens found
: xinit:  No such file or directory (errno 2): unexpected signal 13

I have Paradise Bahamas64 with S3Trio 764 chipset and 2MB of memory. I have
tried to set this card up under FreeBSD's XFree 3.1 (X11R6) with same
results. I even get the same chip id. Is S3 Trio 764 supported by XF86_S3?

----------------------------
-- Artur Jasowicz         --

----------------------------

Quote:> I have a Gateway 2000, pentium 75, with a 1576 Vivitron monitor and a
> STB Trio 64 PCI video card.  I have tried repeatedly to configure XF86
> on my machine, but when I run startx I get the following error
> message:
> (--) S3: Unknown S3 Chipset: chip_id = 0xe1

get XFree86 3.1.2 to support this chip.

Harald
--
All SCSI disks will from now on                     ___       _____
be required to send an email notice                0--,|    /OOOOOOO\
24 hours prior to complete hardware failure!      <_/  /  /OOOOOOOOOOO\
                                                    \  \/OOOOOOOOOOOOOOO\
                                                      \ OOOOOOOOOOOOOOOOO|//
Harald Koenig,                                         \/\/\/\/\/\/\/\/\/
Inst.f.Theoret.Astrophysik                              //  /     \\  \

Try a more up to date version (like Slackware 3.0) which has X Windows v.
3.1.2 or later. The server on this version worked on my identical Gateway
Syatem. Good Luck!