XF86 on Compaq Prolinea MT4/66

XF86 on Compaq Prolinea MT4/66

Post by Felix Breuk » Fri, 13 Oct 1995 04:00:00

Hi there,

I've installed Linux on my Compaq ProLinea MT 4/66. The machine has a CLGD5428
video card with 1024K ram. I've installed the SVGA Xserver and I can get it to
run in a 640x480 mode. I guess it should be possible to run it in a 800x600
mode or even higher.

The question is: what do I put in XF86Config? Can anyone out there help me?
Somebody must have done this before me.


| phone    : +31-15-2785344                  Delft University of Technology  |
|                                            Kluyverweg 1,  2629 HS Delft    |
|                                            The Netherlands                 |


1. Compaq Prolinea 1000 Server 486/66 -Mandrake/Redhat 6.0-6.1b Install

I have gone through and updated all of my primary ROMS on my server, but my
install can't identify my SMART-2SL Raid Controller! Does anybody have any
ideas on this on, I tried Compaq's recommended NCR Chipsets, but they can't
findit, and the Compaq drivers listed under SCSI don't see it, even when I
enter the IRQ and IO.


Thanks guys...

David E.Wright - BRW, Inc.

2. SA_SIGINFO, include files and binary compatibility

3. Compaq prolinea 4/66 RAM issue

4. Watch program available ? ? ?

5. Help! XF86 on compaq prolinea 4/33

6. HP II with Printing System Cartdridge

7. Prolinea 4/66 w/ Tseng 4000 - HELP!

8. libfont.so.1 highlighted in red

9. Xconfig for Compaq Prolinea 4/50 & Compaq SVGA Monitor

10. NEC Ready 4/66 and XF86

11. qlogic QLA2200F/66 with Compaq HSG80?

12. compaq proliant 1850R FSB speed wrong (66 vs. 100)

13. Compaq Deskpro XL/66 H E L P !!!!