by I am using ACER 34T monitor and ET4000/w32i VL bus 2M (DRAM) VGA card
with ASUS PCI motherboard ... using Linux 2.2.0 and kernel 1.2.8 & XFree
3.1.1
when I type startx ... the screen just blank with white color and sometimes
it say the screen mode cannot be resolved ...
but the .xinitrc file already in my home firectory .. and when I use
X -probeonly %> /tmp/x.out .. the x.out hae some special output that I
don't know how to fix ... if any one know how to fix and make the
X-windows work please send me suggection or if anyone have have their
XF86config file work with ET4000/w32i 2M ram .. please send me one
here is my x.out
XFree86 Version 3.1.1 / X Window System
(protocol Version 11, revision 0, vendor release 6000)
Operating System: Linux
Configured drivers:
ET4000W32: accelerated server for ET4000W32 graphics adaptors
(Patchlevel 0):
et4000w32, et4000w32i, et4000w32p_rev_a, et4000w32i_rev_b,
et4000w32i_rev_c, et4000w32p_rev_b, et4000w32p_rev_c,
et4000w32p_rev_d
(using VT number 7)
XF86Config: /etc/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) Mouse: type: MouseSystems, device: /dev/mouse, baudrate: 1200
(**) ET4000W32: Graphics device ID: "ET4000"
(**) ET4000W32: Monitor ID: "Generic Monitor"
(--) ET4000W32: Mode "800x600" needs hsync freq of 35.16 kHz. Deleted.
(--) ET4000W32: Mode "1024x768" needs hsync freq of 35.52 kHz. Deleted.
(--) ET4000W32: Mode "640x480" needs hsync freq of 36.46 kHz. Deleted.
(--) ET4000W32: Mode "800x600" needs hsync freq of 37.88 kHz. Deleted.
(--) ET4000W32: Mode "800x600" needs hsync freq of 48.08 kHz. Deleted.
(--) ET4000W32: Mode "1024x768" needs hsync freq of 48.36 kHz. Deleted.
(--) ET4000W32: Mode "1024x768" needs hsync freq of 56.48 kHz. Deleted.
(--) ET4000W32: Mode "1280x1024" needs hsync freq of 51.02 kHz. Deleted.
(--) ET4000W32: Mode "1280x1024" needs hsync freq of 51.02 kHz. Deleted.
(--) ET4000W32: Mode "1024x768" needs hsync freq of 62.50 kHz. Deleted.
(--) ET4000W32: Mode "1280x1024" needs hsync freq of 64.25 kHz. Deleted.
(--) ET4000W32: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted.
(--) ET4000W32: Mode "320x240" needs hsync freq of 39.38 kHz. Deleted.
(--) ET4000W32: Mode "400x300" needs hsync freq of 35.16 kHz. Deleted.
(--) ET4000W32: Mode "400x300" needs hsync freq of 37.88 kHz. Deleted.
(--) ET4000W32: Mode "400x300" needs hsync freq of 48.08 kHz. Deleted.
(--) ET4000W32: Mode "480x300" needs hsync freq of 35.16 kHz. Deleted.
(--) ET4000W32: Mode "480x300" needs hsync freq of 37.80 kHz. Deleted.
(--) ET4000W32: Mode "480x300" needs hsync freq of 39.56 kHz. Deleted.
(--) ET4000W32: Mode "480x300" needs hsync freq of 48.00 kHz. Deleted.
Warning: The directory "/usr/X11R6/lib/X11/fonts/Type1/" does not exist.
Entry deleted from font path.
Warning: The directory "/usr/X11R6/lib/X11/fonts/Speedo/" does not exist.
Entry deleted from font path.
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75
(--) ET4000W32: ET4000: Initial hibit state: high
Ramdac: ATT20C490
(--) ET4000W32: chipset: et4000w32i_rev_b
(--) ET4000W32: videoram: 2047k
(**) ET4000W32: clocks: 25.17 28.32 32.47 35.97 40.02 35.95 31.48
37.47
(**) ET4000W32: clocks: 50.33 56.65 64.98 71.95 80.03 89.81 63.08
74.96
(--) ET4000W32: Maximum allowed dot-clock: 86.000 MHz
(**) ET4000W32: Mode "640x480": mode clock = 25.175, clock used = 25.170
(--) ET4000W32: There is no mode definition named "800x600"
*** A configured device found, but display modes could not be resolved.***
<*** End of File ***>