Very Computer

XFree86 Version 4.0 / X Window System
(protocol Version 11, revision 0, vendor release 6400)
Release Date: 8 March 2000
 If the server is older than 6-12 months, or if your card is newer
 than the above date, look for a newer version before reporting
 problems.  (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.3.46 i686 [ELF]
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Thu Mar 16 03:29:16 2000
(++) Using config file: "XF86Config.new"
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (??) unknown.
(==) ServerLayout "XFree86 Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "3Dfx Interactive Voodoo3"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/CID/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"

(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7

(II) Module ABI versions:
 XFree86 ANSI C Emulation: 0.1
 XFree86 Video Driver: 0.1
 XFree86 XInput driver : 0.1
 XFree86 Server Extension : 0.1
 XFree86 Font Renderer : 0.1
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
 compiled for 4.0, module version = 1.0.0
 Module class: XFree86 Font Renderer
 ABI class: XFree86 Font Renderer, version 0.1
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
 compiled for 4.0, module version = 0.1.0
 ABI class: XFree86 Video Driver, version 0.1
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,7190 card 0000,0000 rev 03 class 06,00,00
hdr 00
(II) PCI: 00:01:0: chip 8086,7191 card 0000,0000 rev 03 class 06,04,00
hdr 01
(II) PCI: 00:07:0: chip 8086,7110 card 0000,0000 rev 02 class 06,01,00
hdr 80
(II) PCI: 00:07:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80
hdr 00
(II) PCI: 00:07:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00
hdr 00
(II) PCI: 00:07:3: chip 8086,7113 card 0000,0000 rev 02 class 06,80,00
hdr 00
(II) PCI: 01:00:0: chip 121a,0005 card 121a,003a rev 01 class 03,00,00
hdr 00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
 compiled for 4.0, module version = 0.1.0
 ABI class: XFree86 Video Driver, version 0.1
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x88 (VGA_EN is set)
(II) Bus 1 I/O range:
 [0] -1 0x0000d000 - 0x0000dfff (0x1000) IXB
(II) Bus 1 non-prefetchable memory range:
 [0] -1 0xe4000000 - 0xe7ffffff (0x4000000) MXB
(II) Bus 1 prefetchable memory range:
 [0] -1 0xe8000000 - 0xe9ffffff (0x2000000) MXB
(--) PCI:*(1:0:0) 3Dfx Interactive Voodoo3 rev 1, Mem @ 0xe4000000/25,
0xe8000000/25, I/O @ 0xd000/8
(II) Addressable bus resource ranges are
 [0] -1 0x00000000 - 0xffffffff (0x0) MXB
 [1] -1 0x00000000 - 0x0000ffff (0x10000) IXB
(II) OS-reported resource ranges:
 [0] -1 0xffe00000 - 0xffffffff (0x200000) MXB(B)
 [1] -1 0xfee00000 - 0xfeefffff (0x100000) MXB(B)
 [2] -1 0xfec00000 - 0xfecfffff (0x100000) MXB(B)
 [3] -1 0x00100000 - 0x3fffffff (0x3ff00000) MXBE(B)
 [4] -1 0x000f0000 - 0x000fffff (0x10000) MXB
 [5] -1 0x000c0000 - 0x000effff (0x30000) MXB
 [6] -1 0x00000000 - 0x0009ffff (0xa0000) MXB
 [7] -1 0x00000000 - 0x000001ff (0x200) IXBE
(II) Active PCI resource ranges:
 [0] -1 0xe0000000 - 0xe3ffffff (0x4000000) MXBE
 [1] -1 0xe6000000 - 0xe600ffff (0x10000) MXB(B)
 [2] -1 0xe8000000 - 0xe9ffffff (0x2000000) MXB(B)
 [3] -1 0xe4000000 - 0xe5ffffff (0x2000000) MXB(B)
 [4] -1 0x0000e000 - 0x0000e0ff (0x100) IXBE
 [5] -1 0x0000f000 - 0x0000f0ff (0x100) IXBE
 [6] -1 0x0000d000 - 0x0000d0ff (0x100) IXB(B)
(II) Active PCI resource ranges after removing overlaps:
 [0] -1 0xe0000000 - 0xe3ffffff (0x4000000) MXBE
 [1] -1 0xe6000000 - 0xe600ffff (0x10000) MXB(B)
 [2] -1 0xe8000000 - 0xe9ffffff (0x2000000) MXB(B)
 [3] -1 0xe4000000 - 0xe5ffffff (0x2000000) MXB(B)
 [4] -1 0x0000e000 - 0x0000e0ff (0x100) IXBE
 [5] -1 0x0000f000 - 0x0000f0ff (0x100) IXBE
 [6] -1 0x0000d000 - 0x0000d0ff (0x100) IXB(B)
(II) OS-reported resource ranges after removing overlaps with PCI:
 [0] -1 0xffe00000 - 0xffffffff (0x200000) MXB(B)
 [1] -1 0xfee00000 - 0xfeefffff (0x100000) MXB(B)
 [2] -1 0xfec00000 - 0xfecfffff (0x100000) MXB(B)
 [3] -1 0x00100000 - 0x3fffffff (0x3ff00000) MXBE(B)
 [4] -1 0x000f0000 - 0x000fffff (0x10000) MXB
 [5] -1 0x000c0000 - 0x000effff (0x30000) MXB
 [6] -1 0x00000000 - 0x0009ffff (0xa0000) MXB
 [7] -1 0x00000000 - 0x000001ff (0x200) IXBE
(II) All system resource ranges:
 [0] -1 0xffe00000 - 0xffffffff (0x200000) MXB(B)
 [1] -1 0xfee00000 - 0xfeefffff (0x100000) MXB(B)
 [2] -1 0xfec00000 - 0xfecfffff (0x100000) MXB(B)
 [3] -1 0x00100000 - 0x3fffffff (0x3ff00000) MXBE(B)
 [4] -1 0x000f0000 - 0x000fffff (0x10000) MXB
 [5] -1 0x000c0000 - 0x000effff (0x30000) MXB
 [6] -1 0x00000000 - 0x0009ffff (0xa0000) MXB
 [7] -1 0xe0000000 - 0xe3ffffff (0x4000000) MXBE
 [8] -1 0xe6000000 - 0xe600ffff (0x10000) MXB(B)
 [9] -1 0xe8000000 - 0xe9ffffff (0x2000000) MXB(B)
 [10] -1 0xe4000000 - 0xe5ffffff (0x2000000) MXB(B)
 [11] -1 0x00000000 - 0x000001ff (0x200) IXBE
 [12] -1 0x0000e000 - 0x0000e0ff (0x100) IXBE
 [13] -1 0x0000f000 - 0x0000f0ff (0x100) IXBE
 [14] -1 0x0000d000 - 0x0000d0ff (0x100) IXB(B)
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
 compiled for 4.0, module version = 1.0.0
 Module class: XFree86 Server Extension
 ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) LoadModule: "xie"
(II) Loading /usr/X11R6/lib/modules/xie.so
dlopen: /usr/X11R6/lib/modules/xie.so: undefined symbol: XieInitPtr
(EE) Failed to load /usr/X11R6/lib/modules/xie.so
(II) UnloadModule: "xie"
(EE) Failed to load module "xie" (loader failed, 256)
(II) LoadModule: "tdfx"
(II) Loading /usr/X11R6/lib/modules/drivers/tdfx_drv.o
(II) Module tdfx: vendor="The XFree86 Project"
 compiled for 4.0, module version = 1.0.0
 Module class: XFree86 Video Driver
 ABI class: XFree86 Video Driver, version 0.1
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
 compiled for 4.0, module version = 1.0.0
 Module class: XFree86 XInput Driver
 ABI class: XFree86 XInput driver, version 0.1
(II) TDFX: Driver for 3dfx Banshee/Voodoo3 chipsets: 3dfx Banshee,
 3dfx Voodoo3
(--) Chipset 3dfx Voodoo3 found
(II) resource ranges after xf86ClaimFixedResources() call:
 [0] -1 0xffe00000 - 0xffffffff (0x200000) MXB(B)
 [1] -1 0xfee00000 - 0xfeefffff (0x100000) MXB(B)
 [2] -1 0xfec00000 - 0xfecfffff (0x100000) MXB(B)
 [3] -1 0x00100000 - 0x3fffffff (0x3ff00000) MXBE(B)
 [4] -1 0x000f0000 - 0x000fffff (0x10000) MXB
 [5] -1 0x000c0000 - 0x000effff (0x30000) MXB
 [6] -1 0x00000000 - 0x0009ffff (0xa0000) MXB
 [7] -1 0xe0000000 - 0xe3ffffff (0x4000000) MXBE
 [8] -1 0xe6000000 - 0xe600ffff (0x10000) MXB(B)
 [9] -1 0xe8000000 - 0xe9ffffff (0x2000000) MXB(B)
 [10] -1 0xe4000000 - 0xe5ffffff (0x2000000) MXB(B)
 [11] -1 0x00000000 - 0x000001ff (0x200) IXBE
 [12] -1 0x0000e000 - 0x0000e0ff (0x100) IXBE
 [13] -1 0x0000f000 - 0x0000f0ff (0x100) IXBE
 [14] -1 0x0000d000 - 0x0000d0ff (0x100) IXB(B)
(II) resource ranges after probing:
 [0] -1 0xffe00000 - 0xffffffff (0x200000) MXB(B)
 [1] -1 0xfee00000 - 0xfeefffff (0x100000) MXB(B)
 [2] -1 0xfec00000 - 0xfecfffff (0x100000) MXB(B)
 [3] -1 0x00100000 - 0x3fffffff (0x3ff00000) MXBE(B)
 [4] -1 0x000f0000 - 0x000fffff (0x10000) MXB
 [5] -1 0x000c0000 - 0x000effff (0x30000) MXB
 [6] -1 0x00000000 - 0x0009ffff (0xa0000) MXB
 [7] -1 0xe0000000 - 0xe3ffffff (0x4000000) MXBE
 [8] -1 0xe6000000 - 0xe600ffff (0x10000) MXB(B)
 [9] -1 0xe8000000 - 0xe9ffffff (0x2000000) MXB(B)
 [10] -1 0xe4000000 - 0xe5ffffff (0x2000000) MXB(B)
 [11] 0 0x000a0000 - 0x000affff (0x10000) MSB
 [12] 0 0x000b0000 - 0x000b7fff (0x8000) MSB
 [13] 0 0x000b8000 - 0x000bffff (0x8000) MSB
 [14] -1 0x00000000 - 0x000001ff (0x200) IXBE
 [15] -1 0x0000e000 - 0x0000e0ff (0x100) IXBE
 [16] -1 0x0000f000 - 0x0000f0ff (0x100) IXBE
 [17] -1 0x0000d000 - 0x0000d0ff (0x100) IXB(B)
 [18] 0 0x000003b0 - 0x000003bb (0xc) ISB
 [19] 0 0x000003c0 - 0x000003df (0x20) ISB
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
 compiled for 4.0, module version = 1.0.0
 ABI class: XFree86 Video Driver, version 0.1
(II) TDFX(0): Softbooting the board (through the int10 interface).
(II) TDFX(0): Primary V_BIOS segment is: 0xc000
(II) TDFX(0): Softbooting the board succeeded.
(==) TDFX(0): Depth 8, (==) framebuffer bpp 8
(==) TDFX(0): Default visual is PseudoColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
 compiled for 4.0,
...

read more »

< snipped most of error log >

Quote:>  [16] 0 0x0000d000 - 0x0000d0ff (0x100) ISB
>  [17] -1 0x00000000 - 0x000001ff (0x200) IXBE
>  [18] -1 0x0000e000 - 0x0000e0ff (0x100) IXBE
>  [19] -1 0x0000f000 - 0x0000f0ff (0x100) IXBE
>  [20] -1 0x0000d000 - 0x0000d0ff (0x100) IXB(B)
>  [21] 0 0x000003b0 - 0x000003bb (0xc) ISB
>  [22] 0 0x000003c0 - 0x000003df (0x20) ISB
> (==) TDFX(0): Write-combining range (0xe8000000,0x2000000)
> (II) TDFX(0): Textures Memory 2.32 MB

>  This should not happen!
>  An unresolved function was called!

Mark

First, the XF86Config file must load the GLX and DRI modules:

        Section "Module"
        ...
        # This loads the GLX module
            Load       "glx"
        # This loads the DRI module
            Load       "dri"
        EndSection

        Section "DRI"
             Mode 0666
        EndSection

You need that even if you don't want to use dri.

--
He who make the day recreate the sun,
He who make the night recreate the moon,
He who make the storms supplicate us with rain,
He who make the wind supplicate us with force

Quote:>>> ----------------------------------------------- <<<

Marco van Raaij
Sysadmin Van Wijhe Verf BV Zwolle

Did you load the tdfx kernel module? Compiling and loading this
module solved this problem for my Banshee. The module is somewhere
in the XFree86-4.0 source tree ( find . -name \*tdfx\* , look
for something like "os_support").

Torsten
===

I have had the same error messages. But what I discovered is, that somewhere
above in the logfile there is an additional unresolved symbol error listed:

From /var/log/XFree86.0.log:
=========================================================================
...
Supported additional Video Mode:
clock: 105.6 MHz   Image Size:  288 x 230 mm
h_active: 1152  h_sync: 1168  h_sync_end 1264 h_blank_end 1472 h_border:0
v_active: 900  v_sync: 902  v_sync_end 910 v_blanking: 938 v_border: 0
Symbol strlen from module /usr/X11R6/lib/modules/libddc.a is unresolved!
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
(II) do I need RAC?  No, I don't.
=========================================================================

When I run the same XFree binaries (SuSE-6.4 XFree86-4.0.rpm) on the same
type of computer, but with 2x Matrox Millenium cards _and_ different (newer type)
monitor HewlettPackard-P1100, then everything runs fine.
Even with Xinerama over 2x 21" screens - Wow !
Interesting, that the above error line does not appear, and instead of that,
the details of the inquired monitor is listed
(with many more lines before "do I need RAC?"):

===============================================
...
Supported additional Video Mode:
clock: 135.0 MHz   Image Size:  364 x 291 mm
h_active: 1280  h_sync: 1344  h_sync_end 1536 h_blank_end 1688 h_border: 0
v_active: 1024  v_sync: 1027  v_sync_end 1030 v_blanking: 1085 v_border: 0
Monitor name: HP P1100

Serial No: JP85202743

Ranges: V min: 48  V max: 160 Hz, H min: 30  H max: 107 kHz, PixClock max 230 MHz
(II) MGA(0): end of I2C Monitor info

(==) MGA(0): Using gamma correction (1.0, 1.0, 1.0)                                                          
..                                                                                                            
==============================================

This leads me to the assumption, that something is broken with the monitor
manufacturer data inquiry.
I have reported this problem to the XFree86 group, but not got an answer yet.
Is there anybody else with the "unresolved symbol" error.
Next thing I'll try is to plug in my Voodoo3-2000 PCI into the system with
the newer monitors and see if monitor data inquiry works.

BTW, the complained module libddc.a is part of the SuSE rpm package.

Regards,
          Joachim

The problem was, that the tdfx module expects *mandatory* to see two other
modules: glx and dri.

Therfor, the modules section should look like:

Section "Module"
  Load          "dbe"
  Load          "type1"
  Load          "freetype"
  Load          "speedo"
  Load          "extmod"
  Load          "glx"
  Load          "dri"
EndSection

Of course, you need to have these modules installed with your
XFree86-4.0 (rpm) package(s).
With SuSE 6.4, you can get the packages (rpm revs 4.09) from
 ftp://ftp.suse.com/pub/suse/i386/X/XFree86/XFree86-4.0-SuSE/suse64

You can then call sax2 to configure everything with a nicely GUI:
sax2 -m dbe,type1,freetype,glx,dri

Hope this helps,
                   Joachim