RH7.1: Where is ttmkfdir

RH7.1: Where is ttmkfdir

Post by Alex » Sat, 12 May 2001 01:23:33



Hey guys,
In which package on a RH7.1 is included that tiny tool called ttmkfdir used
to import ttf fonts ??

Thanx

 
 
 

RH7.1: Where is ttmkfdir

Post by S. Uma » Sat, 12 May 2001 02:27:39



> Hey guys,
> In which package on a RH7.1 is included that tiny tool called ttmkfdir
> used to import ttf fonts ??

> Thanx

It is in freetype-2.0.1-x
--

Prof. S. Umar
Dept. of Physics & Astronomy
Vanderbilt University
Nashville, TN 37235
Tel : (615) 322-2459
Fax : (615) 343-7263

http://compsci.cas.vanderbilt.edu/~umar/resu.htm

 
 
 

1. What am I doing wrong?....usb tablet Vs rh7.2

hi all.
   I have been trying to get Acecad Flair USB Tablet to
work under redhat 7.3 with xfree4.2.0 & kernel 2.4.18-3.

I put usb support compiled into kernel with UHCI , /dev/hidev support,
HID ,  USB filefs, and event interface support  selected. ie no
modules.

I boot the machine it see all usb devices and the tablet, ok...

ie cat /var/log/messages says...
Jul  9 13:50:28 bob kernel: Manufacturer: ACECAD
Jul  9 13:50:20 bob sysctl: net.ipv4.ip_forward = 0
Jul  9 13:50:28 bob kernel: Product: USB Graphics Tablet
Jul  9 13:50:20 bob sysctl: net.ipv4.conf.default.rp_filter = 1
Jul  9 13:50:28 bob kernel: hiddev0: USB HID v1.10 Pointer [ACECAD USB
Graphics Tablet ] on usb1:2.0
Jul  9 13:50:20 bob sysctl: kernel.sysrq = 0  ....

also /proc/bus/usb/devices says...
T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 0.00
S:  Product=USB UHCI Root Hub
S:  SerialNumber=e000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=255ms
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=1.5 MxCh= 0
D:  Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0460 ProdID=0004 Rev= 0.10
S:  Manufacturer=ACECAD
S:  Product=USB Graphics Tablet
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=02 Driver=hid
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl= 10ms

How do I get the device file for the tablet so so xfree can use it?

Should it just be in /dev/.. after boot or do I do any thing else?

If I try something like..
mknod /dev/usbmouse1 c 180 16   (or 48 etc..)
..when I cat the file I get "No such device"
..and xfree bitches about not been able to open the device.

What minor number do I use for acecad tablets?

-tony

2. 2.4.15: undefined reference to `show_trace_task'

3. Where can I get ttmkfdir?

4. Adding a video card.

5. ttmkfdir segfaults

6. Library problem, or what?

7. Need Help with ttmkfdir

8. Cannot Locate Esound?

9. Type1/TT fonts not recognized by mkfontdir/ttmkfdir

10. TTMKFDIR

11. Looking for binary of ttmkfdir

12. ttmkfdir aborts

13. This clone thing...am I stupid, or am I right?