Very Computer

i cannot get Xwindows to work, as startx always gives back these messages:
-----------------------------------
Configured drivers:
  S3V: accelerated server for S3 graphics adapters (Patchlevel 0)
      s3_ViRGE
(using VT number 7)

XF86Config: /usr/X11R6/lib/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: keycodes: "xfree86"
(**) XKB: types: "default"
(**) XKB: compat: "default"
(**) XKB: symbols: "us(pc101)"
(**) XKB: geometry: "pc"
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc101"
(**) XKB: layout: "gb"
(**) Mouse: type: ps/2, device: /dev/mouse, buttons: 3
(**) S3V: Graphics device ID: "My Video Card"
(**) S3V: Monitor ID: "My Monitor"
(--) S3V: Mode "800x600" needs hsync freq of 35.16 kHz. Deleted.
(--) S3V: Mode "640x480" needs hsync freq of 36.46 kHz. Deleted.
(--) S3V: Mode "800x600" needs hsync freq of 37.88 kHz. Deleted.
(--) S3V: Mode "800x600" needs hsync freq of 48.08 kHz. Deleted.
(--) S3V: Mode "1024x768" needs hsync freq of 48.36 kHz. Deleted.
(--) S3V: Mode "1024x768" needs hsync freq of 56.48 kHz. Deleted.
(--) S3V: Mode "1024x768" needs hsync freq of 62.50 kHz. Deleted.
(--) S3V: Mode "1280x1024" needs hsync freq of 64.25 kHz. Deleted.
(--) S3V: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted.
(--) S3V: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted.
(--) S3V: Mode "320x240" needs hsync freq of 39.38 kHz. Deleted.
(--) S3V: Invalid vertical timing for mode "400x300". Deleted.
(--) S3V: Mode "400x300" needs hsync freq of 37.88 kHz. Deleted.
(--) S3V: Mode "400x300" needs hsync freq of 48.08 kHz. Deleted.
(--) S3V: Mode "480x300" needs hsync freq of 35.16 kHz. Deleted.
(--) S3V: Mode "480x300" needs hsync freq of 37.80 kHz. Deleted.
(--) S3V: Mode "480x300" needs hsync freq of 39.56 kHz. Deleted.
(--) S3V: Mode "480x300" needs hsync freq of 48.00 kHz. Deleted.
Warning: The directory "/usr/X11R6/lib/X11/fonts/100dpi/" does not exist.
         Entry deleted from font path.
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/l
ib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/"

(--) S3V: chipset:   ViRGE/DX rev. 1
(--) S3V: chipset driver: s3_ViRGE
(--) S3V: videoram:  4096k
(--) S3V: Ramdac type: s3_trio64
(--) S3V: Ramdac speed: 170 MHz
(--) S3V: Using Trio32/64 programmable clock (MCLK 50.114 MHz)
(--) S3V: Maximum allowed dot-clock: 170.000 MHz
(**) S3V: Mode "640x480": mode clock =  25.175
(--) S3V: Using 6 bits per RGB value
(--) S3V: videoram usage reduced to 2560k to avoid co-ord overflow
(--) S3V: Virtual resolution set to 640x480
(--) S3V: Local bus LAW is 0xE40xxxxx
(--) S3V: Using a banksize of 2560k, line width of 640

Fatal server error:
Caught signal 11.  Server aborting

When reporting a problem related to a server crash, please send
the full server output, not just the last messages

_X11TransSocketUNIXConnect: Can't connect: errno = 111
giving up.
xinit:  Connection refused (errno 111):  unable to connect to X server
xinit:  No such process (errno 3):  Server error.
---------------------------------------------------------------------------
my system specs are:

SVGA monitor 640x480,
S3V inc, ViRGE /DX/GX V3.42.02

(as I think the problem is with my monitor).

If this is an idiot question I apologise in advance. Thanks for any help.