by Joshua Jacks » Thu, 08 Jan 1998 04:00:00
I was wondering if anyone had gotten the new ATI Rage cards (namely
follows:
P-II 300Mhz
64Mb
Intel EtherExpress Pro 100B
Adaptec UltaWide SCSI Controller
Creative AWE 64
RedHat 5.0
System will start X, but I get several tiled images side-by-side that
each contain about 1/8 of the actual desktop.
Josh
ICQ 6117663
by Paul E. Casm » Thu, 08 Jan 1998 04:00:00
> P-II 300Mhz
> 64Mb
> Intel EtherExpress Pro 100B
> Adaptec UltaWide SCSI Controller
> Creative AWE 64
> RedHat 5.0
> System will start X, but I get several tiled images side-by-side that
> each contain about 1/8 of the actual desktop.
> Josh
> ICQ 6117663
2. SuSE XServer.
Has specific support for the AGP bus and for the card.
see: http://www.suse.de/XSuSE
Good luck.
--
Paul E. Casman
UNICEF Belgium
1. ATI Xpert@Play AGP vs. ATI Xpert@Play 98 AGP
Just wondering if anyone out there is using the either of these cards with
RedHat 5.2 or xfree86 3.3.2. On RH's compatibility list it says the
What I would really like to know is this : is there a difference between
with RH 5.2. Any suggestions of other relatively cheap (around $50) video
cards that are agp and work with RH 5.2 (out of the box) would be really
appreciated.
Dan Finn
3. ati agp xpert98 8MB the same type as ati agp xpert@play 8MB 3D rage pro?
4. system crash
5. Linux Xfree86 runs on LX | VP-3 AGP motherboard slot with ATI Xpert@Play | Xpert@Work
6. Xfree 4.1.0 and SIS630 on Laptop
7. ATI Xpert@Work/Play Rage Pro AGP video
9. Choice: STB 8MB NVidia 3D AGP or ATI XPert 8MB 2X AGP 3D Video?
10. Video card driver for 'ATI XPERT@PLAY 98'
11. ATI XPERT @ PLAY 98 video card and X-Windows
12. x-windows with an ATI Xpert@play video card