S3-964 and wraparound problems

S3-964 and wraparound problems

Post by Benito Carner » Sat, 04 May 1996 04:00:00



Hi,

Does anyone know where to put such flags as

EarlySC
or
InvCLK

in XF86Config file, in order to correct wraparound problems for some S3
servers?
My video card is an Actix Ultra GE64 and tests with xvidtune (a great tool for
fine tuning of your XF86Config file) temporarily suppressed the wrapping
problem.

Thanks in advance

Benito

-
==========================================================================
Benito CARNERO                     | Signal Processing Laboratory
Tel:      +4121 693.43.29          | Electricity Department
Fax:      +4121 693.46.60          | Swiss Federal Institute of Technology

                                   | CH-1015 Ecublens
==========================================================================

 
 
 

S3-964 and wraparound problems

Post by Per Bothn » Mon, 06 May 1996 04:00:00




Quote:>Does anyone know where to put such flags as

>EarlySC
>or
>InvCLK

>in XF86Config file, in order to correct wraparound problems for some S3
>servers?

My XF86Config contains:

Section "Screen"
    Driver "accel"
    Device "DS64"
    Monitor "Shamrock21"
    Subsection "Display"
        depth 8
        Modes  "1600x1200" "1280x1024"  "1024x768"
    Invert_VCLK  "1600x1200" 0
    Early_SC     "1600x1200" 1
    blank_delay "1600x1200" 0
    EndSubsection
EndSection

You can use "*" instead of "1600x1200" to make the command
apply to any mode.

--
        --Per Bothner