Error compiling Gnome core 1.0.41

Error compiling Gnome core 1.0.41

Post by Kevin D. Knerr Sr » Wed, 29 Sep 1999 04:00:00



I've scratched my head, revised the Makefile, and the include statements
to no avail.  While compiling gnome-core-1.0.41, I get the following:

/----- start -----/
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I. -I.        -I../intl      
-I../intl      -I../panel      
-DGNOMELOCALEDIR=\""/usr/share/locale"\"        -I/usr/include
-I/usr/include -DNEED_GNOMESUPPORT_H -I/usr/lib/gnome-libs/include
-I/usr/lib/glib/include -I/usr/X11R6/include -I/usr/lib/glib/include
-I/usr/include  -I/usr/X11R6/include -I/usr/lib/glib/include  -g -O2
-Wall -Wno-unused  -c session.c
session.c: In function `load_default_applets':
session.c:669: `INT_MAX' undeclared (first use this function)
session.c:669: (Each undeclared identifier is reported only once
session.c:669: for each function it appears in.)
session.c: In function `init_user_applets':
session.c:721: `INT_MAX' undeclared (first use this function)
make[2]: *** [session.o] Error 1
make[2]: Leaving directory
`/u/barthel/src/gnome/gnome-core-1.0.41/panel'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/u/barthel/src/gnome/gnome-core-1.0.41'
make: *** [all-recursive-am] Error 2
/----- end -----/

I'm running Slackware 4.0 (libc5), w/ kernel 2.2.12. All prerequisite
libs/apps have been installed/updated. INT_MAX is defined in
/usr/include/limits.h, which is #included in session.c. ./configure was
run w/ "--prefix=/usr --with-included-gettext"

Anyone have any bright ideas?????

TIA

Barthel
--

      Organization: The Pennswald Group -- Linux powered!!

All programmers are optimists.

 
 
 

1. 2.5.40,41, 41-ac1 no DVD-ROM !!!

Hello,

like already repported for 2.5.40 I can't access my DVD-ROM with
ide-scsi (and poorly without it):

Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
hda: QUANTUM FIREBALL CX13.6A, ATA DISK drive
Debug: sleeping function called from illegal context at mm/slab.c:1374
Call Trace: [<c0136f1b>]  [<c01ecfd5>]  [<c01ed077>]  [<c01fec09>]  [<c0206580>]  [<c01fee43>]  [<c0206940>]  [<c01ff2c8>]  [<c01feaf6>]  [<c02106fe>]  [<c01fdd97>]  [<c010507d>]  [<c0105040>]  [<c0105675>]
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: Pioneer DVD-ROM ATAPIModel DVD-103S 011, ATAPI CD/DVD-ROM drive
hdd: IOMEGA ZIP 250 ATAPI, ATAPI FLOPPY drive
Debug: sleeping function called from illegal context at mm/slab.c:1374
Call Trace: [<c0136f1b>]  [<c01ecfd5>]  [<c01ed077>]  [<c01fec09>]  [<c0206580>]  [<c01fee43>]  [<c0206940>]  [<c01ff2c8>]  [<c01feaf6>]  [<c021071d>]  [<c01fdd97>]  [<c010507d>]  [<c0105040>]  [<c0105675>]
ide1 at 0x170-0x177,0x376 on irq 15
hda: host protected area => 1
hda: 26760384 sectors (13701 MB) w/418KiB Cache, CHS=1665/255/63, UDMA(33)
 /dev/ide/host0/bus0/target0/lun0: p1 p2
ide-floppy driver 0.99.newide
hdd: 244766kB, 489532 blocks, 512 sector size
hdd: 244736kB, 239/64/32 CHS, 4096 kBps, 512 sector size, 2941 rpm
hdd: The disk reports a capacity of 250640384 bytes, but the drive only handles 250609664
hdd: The disk reports a capacity of 250640384 bytes, but the drive only handles 250609664
 /dev/ide/host0/bus1/target1/lun0: unknown partition table
 /dev/ide/host0/bus1/target1/lun0: unknown partition table
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
scsi_eh_offline_sdevs: Device offlined - not ready or command retry failed after error recovery: host 0 channel 0 id 0 lun 0
register interface 'mouse' with class 'input

as all files are to be found under http://ulima.unil.ch/greg/linux/
and that I have already repported it, I won't give more unless spefically
demanded ;-))

cdrecord -scanbus don't find anything...

Thank you very much,

        Grgoire
________________________________________________________________

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in

More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

2. Help with, oh yes, sound.

3. might_sleep warning in both 41 and 41-mm1

4. printing/graphics question

5. Probs:Gnome 1.0, aclocal, Esd, cd's, compile errors, dumping core, etc

6. Pre setup for IP-Masq

7. Compile failure with 2.5.41 in serial/core.o

8. Problems building an ncurses app on RH7.1

9. kernel compiles root device as (3,65); boots for (3,41)

10. on boot WARNING: main - swapadd dev hd (1/41) swplo=0 nswap=0 failed (error 22)

11. Error message: named[41]:recvfrom: connection refused

12. forrtl error 41: insufficient virtual memory