DELL system with Diamond Permedia 2

DELL system with Diamond Permedia 2

Post by Fredrik Henbjor » Mon, 06 Jul 1998 04:00:00



Does anyone run Linux on a DELL system with the Diamond Permedia 2 MB 3D
AGP graphics card option? Does the XSuSE_Elsa_GLoria or some other
x-server work (well?) with this card? I finally wonder if the card is,
what on Diamond's homepage is referred to as Fire GL 1000 or if it's a
special OEM variant of it.

--
Fredrik Henbjork


WWW: http://www-und.ida.liu.se/~frehe491

 
 
 

DELL system with Diamond Permedia 2

Post by Kevin Crosb » Tue, 07 Jul 1998 04:00:00


I have a Fire GL 1000 and it is based on the Permedia P2 and is a different
OEM version than the retail product.  I believe that XSuSE_Elsa_GLoria also
handles the regular Diamond Permedia 2.  It appears to work well after an
initial installation, as I have installed it today.

I am going to post more detailed instructions on how to set it up, since
others have asked.

Kevin Crosby


> Does anyone run Linux on a DELL system with the Diamond Permedia 2 MB 3D
> AGP graphics card option? Does the XSuSE_Elsa_GLoria or some other
> x-server work (well?) with this card? I finally wonder if the card is,
> what on Diamond's homepage is referred to as Fire GL 1000 or if it's a
> special OEM variant of it.

> --
> Fredrik Henbjork


> WWW: http://www-und.ida.liu.se/~frehe491

--

                                Kevin Crosby



 
 
 

DELL system with Diamond Permedia 2

Post by Jorge Herrer » Sat, 11 Jul 1998 04:00:00


The XSuSE_Elsa_GLoria  Server works VERY well on my XPSR 400 with the Fire
GL 100 pro and a 21" monitor.

The card is the Diamond OEM version, the only difference is that it does not
have 3d glasses output.

- Jorge Herrera


>Does anyone run Linux on a DELL system with the Diamond Permedia 2 MB 3D
>AGP graphics card option? Does the XSuSE_Elsa_GLoria or some other
>x-server work (well?) with this card? I finally wonder if the card is,
>what on Diamond's homepage is referred to as Fire GL 1000 or if it's a
>special OEM variant of it.

>--
>Fredrik Henbjork


>WWW: http://www-und.ida.liu.se/~frehe491

 
 
 

DELL system with Diamond Permedia 2

Post by Thomas Levi » Mon, 13 Jul 1998 04:00:00



> Does anyone run Linux on a DELL system with the Diamond Permedia 2 MB 3D
> AGP graphics card option? Does the XSuSE_Elsa_GLoria or some other
> x-server work (well?) with this card? I finally wonder if the card is,
> what on Diamond's homepage is referred to as Fire GL 1000 or if it's a
> special OEM variant of it.

> --
> Fredrik Henbjork


> WWW: http://www-und.ida.liu.se/~frehe491

  i`m using a diamond fire gl 1000 pro and used the xsuse server under
several distributions. it`s working great better then with my old matrox
mystique.
permedia 2 is from 3dlabs and oem products are made by diamond, creative
labs (4mb only version)

have fun

Thomas

 
 
 

DELL system with Diamond Permedia 2

Post by Trygve Anderso » Mon, 13 Jul 1998 04:00:00



> Does anyone run Linux on a DELL system with the Diamond Permedia 2 MB 3D
> AGP graphics card option? Does the XSuSE_Elsa_GLoria or some other
> x-server work (well?) with this card? I finally wonder if the card is,
> what on Diamond's homepage is referred to as Fire GL 1000 or if it's a
> special OEM variant of it.

> --
> Fredrik Henbjork


> WWW: http://www-und.ida.liu.se/~frehe491

You can purchase Metro-X for $39 - I use it and it works fine.  You do
need the patch from their web site however
 
 
 

1. Probleme mit 3DLabs Permedia 2v (onboard) / Problems with 3DLabs Permedia 2v (onboard)

Hallo!

Auf Arbeit nutze ich eine DIGITAL Workstation mit onboard 3DLabs
Permedia 2v Grafikchip. Leider bekomme ich unter X11 Version 4 (KDE
2.xx, SuSE 7.2 bzw. 7.3)  bei Verwendung des glint-Treibers mie 16bit
und 1280x1024 Streifen und falsche Farbmuster an den Titel- und
Menleisten sowie an den Scrollbalken. Gibt es generelle Probleme mit
onboard Grafikcontrollern dieses Typs? Was kann ich tun?

Mit freundlichen Gr?en
J?rg Emmelmann

Hello!

At work I use a DIGITAL workstation with onboard 3DLabs Permedia 2v
Video controller. Unfortunately I get in X11 Version 4 (KDE 2.xx, SuSE
7.2 respective 7.3) when I use the glint driver with 16 bit and
1280x1024 stripes and false colour patterns at the titlebars menubards
and scrollbars. Are there general problems with onboard Video
controllers of this type? What can I do?

With kind reards
Joerg Emmelmann

2. Too many hacker attempts to my web server.

3. diamond permedia apg card under RH 5.0?

4. shared Memory Vs Sockets

5. XFree86 drivers for the Diamond Permedia 2 AGP

6. Running GDB 4.5 on Fortran programs.

7. Diamond Permedia 2 AGP X server?

8. solaris format error

9. help: Permedia 2 (Diamond FireGL 1000 Pro)

10. Diamond Fire 1000/Permedia

11. HELP! Diamond Permedia II AGP

12. Diamond Permedia (FireGL1000) AGP Video Card

13. Diamond FireGL Pro 8Meg Permedia II in 16bpp mode in X