Very Computer

by **Beverly Frie** » Fri, 19 Jan 1996 04:00:00

Keywords:

I have installed the above card and configured it with xf86config and it
works with all the resolutions which can be switched around with cntrl alt
+numeric.
However there is a slight problem that it displays about 90% of the
screen, missing about 2cm on the left and 1cm on the top. This must be a driver
problem as when I use windows95 with the ATI drivers the whole screen is used.
I can always correct with the monitor amplifiers but would have to
re-adjust when using windows95.
Has anyone else seen and managed to correct this problem?

--
Cheers Bev.
*************************************************

* Tel Switzerland (022) 7672482 *
* Fax Switzerland (022) 7673100 *
*************************************************
--
Cheers Bev.
*************************************************

* Tel Switzerland (022) 7672482 *

by **fchschnei..** » Thu, 25 Jan 1996 04:00:00

> Newsgroups: comp.os.linux.x
> Path:

news.pi.net!news.nic.surfnet.nl!howland.reston.ans.net!newsfeed.internetmci.com!
EU.net!CERN.ch!chorus2!friend

> Subject: ATI Graphics Pro Turbo mach64
> X-Nntp-Posting-Host: chorus2.cern.ch

> Organization: CERN, European Laboratory for Particle Physics
> X-Newsreader: mxrn 6.18-30
> Date: Thu, 18 Jan 1996 09:38:42 GMT
> Lines: 25

> Keywords:

> I have installed the above card and configured it with xf86config and it
> works with all the resolutions which can be switched around with cntrl alt
> +numeric.
> However there is a slight problem that it displays about 90% of the
> screen, missing about 2cm on the left and 1cm on the top. This must be a
driver
> problem as when I use windows95 with the ATI drivers the whole screen is used.
> I can always correct with the monitor amplifiers but would have to
> re-adjust when using windows95.
> Has anyone else seen and managed to correct this problem?

> --
> Cheers Bev.
> *************************************************

> * Tel Switzerland (022) 7672482 *
> * Fax Switzerland (022) 7673100 *
> *************************************************
> --
> Cheers Bev.
> *************************************************

> * Tel Switzerland (022) 7672482 *

It seems tou solved the problem many of us are working on since you got the
board running!!

Please send me some details on which XFree you're using and could you post your
XFreeConfig file??

Thanks, Frans Schneider