by hey all, i recently purchased an asus b1 laptop, i installed slackware
on which configure my graphics device to be the frame buffer, which is
fine except for the lack of xvideo support, a must have for watching
dvd's. i recentlu upgraded to version 4.2.0,and changed the driver
from fbdev to svage, but for some reason the mouse pointer apperas
off, it appears higher on the screen relative to its actual position.
and when i mnage to bring up vlc or mplayer, switching to full screen
with xv output, it is not fully full screen, the part that is not
being used by the video is blue. also, how d i get x to see my windows
fonts, at the moment my fonts under fluxbox and kde are disgusting, i
copied windows ttf fonts to /usr/X11R6/lib/X11/fonts/TTF, but
mkfontdir does not add them. below is my XF86Config-4 file, any help
would be much appreciated.
# File generated by XFdrake. #
**********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format
of
# this file.
# **********************************************************************
Section "Files" RgbPath"/usr/X11R6/lib/X11/rgb" # Multiple
FontPath entries are allowed (they are concatenated together)
# By default, Mandrake 6.0 and later now use a font server independent
of
# the X server to render fonts. FontPath
"/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic/"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/"
FontPath "/usr/X11R6/lib/X11/fonts/TTF/" EndSection #
**********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags" # Uncomment this to cause a core dump at the
spot where a signal is
# received. This may leave the console in an unusable state, but
may
# provide a better stack trace in the core dump to aid in
debugging
#NoTrapSignals # Uncomment this to disable the <Crtl><Alt><BS>
server abort sequence
# This allows clients to receive this key event.
#DontZap # Uncomment this to disable the
<Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
#DontZoom # This allows the server to start up even if the
# mouse device can't be opened/initialised.
# AllowMouseOpenFail EndSection #
**********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Keyboard section
# **********************************************************************
Section "InputDevice" Identifier "Keyboard1"
Driver "Keyboard"
Option "AutoRepeat" "250 30" Option "XkbRules" "xfree86"
Option "XkbModel" "pc101"
Option "XkbLayout" "us" EndSection #
**********************************************************************
# Pointer section
# **********************************************************************
Section "InputDevice" Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "PS/2"
Option "Device" "/dev/misc/psaux"
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50" # ChordMiddle is an option for some
3-button Logitech mice # Option "ChordMiddle" EndSection Section
"Module" # This loads the DBE extension module. # Load"dbe" # This
loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection"extmod"
#Option"omit xfree86-dga"
EndSubSection # This loads the Type1 and FreeType font modules
Load"type1"
Load"freetype"
EndSection # **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present Section "Monitor"
Identifier "Generic|Generic Laptop Display Panel 1024x768"
VendorName "Generic"
ModelName "Unknown" # HorizSync is in kHz unless units are
specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
#HorizSync 31.5-48.5
HorizSync 30-70 # VertRefresh is in Hz unless units are
specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
#VertRefresh 40-70
VertRefresh 50-100 # This is a set of extended mode timings
typically used for laptop,
# TV fullscreen mode or DVD fullscreen output.
# These are available along with standard mode timings. # Sony Vaio
C1(X,XS,VE,VN)?
ModeLine "1024x480" 65.00 1024 1032 1176 1344 480 488 494 563
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
EndSection # **********************************************************************
# Graphics device section
# **********************************************************************
Section "Device"
Identifier "Generic VGA"
Driver "vga"
EndSection Section "Device"
Identifier "Savage Twister"
VendorName "Unknown"
BoardName "Unknown"
Driver "fbdev"
# Option "DPMS" "on"
EndSection # **********************************************************************
# Screen sections
# **********************************************************************
Section "Screen"
Identifier "screen1"
Device "Savage Twister"
Monitor "Generic|Generic Laptop Display Panel 1024x768"
DefaultColorDepth 16
Subsection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection Section "ServerLayout"
Identifier "layout1"
Screen "screen1" InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection