Board index Linux X

A question about xset and the Frame Buffer Device

A question about xset and the Frame Buffer Device

Post by sgalla.. » Thu, 20 Apr 2000 04:00:00



Hi folks,

I am running Debian 2.2 (code name Potato) on an IBM 300PL with an S3
Trio3D video card/monitor.  I am running XFree86 3.3.6 and using the FBDev
x-server because this video chip is not well supported (chip id 86C366).

My problem is this:  the Screen Saver never activates.  It is set for
a ten minute delay, but it never kicks in.  Even if I type the 'xset s
activate' command it just returns.

Any thoughts, ideas, and/or solutions will be appreciated.

Thanks for your time,

scottg

 
 
 
Top

1. intel740 frame-buffer device driver

i wrote intel740 frame-buffer driver. i tested it with my hardware
with kernels 2.4.8, 2.4.14, 2.4.17 and 2.5.5.

you can download the patch
http://i740fbdev.sourceforge.net/download/patch-2.5.5-i740fb-020225.d...

if anybody tested it, please drop me a report

--
With best regards, Andrey Ulanov.
mailto: drey<at>au.ru
XMMS: Tiamat - So Much For Suicide
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in

More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

2. auto-switch to virtual terminal

3. frame buffer device now supported?

4. Screen Size Trouble

5. Frame Buffer Device

6. AlphaStation 200 Installation Problems - HELP PLEASE!

7. 2.2.9 kernel, frame buffer device

8. Palm VX on Linux

9. device driver for peritek frame buffer.....

10. Current status of Frame Buffer devices - consoles and X?

11. Second Frame buffer device, XFree Multihead - Possible?

12. frame buffer device with nbsd i386?

13. SVGA and Frame Buffer Devices


All times are UTC
Board index