by I just upgraded to Slackware 2.2.0.1. Now when
I try to exit X, my display goes blank and
my console is dead. I get the same results
if I try to switch VTs (Crtl-Alt-Fn). The
only solution is a hard reboot. The keyboard
seems to be dead - Ctrl-Alt-Del doesn't work.
The details:
Linux 1.2.3 (idenet kernel from Slackware 2.2.0.1)
XF3.1.1, SVGA server
ATI VGAWonder, 800x600 mode
Logitech 3 button mouse
olvwm window manager
X -probeonly recognizes my card, and X runs fine.
Output of /usr/X11/bin/openwin:
XFree86 Version 3.1.1 / X Window System
(protocol Version 11, revision 0, vendor release 6000)
Operating System: Linux
Configured drivers:
SVGA: server for 8-bit colour SVGA (Patchlevel 0):
et4000, et4000w32, et4000w32i, et4000w32p, et3000, pvga1, wd90c00,
wd90c10, wd90c30, wd90c31, wd90c33, gvga, vgawonder, tvga8800cs,
tvga8900b, tvga8900c, tvga8900cl, tvga9000, clgd5420, clgd5422,
clgd5424, clgd5426, clgd5428, clgd5429, clgd5430, clgd5434, clgd6205,
clgd6215, clgd6225, clgd6235, ncr77c22, ncr77c22e, cpq_avga, oti067,
oti077, oti087, mx, al2101, ali2228, ali2301, ali2302, ali2308,
ali2401, cl6410, cl6412, cl6420, cl6440, video7, ct65520, ct65530,
ct65540, ct65545, generic
(using VT number 7)
(--) SVGA: ATI/vgawonder driver patchlevel 1
ATI 18800-1 graphics controller detected.
Brooktree 476 or similar RAMDAC detected.
This is a VGA Wonder V5 video adapter.
ATI 18810 or similar clock chip detected.
(--) SVGA: Maximum allowed dot-clock: 80.000 MHz
(--) SVGA: SpeedUp code selection modified because virtualX != 1024
sh: /lib/cpp: No such file or directory
xterm: fatal IO error 2 (Broken pipe) or KillClient on X server ":0.0"
/var/X11R6/lib/XF86Config:
Section "Files"
FontPath "/usr/X386/lib/X11/fonts/misc/"
FontPath "/usr/X386/lib/X11/fonts/75dpi/"
RGBPath "/usr/X386/lib/X11/rgb"
EndSection
Section "ServerFlags"
EndSection
Section "Keyboard"
Protocol "Standard"
AutoRepeat 500 5
ServerNumLock
EndSection
Section "Pointer"
Protocol "logitech"
Device "/dev/mouse"
EndSection
Section "Monitor"
Identifier "CrystalScan1024"
VendorName "Unknown"
ModelName "Unknown"
BandWidth 45
HorizSync 30-37
VertRefresh 45-90
ModeLine "800x600" 36 800 832 976 1016 600 604 606 634
EndSection
Section "Device"
Identifier "VGAWonder"
VendorName "Unknown"
BoardName "Unknown"
Chipset "vgawonder"
# Clocks 18 22 25 28 36 44 50 56 30 32 37 39 40 0 75 65
Clocks 30.240 32.000 37.500 39.000 42.954 48.771 0.000 36.000
Clocks 40.000 56.644 75.000 65.000 50.350 56.640 0.000 44.900
Clocks 15.120 16.000 18.750 19.500 21.477 24.386 0.000 18.000
Clocks 20.000 28.322 37.500 32.500 25.175 28.320 0.000 22.450
Clocks 10.080 10.667 12.500 13.000 14.318 16.257 0.000 12.000
Clocks 13.333 18.881 25.000 21.667 16.783 18.880 0.000 14.967
Clocks 7.560 8.000 9.375 9.750 10.739 12.193 0.000 9.000
Clocks 10.000 14.161 18.750 16.250 12.586 14.160 0.000 11.225
EndSection
Section "Screen"
Driver "vga256"
Device "VGAWonder"
Monitor "CrystalScan1024"
Subsection "Display"
Modes "800x600"
ViewPort 0 0
Virtual 800 600
EndSubsection
EndSection
Thanks,
Todd
--
Todd Greenfield
Dallas Semiconductor