Xfree and Samsung 6Ne CRT, need specs.

Xfree and Samsung 6Ne CRT, need specs.

Post by Jeff Pierc » Wed, 11 Jul 2001 22:38:55

I am installing Xfree86 4.1 on a system with a Nvidia GforceMX2 and a
Samsung 6Ne CRT. I have no manual for the crt and need the sync
frequencies, etc for XF86config. I went to the Samsung site and
naturally the link to the 6Ne manuals .pdf is a broken link.

So, can anybody send me the specs needed, or a sample XF86config for the

I remember at on time a large file with a whole lot of Xf86config
tables, but I cann't remeber where it was.

Jeff Pierce


-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----==  Over 80,000 Newsgroups - 16 Different Servers! =-----


1. Modem Spec for Samsung monitor needed


I have been having a lot of problems trying to get the correct
configuration of X for my monitor.

I have a Samsung SyncMaster 3.  I believe the model number is CVM478.

I have the  manual but I cannot make headway with it.  This monitor
does not seem to be supported in the documentation.

I have included part of the spec in the manual.  Perhaps someone can
then give me the correct settings.

Dot Pitch 0.28 / 0.31 / 0.39 / 0.41 mm

Scanning Frequency:

31.47KHz / 70Hz,  31.47KHz / 60Hz, 35.5KHz / 87Hz,
37.86KHz / 72.8Hz, 35.15KHz / 56Hz, 37.88KHz / 60.3Hz

Maximum Resolution (Interlaced mode)
Horizontal      1024 dots
Vertical                678 Lines

Video Band Width (Pixel Time)   Maximum 45 MHz

2. Information about NFS automounter

3. Old Monitor Specs - Samsung

4. PVCS Version 2 compatible programs

5. : VI malfunction with MCC

6. Older Monitor Specs - Samsung Monochrome

7. news-reader for text-console?

8. How can send me Modeline for XFree, Monitors (TVM AS 5G) & (Samsung SyncMaster 17GLi)?

9. XFree, SpeedstarPro, and Samsung Syncmaster 3

10. Need help configuring an Hitachi CRT display

11. Matrox Mystique ands X.

12. I need crt driver !!!