Avance Logic ALG2301 config file?

Avance Logic ALG2301 config file?

Post by oatm.. » Fri, 29 Dec 1995 04:00:00



I have an Avance Logic ALG2301 card with 1MB of memory.  Does anyone know way I might be able to find a Xconfig or XF86config file for it?  I tried running
XF86config but even though it know what kind of card it is, it comes up with a "No modes supplied in XF86Config"  I've been trying to get Xwindows up and running for
about 6 months now.  I would really appreciate any help.  Thanks in advance.

-Oatmeal

 
 
 

1. Avance Logic ALG2301 Video Card

I have one of the above mentioned cards and have a question:
Can I run it, in a resolution of 640x480, with or without a virtual
resolution, in 16 or 24bpp. I find 8bpp very limiting. Under Microsoft
Windoze, I can run in a choice of resolutions including: 640x480x24bpp,
800x600x8bpp and 1024x768x8bpp. I have 1MB Video DRAM. Would it help to
remove my current 1024x768 virtual resolution?

The ALG2301 has been removed from production by Avance, and is in effect
"retired", although XFree 3.2 does have support for it. I am running
RedHat Linux 4.1.

Monitor Timing Info:
Resolution    Vertical Freq.     Horizontal Freq.
640x480           73                  37.8
800x600           72                  48.1
1024x768          60                  48.4

 All Resolutions are VESA SVGA (at least, thats what the monitor manual
calls them). The monitor is unbranded, and simply has UltraScan written
on the front, and is called an XGA Colour Monitor (how helpful :))
All frequencies are in Hertz. Under Windoze, I used a utility, provided
by Avance, called ASCAN, which could be used to set scan rates. Is such
a utility available for Linux, or can I use XVidTune, which I haven't
tried yet, for fear of blowing up my monitor.

Timing Info for ALG2301:
Resolution    Vertical Freq.     Horizontal Freq.
640x480         60, 72, 75         31.5, 37.5, 37.5    
800x600         56, 60, 72         35.5, 37.5, 48.8
1024x768             INFORMATION NOT AVAILABLE

Under Windoze, I use a scan rate of vertical refresh frequency of 70Hz
at a resolution of 800x600 in 8bpp colour, or a refresh of 75Hz at
640x480 in 24bpp.

Any help is greatly appreciated. Please reply via email, and in the
newsgroup if you feel your message would benefit other users of the
ALG2301.

Regards
Richard .H. Smith
London, United Kingdom
-----------------------

2. LSM: RELEASE!! 20MAY94

3. Avance Logic ALG2301 2MB - server for XFree86 (X11R6) ?

4. xf86 4.01 oddness

5. Config file for Avance Logic DSP-2228 (VLB)

6. How to add SCSI disk to x86?

7. Avance logic ALS 100+/redhat 5.1 snd config

8. Cannot remove AHA-2940UW controller without causing boot to fail

9. Avance logic ALS 300 PCI config. for mdk6

10. PCI avance logic ALS 300 soundcard config with mandrake 6.0

11. Avance ALG2301 card and XFree 3.1

12. Advanced logic ALG2301 : Xconfig

13. Avavne Logic ALG2301 Problems