S3-964...possible bug in S3 server

S3-964...possible bug in S3 server

Post by Doc » Sun, 02 Apr 1995 04:00:00



Ok I have a #9GXE64-pro in an AIR 54CEP motherboard... While running X in
16-bit or 32-bit color and switching to a vc the machine will restart xdm...
I thought it might be a configuration problem or a bug in the #9 but I have
also seen this on a Diamond Stealth 64 in another machine... so now I am
beginning to wonder if its a bug in the S3 server and the 964... if anyone
has one of these two boards working in a machine I would like a copy of
your XF86Config file to test that....  Here is my XF86Config file:

--Inserted file begins here--  

Section "Files"

    RgbPath     "/usr/X11R6/lib/X11/rgb"

    FontPath    "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath    "/usr/X11R6/lib/X11/fonts/Type1/"
    FontPath    "/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath    "/usr/X11R6/lib/X11/fonts/75dpi/"
    FontPath    "/usr/X11R6/lib/X11/fonts/100dpi/"

EndSection

Section "ServerFlags"

EndSection

Section "Keyboard"

    Protocol    "Standard"
    AutoRepeat  500 5

EndSection

Section "Pointer"
    Protocol    "MouseMan"
    Device      "/dev/mouse"

EndSection

Section "Monitor"

    Identifier  "Applepos"
    VendorName  "Apple"
    ModelName   "Multiscan-17"
    HorizSync   31.5 - 64.3
    VertRefresh 50-90


Modeline "640x480"     31.5   640  680  720  864   480  488  491  521


Modeline "800x600"     50     800  856  976 1040   600  637  643  666 +hsync +vsync


#Modeline "1280x1024"   80    1280 1296 1512 1568  1024 1025 1037 1165 Interlace


Modeline "1024x768"    85    1024 1032 1152 1360   768  784  787  823

#Modeline "1280x1024"  110    1280 1328 1512 1712  1024 1025 1028 1054


#Modeline "1280x1024"  135    1280 1312 1456 1712  1024 1027 1030 1064

EndSection

Section "Device"
    Identifier  "Number9"
    VendorName  "Number9"
    BoardName   "64GXE-pro"
    VideoRam    2048
    Option "dac_8_bit"
    Option "number_nine"
    Ramdac      "ti3025"
    Clockchip   "ti3025"
EndSection

# **********************************************************************
# Screen sections
# **********************************************************************
# The accelerated servers (S3, Mach32, Mach8, 8514, P9000, AGX, W32, Mach64)

Section "Screen"
    Driver      "accel"
    Device      "Number9"
    Monitor     "Applepos"
    Subsection "Display"
        Depth       16
        Modes       "1024x768" "800x600" "640x480"
        ViewPort    0 0
        Virtual     1024 768
    EndSubsection
EndSection

-- Inserted file ends --

Any suggestions would be most helpful as I want to run Highcolor.

Thanks,
Jeff
--

 "Its not a good day to be a bad guy..."           --The Crow