/usr/X11R6/lib/X11/Xcms.txt

/usr/X11R6/lib/X11/Xcms.txt

Post by Sead Mujus » Wed, 28 Dec 1994 15:54:35



        I try and run X programs like xclock -bg red & and it stops
        with a segmentation fault because it needs a file called
        /usr/X11R6/lib/X11/Xcms.txt

Quote:> stat("/usr/X11R6/lib/X11/Xcms.txt", 0xbfffddd8) = -1 (No such file or directory)
>  - [SIGSEGV]
>  + [SIGSEGV]

        How do I create the file from my rgb.txt file or should it have
        been installed in my Slackware 2.1 distribution and wasn't?
        Any help would GREATLY appreciated....
        Cheers,
                              ,,,
                             (o o)           _/ University of Melbourne
 ------------------------oOO--(_)--OOo----  _/  --------------------------
         _/_/_/_/   _/_/      _/_/_/   _/_/_/     Ph: (03) 344-5120
      _/         _/    _/  _/    _/  _/   _/  Office: (03) 344-5116
       _/_/_/   _/_/_/_/  _/    _/  _/   _/     Home: (03) 364-9107
            _/  _/       _/    _/  _/   _/  Sead Mujushi : Sys Admin

 -------------------------(__)---(__)-------------------------------------
--
                              ,,,
                             (o o)           _/ University of Melbourne
 ------------------------oOO--(_)--OOo----  _/  --------------------------
         _/_/_/_/   _/_/      _/_/_/   _/_/_/     Ph: (03) 344-5120
 
 
 

1. Upgrading to 4.6.2...X11 config in /usr/X11R6/lib/X11 or /etc/X11?

During the next week, I plan to upgrade my machine to 4.6.2.  When I
installed the installation of X11 that I have now, I built it from
source with the ports tree, and it put the config files in the normal
location /usr/X11R6/lib/X11.
        However, I'm aware that in the past, FreeBSD has packaged the
X configs to go into /etc/X11, and I also remember that back when I was
running 4.4 on a different machine, the port asked you before the build
which of the two locations you'd like your X configs to go to.
        What I'm wondering is this:  If I do the upgrade, and have it
upgrade my X-Window installation, is it going to be smart enough to see
which place to look for my configuration?  I like freedom of choice with
things like this, but I hope the package tools are keeping all this
freedom in mind at upgrade time.

Anybody done the upgrade already on a machine with the configs in /usr?

--
|-+{ Brent A. Busby  } +-|  "Elstree...? Remember me? I had a part in |

|-+  Normal, IL  (USA) |-|   history. Look at me. Now I work for the  |
|-*  FreeBSD UNIX 4.5  *-|   BBC.   Life is not what it used to be."  |

2. Jumpstart Question

3. /usr/X386/lib/X11 <-> /usr/lib/X11

4. Adaptec RAID controllers

5. VNC: Couldn't open RGB_DB '/usr/lib/X11/rgb.txt'

6. +@netgroup in passwd file in 2.X ??

7. Do you have /usr/X11R6/lib/X11/rgb

8. dlopen() and references to shared libaries

9. Could not init font path element /usr/X11R6/lib/X11/fonts/Speedo

10. changing /usr/X11R6/lib/X11/app-defaults for 1 user only

11. rgb.txt replaced by Xcms.txt?

12. /usr/x11r6/lib/x11/xserver/SecurityPolicy Installation Error!!!

13. Config Error: /usr/X11R6/lib/X11/XF86Config:205