"cat /proc/mtrr" doesn't display anything?

"cat /proc/mtrr" doesn't display anything?

Post by Id E » Thu, 07 Sep 2000 03:42:46



AMD K6-2 3DNow! 400MHz, Gigabyte GA-5AX motherboard, 128MB RAM,
running 2.4-test7, kernel compiled with CONFIG_MK6 and CONFIG_MTRR.

given the above configuration, shouldn't "cat /proc/mtrr" show something?

 
 
 

1. Why doesn't echo "text" 'command' "more text" work?

                 ^                                        ^
Wrong quotes, should be -
   echo "You have" `grep Subject: /usr/spool/mail/me | wc -l` "messages."
or -
   echo "You have `grep Subject: /usr/spool/mail/me | wc -l` messages."

But, another problem is, if you've no mail, /usr/spool/mail/me does not
exist, leading grep to say:
   grep: can't open /usr/spool/mail/me
Wc will still report 0.

You might try -
   sh -c 'echo "You have `grep 2>/dev/null Subject: /usr/spool/mail/me | wc -l` messages."'

Hope this helps.

2. Add validity check the first entry of FAT (2/5)

3. MySQL rocks the industry...

4. """"""""My SoundBlast 16 pnp isn't up yet""""""""""""

5. DNS setup on Linux bow w/ cable modem

6. GETSERVBYNAME()????????????????????"""""""""""""

7. sendmail timedelay

8. patch doesn't "do" anything, I have to control c

9. New: kernel prints "mtrr: MTRR 2 not used" twice when exiting X

10. kfm: "Open with...." doesn't show anything to open with

11. STARTX: "No Screens Found"/"Can't find Display"

12. Screen doesn't unblank with "screenblank" and "xlock" under 2.3