Very Computer

1. SIIG SCSI Controller SCSI-PRO VL

I've got a SIIG SCSI controller that I'm trying to get my 1.2.13 (or 1.3.81)
linux box to see. It's supposed to "coexist with an existing IDE controller",
although I can't tell you what that's supposed to mean. Using debug, I got the
following output when querying the controller's BIOS:

C:\>debug
-d c800:0
C800:0000  55 AA 10 EB 7F E9 99 0B-00 00 00 00 00 00 00 00   U...............
C800:0010  58 4C 2D 35 32 31 2F 35-32 35 20 22 45 75 72 65   XL-521/525 "Eure
C800:0020  6B 61 22 20 56 4C 2D 42-75 73 20 53 43 53 49 20   ka" VL-Bus SCSI
C800:0030  48 6F 73 74 20 41 64 61-70 74 65 72 20 28 63 29   Host Adapter (c)
C800:0040  20 43 6F 70 79 72 69 67-68 74 20 31 39 39 33 2D    Copyright 1993-
C800:0050  39 34 2C 20 58 69 72 6C-69 6E 6B 20 49 6E 63 2E   94, Xirlink Inc.
C800:0060  2C 20 56 65 72 73 69 6F-6E 20 31 2E 30 2E 32 20   , Version 1.0.2
C800:0070  41 6C 6C 20 52 69 67 68-74 73 20 52 65 73 65 72   All Rights Reser
-q

The card itself resides at I/O address 160-16f, BIOS address is c800 (0xc8000),
interrupt 11. Linux just gives me a "0 Hosts Detected" message at bootup, and I
can't even get it to recognize it using lilo boot parameters. Has anyone used
this card, or know how I might get it to work? Looking at the board itself, the
only distinguishing mark it has is that it has a Qlogic FAS246 chip on it.
(Enabling Qlogic SCSI has no effect, have gone through just about every low
level driver that remotely looked like it might work.)

2. LOW-low level debugging

3. Help with SIIG, Inc. SCSI-PRO SCSI Controller

4. UK keyboard and the ￡ sign

5. Is SIIG SCSI Pro VL supported by Linux

6. 1.1.83 and PCMCIA ethernet

7. SIIG SCSI-PRO Controller Driver

8. fips or Partition Magic?

9. Anyone seen Advansys3.1E lock ups w/SIIG ABP940U(SIIG SCSI FAST PRO PCI)

10. SIIG SCSI Pro VLB Controller

11. Q: Linux support for SIIG SCSI-PRO (XL-221) card?

12. Need boot kernal for SBPCD & SCSI-Pro VL

13. One SCSI controller is not recognized with another SCSI controller