by >=20
> Hi there,
>=20
>=20
> : With XFree86 v. 3.1.2 this card is supported. It is only in the SVGA
> : driver supported, but you can use a resulotion of 1024x768x256. You hav=
e
> : to define that chipset in your XF86Config file explicitly. I did it for
> : me and it works like a champ.
>=20
> I have a similar card - could you tell me exactly how you define it in=20
> XF86Config? I have only been able to find references to the ALI-2101 and=
=20
> if I use that it doesn't handle the high res modes - at least this is=20
> what SuperProbe tells me I have, although it is definitely a 2301.
>=20
=20
of my XF86Config:
---[snip]---
Section "Monitor"
Identifier "Highscreen MS 1457 LE-II"
VendorName "Vobis"
ModelName "MS 1457 LE-II"
BandWidth 110.0=09# MHz
HorizSync 29.0-60.0=09# KHz
VertRefresh 47.0-100.0=09# KHz
ModeLine "640x600" 25.2 640 664 760 800 480 491 493 525
ModeLine "640x480" 25 640 664 760 800 480 491 493 525
ModeLine "800x600" 36 800 832 976 1024 600 601 603 625
ModeLine "800x600" 39 800 872 968 1104 600 600 606 624
ModeLine "1024x768" 75 1024 1048 1184 1328 768 771 777 806 -hsync -vsyn=
c
ModeLine "1024x768" 85 1024 1032 1152 1360 768 784 787 823
ModeLine "1024x768" 80 1024 1056 1360 1392 768 768 780 806
ModeLine "1024x768.72Hz" 72 1024 1048 1184 1328 768 778 779 804
EndSection
Section "Device"
Identifier "Avance Logic ALG2301"
VendorName "ALI"
BoardName "ALG2301"
Chipset "ali2301"
Videoram 1024
Clocks 42.5 25.0 28.0 31.5 36.0 40.0 45.0 50.0 63.0 65.0 72.0 75.0 79.0=
80.0
EndSection
Section "Screen"
Driver "vga256"
Device "Avance Logic ALG2301"
Monitor "Highscreen MS 1457 LE-II"
Subsection "Display"
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
---[snip]---
This works at least at my machine. Hope that helps.
--
Theofilu Andreas
-------------------------------------------------
Enjoy the science of Linux!
Genie=DFe die Wissenschaft von Linux!
-------------------------------------------------