Very Computer

1. Spea V7 Mirage P-64 (S3-864) and HS MS 1564LE Monitor

I need help to run X on my hardware under linux,

Some technical details for my hardware:

graphic card:

        Spea V7 Mirage P-64
        Processor: S3 Vision864   (64 bit processor)

        Clock: I assume it's programmable but nowhere in the manual
                of my graphic card I can find some technical facts for
                the clock

monitor:

        Highscreen MS 1564 LE  15''
        Bandwith: 75MHz
        Horizontal Sync: 30-64 KHz
        Vertical Sync:   55-90 Hz

I already fetched and installed

        XF86_S3_864.tar.gz.good.linux

from  ftp.cdrom.com. Before I only got "unknown chipset (chipd=0XC0)",
with the new S3 server X runs at least in a 640x480 resolution mode.
But I don't get X run in higher resolutions.

I set

Clocks  "icd2061a"

I'm not sure whether this is correct for my card, isn't it?

Furthermore does anybody know the magic numbers (ModeDB) I need
for /etc/Xconfig?

For any help I would be very grateful,

        Karl Prott

P.S.: If I get running it I will post the results.

--

------------------------------------------------------------------------
email address:                    | Karl Prott

                                  | Fachbereich 17-Mathematik/Informatik
phone: xx-49-5251-602652          | Warburger Str. 100
fax  : xx-49-5251-603853          | D-33098 Paderborn, Germany
------------------------------------------------------------------------

2. LDAP Authentification Howto

3. Metro-X and SPEA V7 Mirage P-64

4. How do you determine Tape Drive Capacity

5. Xconfig Spea V7-Mirage P-64 Help!!!

6. Can I set 57600 for port /dev/cua/a for netra i 535 (sun4) with Solaris 2.5.1 ???

7. Xconfig Spea Mirage V7 P-64 help !!!

8. Visual Network Monitoring Tools??

9. Spea V7 Mirage P-64 PCI

10. Spea V7-Mirage P-64 PROBLEMS!!!!!

11. SPEA v7 Mirage S3 VLB

12. Problems with SPEA V7 Mirage VLB S3-805 card

13. S3 968 Spea Mercury P-64 V: screen is wrapped