Help needed! How to do with Adaptec SCSI2902?

Help needed! How to do with Adaptec SCSI2902?

Post by Mic. » Tue, 18 May 1999 04:00:00



I cannot find any glue of configuring Adaptech SCSI 2902 card for Linux.
Is there any way to let Linux work with this card?

Thanks

Mike

Kernel-2.2.9

------------------  Posted via SearchLinux  ------------------
                  http://www.searchlinux.com

 
 
 

Help needed! How to do with Adaptec SCSI2902?

Post by LHD Administrato » Tue, 18 May 1999 04:00:00



>I cannot find any glue of configuring Adaptech SCSI 2902 card for Linux.
>Is there any way to let Linux work with this card?

It should work just fine, it's just an aic7856 on a cheap board. Are you
using the "aic7xxx" driver?  (If you have gotten that far, what sort of
error messages are you seeing?) You won't be able to boot from it, however.

For more info and to rate this product (or add  your workaround about) this
product, go to the Linux Hardware Database at
<http://lhd.datapower.com/db/dispproduct.cgi?DISP?256> .

LHD Administrator


 
 
 

Help needed! How to do with Adaptec SCSI2902?

Post by Simone Piccard » Thu, 20 May 1999 04:00:00


Mine is working on a RH5.2, but I have no idea about what to do. It just
be recognized on installation and everithing went fine.
Bye
--
Simone Piccardi
Microsoft is NOT the answer. Microsoft is the Question.
The answer is: "NO!"
 
 
 

1. HELP NEEDED: Need DOS emulator for WABI under Solaris

DISCLAIMER:
[Please excuse me if I have posted this to the wrong group. I searched
through the list of USENET group that seemed likely to have people
who know about my question. If I have posted to the wrong group, please
do not flame me; rather, just calmly tell me which group this message
should go to.]

I am writing this for a researcher in our research group. We presently
have several SUN SPARC 10's that are running Solaris 2.0 (SYS V)
from SUN. Included in the OS is WABI, a MS Windows emulator.
One of our researchers would like to use WABI to run Windows and
DOS applications from the SPARC. We have got the Windows part running
perfectly fine (following the installation instructions). However,
we do not seem to have a DOS emulator (and the help page
for DOS Emulators says explictly that it is NOT included with WABI).
Therefore, does anyone know of any DOS emulators that can run under
WABI (either commercial or share/free-ware?
Has anyone out there ever run Windows/MSDOS on a SPARC using WABI?
Are there any severe limitations?

NOTE: I realize that I should read the group for several days to get a feel
of the questions being asked (eg. so I can figure out whether I am in the
correct group), but this problem is very urgent, hence the mass-distribution
of my message to several newsgroups (see my disclaimer at start of message).

If you can help me in any way possible, could you please mail me ASAP

a vitally important problem.

PS: Just for the record, I am NOT the sys-admin at this site.

Thanks in advance!
-
Yours truly,
Jeff Lawrence


Grad Student, Imaging Research Labs, Robarts Research Institute
University Of Western Ontario, P.O. Box 5015, 100 Perth Drive
London, Ont., CANADA, N6A 5K8    (519)663-5777 ext. 4132 (WORK)

2. Uprintf in AIX3.2 on RS6000/560

3. HELP: Connectivity between DOS/DOS and DOS/Linux

4. unbuffered read through a pipe

5. ***>Help with Adaptec 1542CF Setting for Linux+DOS

6. Linux reboots when I try to run cdrecord

7. adaptec, lilo and DOS HELP please !

8. When is XFree86 3.1 being released?

9. Help needed : Adaptec SCSI & CDROM -- FAQ IS NO HELP

10. adaptec,lilo and DOS pleas help !

11. Need help setting up DOS [PLEASE help]

12. Samba w/ DOS box - what does DOS need?

13. Help needed: Adaptec 1740, Kernel Panic