Hardware for a low-power server

Hardware for a low-power server

Post by Noel Llopi » Mon, 05 Jan 2004 23:32:37



I'm putting together a server for a home network that is going to be up
24/7, so I'm trying to keep it consuming as little power and being as quiet
as possible.

From the parts I have laying around, I have the choice of a the following
CPUs (both Slot 1). I looked through Intel's web site but didn't find any
power charts including old processors like these:
- P3 800 (1 fan)
- Celeron 400 (no fans)
- P2 350  (2 fans)

They'll be running on an Abit BH1 motherboard with either 100 or 133 MHz
FSB.

As for the video card, I can go with any of the following:
- GeForce2 GTS 64MB AGP (1 fan)
- TNT2 AGP (no fans)
- Matrox Mystique PCI (no fans)
- Really old Trident 9600 PCI (no fans)

I'm not planning on installing XWindows on this server, so the actual video
card capabilities are not important.

I've already gotten rid of the sound card since I won't be using that
either.

Thanks.

--Noel

 
 
 

Hardware for a low-power server

Post by ray » Tue, 06 Jan 2004 01:35:59



> I'm putting together a server for a home network that is going to be up
> 24/7, so I'm trying to keep it consuming as little power and being as quiet
> as possible.

> From the parts I have laying around, I have the choice of a the following
> CPUs (both Slot 1). I looked through Intel's web site but didn't find any
> power charts including old processors like these:
> - P3 800 (1 fan)
> - Celeron 400 (no fans)
> - P2 350  (2 fans)

> They'll be running on an Abit BH1 motherboard with either 100 or 133 MHz
> FSB.

> As for the video card, I can go with any of the following:
> - GeForce2 GTS 64MB AGP (1 fan)
> - TNT2 AGP (no fans)
> - Matrox Mystique PCI (no fans)
> - Really old Trident 9600 PCI (no fans)

> I'm not planning on installing XWindows on this server, so the actual video
> card capabilities are not important.

> I've already gotten rid of the sound card since I won't be using that
> either.

> Thanks.

> --Noel

If you really want low power use, I suggest you look into mini-itx. There
is a line of mini-itx motherboards (with cpu included) from 500mhz to
1ghz. Start at www.mini-itx.com - I bought a barebones 1ghz system for
about $240 from www.idotpc.com then added memory, hard disk, cd-rw from
local BestBuy and OfficeMax - total under $400 after rebates.

 
 
 

Hardware for a low-power server

Post by Chris Co » Wed, 07 Jan 2004 08:27:59



> I'm putting together a server for a home network that is going to be up
> 24/7, so I'm trying to keep it consuming as little power and being as quiet
> as possible.

> From the parts I have laying around, I have the choice of a the following
> CPUs (both Slot 1). I looked through Intel's web site but didn't find any
> power charts including old processors like these:
> - P3 800 (1 fan)
> - Celeron 400 (no fans)
Celeron 400
> - P2 350  (2 fans)

> They'll be running on an Abit BH1 motherboard with either 100 or 133 MHz
> FSB.

100 FSB.. BH1 did 133??

Quote:

> As for the video card, I can go with any of the following:
> - GeForce2 GTS 64MB AGP (1 fan)
Not for a server.
> - TNT2 AGP (no fans)
Ok.
> - Matrox Mystique PCI (no fans)

Ok (probably better than TNT2).
Quote:> - Really old Trident 9600 PCI (no fans)

Ick... just never my choice for Linux.

Quote:

> I'm not planning on installing XWindows on this server, so the actual video
> card capabilities are not important.

Oh...
 
 
 

Hardware for a low-power server

Post by Dorothy Bradbur » Thu, 08 Jan 2004 03:36:13


Nothing wrong with the fanless Celeron solution, altho the Mini-ITX solution
is cheap also. Mini-ITX need not be low-power in processing terms, whilst
the C3 solutions exist in fanless & fan versions, plus in skt370 re C3 plug-in,
there is also a new mobile P4-M low power Mini-ITX board available now.
It offers onboard PCMCIA, disk on a chip and seems ideal for server apps.

There are also SBC solutions, but they tend to cost more - altho I would say
they are more reliable than some Mini-ITX systems. For power supply I think
the Morex 110W DC-to-DC convertor & laptop-PSU-brick is being redone
as a 120W version shortly, probably for desktop P4 Mini-Itx. For your kind
of power applications the 55W version is probably quite adequate & silent.
--
Dorothy Bradbury
www.stores.ebay.co.uk/panaflofan for fans, books & other items
http://homepage.ntlworld.com/dorothy.bradbury/panaflo.htm (Direct)

 
 
 

1. low-power, low cost hardware for solar powered project

I am researching hardware for a project that has the following primary
requirements:

1. low-power consumption
2. min. 2 serial ports, Ethernet port
3. capable of running a Java 2 JVM (and I mean running - not crawling ;-))
4. capaple of running an embedded DB (Java) system
5. low cost

I had a good search at the archives but most of the suggestions seem to be
'cutting edge' type hardware - which in most cases means high cost . I would
rather go for some established hardware as my computing requirements are not
that high.

The software that the system is going to run is very networking heavy
(XML-RPC ...) but no GUI or Graphics stuff. The system is going to run more
or less headless.

Size of the system is not a big issue. System is going pretty much
stationary.

Since my background is more software heavy I would like to get some feedback
what hardware is being used out there for similar projects.

Thanks in advance,

Leo Gaggl
Adelaide, South Australia

2. How do Domain lookups work?

3. Small low-power motherboard for small linux server

4. Gateway 3-disc cd-rom drive - HELP!

5. Setting up a low-power server

6. Port tracing

7. Low-power, embedded SOC with wireless capabilities?

8. Mounting Ext2fs on MacOS?

9. Low-power device recommendation

10. Low cost, low power small form-factor system?

11. Putting Desktop system HD into low-power mode using APM?

12. Some advise for low-power relays drive

13. Seeking low-power linux-capable board