by WS » Fri, 10 Jan 1997 04:00:00
Hello:
I am trying to install linux red hat 4.0 in a MAD K5-133 with an adaptec
2920 SCSI card, but i have three problems:
1. Linux do not detect the adaptec 2920 it says hosts=0
We have run with the future domain driver 16x0, ok.
2. When linux is copying the files from the CD, the systems hangs.
Is there any incompatibility with this scsi card, or with the AMD k5-133
Thankyou form Mexico.
by Tom Bil » Tue, 14 Jan 1997 04:00:00
At www.redhat.com it talks about detection problems with the 2940 and they
give you the URL for a disk to download to fix those installation problems.
Tom
>Is there any incompatibility with this scsi card, or with the AMD k5-133
>Thankyou form Mexico.
by Roy E. Heath II » Wed, 15 Jan 1997 04:00:00
> At www.redhat.com it talks about detection problems with the 2940 and they
> give you the URL for a disk to download to fix those installation problems.
> Tom
> >Is there any incompatibility with this scsi card, or with the AMD k5-133
Roy-Quote:> >Thankyou form Mexico.
------------------------------------------------------------------------
Roy E. Heath III
1. RH7.0 inst on AST w/ AMD K5-133
Hi Folks;
I'm trying to an install redhat 7.0 on an older ast with the above proc. I'm
getting a crash as soon as /sbin/loader starts from either the cd or the
floppy. It says that there was an invalid EIP. Sounds like deep hardware
problems. Same thing at the same point happens if I try to install Caldera
2.4 .
I've got two drives a 1080MByte primary master & a 6488MByte primary slave.
48MByte memory.
Does anyone have a clue as to what is happening?
Thx
Drew
3. Both Adaptec 2940 and 2920 cards (no 2920!)
4. messages file and no telnet in
5. RedHat over K5-133 and VX main board?
7. Solaris 2.6 for Intel and Adaptec AHA-2920
8. Button2 = : root : f.menu "PROBLEM"
9. Adaptec 2920 under FreeBSD 2.2.8
10. AMD 5x86/133 then parity errors
11. Support for ADAPTEC's SCSI AHA-2920 board
12. adaptec 2920/2920A & RedHat 4.2