combined modem/ethernet card

combined modem/ethernet card

Post by Gerald Hampap » Fri, 24 Oct 1997 04:00:00


is anybody successfully running the 3COM Etherlink III 3C563C
Faxmodem/Ethernet PCMCIA card under linux? are both modes (modem and
network) supported?



1. Problem accessing modem on Linksys combo ethernet modem PCMCIA card

I've encountered a problem on a Winbook laptop running
Mandrake 7.0 and kernel 2.2.14.   Using a Linksys
combination ethernet/modem card, the eithernet card
works but the modem doesn't.   In particular, minicom
can't talk to the modem.  Using a different single modem
card, everything appears to work fine.   However, the Linksys
combo card worked fine for both ethernet and modem when
running Mandrage 6.5 and kernel 2.2.13.   One additional
bit of information: the modem also fails on a system
running RedHat 6.1 with kernel 2.2.12.   Minicom seems
to communicate a bit better with the modem in that some
lights flicker when it is terminated, but it still doesn't
respond to AT with OK.

When the combo card is inserted, it appears to choose
interrupt 2, but changing the interrupt with setserial to
other plausible choices doesn't do any good.


Dept. of Mathematics, Northwestern Univ., Evanston, IL 60208

2. Can't find vt220 termcap...

3. PCMCIA problem: using ethernet/modem card as MODEM ONLY

4. I need help getting RH 5.0 to support FAT32

5. Problem w/ legacy ethernet card & PNP modem card

6. Sync Serial Card

7. OT: Are Cardbus Fast Ethernet cards REALLY FASTER than PCMCIA Fast Ethernet cards

8. rshd: 0826-813 Permission is denied.

9. 3COM ethernet card and NE2000 ethernet card

10. PPP and Ethernet Combined Apps

11. Combining two physical Ethernet ports as part of one logical interface.

12. 3Com/Megahertz 3CXEM556 pcmcia card (multifunction - ethernet/modem) - please help

13. Plans for 3Com 3c56[23] Ethernet+Modem pcmcia card?