Newbie Q: Aopen AX59Pro with AMD K62-300 + G-200 OK ??

Newbie Q: Aopen AX59Pro with AMD K62-300 + G-200 OK ??

Post by Erik D. Harve » Wed, 09 Dec 1998 04:00:00

Hi !

I haven't used Linux before (newbie ) but I have built a very nice system
with the aforementioned components, the mainboard
has the MVP3 100Mhz chipset and has the latest bios.

Any reason this combination shouldn't work with Linux ? I thought it might
be wise to ask before I install ! Much thanks in advance for any comments !

-Erik Dahle Harvey


Newbie Q: Aopen AX59Pro with AMD K62-300 + G-200 OK ??

Post by Barron Koralesk » Wed, 16 Dec 1998 04:00:00

I have the same Motherboard and CPU. Works fine.  I do not think there
is native G200 support in most distributions yet.  You will have to
search dejanews to find out how to configure Xwindows for the G200, but
the rest will be easy.


1. Aopen AX59pro + K6-2 400 + i740 is OK?

I'm going to buy a new computer for running Linux(Redhat).

I decided to buy these components:
CPU     : AMD K6-2 400Mhz
Board   : Aopen AX59pro
Video   : i740 with 8M sgram
HDD     : IBM 10.1G(5400 rpms).

Isn't there any problem? My prospective computer will work right?

Any comment will be appreciated...

| Jinhyok Heo      Undergraduate, School of Civil, Urban & Geosystem Eng. |
|                  Seoul National University, Republic of Korea           |

|         whoami :                     |

2. SATAN April 1 today where is it?

3. need Matrox Millennium G-200 AGP 8mg video driver

4. whats the best modem for linux redhat 6.2 and up?

5. matrox mga g-200

6. MUTEX FIFO seaphores in kernel Device Driver. How?

7. support for Matrox Millenium G-200

8. IDE/ATA66 patches / which? / how to install?

9. Matrox Millenium G-200 Drivers

10. DE201 card I/O ports 300 and 200 conflict Why?

11. Dual PII 300 vs. Dual PPro 200 (512)

12. Why is my 300 MHz G3 only rated as 200 MHz?

13. AOpen AX59Pro, kernel 2.2.12, SCSI resets on Fireport 40