Can burn CDs but not DVDs with xcdroast/Cdrecord-ProDVD

Can burn CDs but not DVDs with xcdroast/Cdrecord-ProDVD

Post by Bernhard Spingl » Wed, 12 Jan 2005 03:00:40



Hi all,

I am running the following kernel:
linux 2.4.21-266-athlon #1 Fri Dec 10 16:28:10 UTC 2004 i686 unknown

I can burn CD's but not DVD's with xcdroast.

Thanks for your help!

Bernhard

I get the following error:

Calling: /usr/lib/xcdroast-0.98/bin/xcdrwrap CDRECORDPRODVD dev=
"0,0,0" gracetime=10 fs=4096k driveropts=burnfree -v -useinfo speed=12
-dao -eject -pad -data "/tmp/track-01.img" ...

scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.25
SCSI buffer size: 64512
Cdrecord-ProDVD-Clone 2.01.01a01 (i686-pc-linux-gnu) Copyright (C)
1995-2004 J?rg Schilling
Unlocked features: ProDVD Clone
Limited  features:
This copy of cdrecord is licensed for:
private/research/educational_non-commercial_use
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.8'.
Driveropts: 'burnfree'
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   :
Vendor_info    : 'HP      '
Identifikation : 'DVD Writer 200j '
Revision       : '1.36'
Device seems to be: Generic mmc2 DVD-ROM.
Current: DVD+R
Profile: DVD+R (current)
Profile: DVD+RW
Profile: DVD-ROM
Profile: CD-RW
Profile: CD-R
Profile: CD-ROM
Using generic SCSI-3/mmc-3 DVD+R driver (mmc_dvdplusr).
Driver flags   : DVD MMC-3 SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1310720 = 1280 KB
FIFO size      : 4194304 = 4096 KB
pregap1: -1
Track 01: data  2096 MB         padsize:   30 KB
Total size:     2096 MB = 1073455 sectors
Current Secsize: 2048
Blocks total: 2295104 Blocks current: 2295104 Blocks remaining:
1221649
Starting to write CD/DVD at speed 0 in real SAO mode for single
session.

Waiting for reader process to fill input buffer ...
input buffer ready.
Starting new track at sector: 0
cdrecord.prodvd: Input/output error. write_g1: scsi sendcmd: no error
CDB:  2A 00 00 00 00 00 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 04 00 00 00 00 0C 00 00 00 00 91 C2 00 00
Sense Key: 0x4 Hardware Error, Segment 0
Sense Code: 0x91 Qual 0xC2 (vendor unique sense code 0x91) [No
matching qualifier] Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 51.076s timeout 100s
cdrecord.prodvd: A write error occured.
cdrecord.prodvd: Please properly read the error message above.

write track data: error after 0 bytes
Writing  time:   56.094s
Average write speed  28.3x.
Fixating...
Fixating time:    0.002s
BURN-Free was not used.
cdrecord.prodvd: fifo had 64 puts and 1 gets.
cdrecord.prodvd: fifo was 0 times empty and 0 times full, min fill was
100%.

Fixating...
Sense Key: 0x2 Not Ready, Segment 0
Trouble flushing the cache
Sense Code: 0x04 Qual 0x07 (logical unit not ready, operation in
progress) Fru 0x0
Fixating time:    0.000s
Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 100s
cdrecord.prodvd: Input/output error. flush cache: scsi sendcmd: no
error
CDB:  35 02 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0C 00 00 00 00 04 07 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x04 Qual 0x07 (logical unit not ready, operation in
progress) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 1000s
cdrecord.prodvd: Cannot fixate disk.
cdrecord.prodvd: Input/output error. start/stop unit: scsi sendcmd: no
error
CDB:  1B 00 00 00 02 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0C 00 00 00 00 04 07 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x04 Qual 0x07 (logical unit not ready, operation in
progress) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 100s
cdrecord.prodvd: Cannot eject media.
cdrecord.prodvd: fifo had 64 puts and 1 gets.
cdrecord.prodvd: fifo was 0 times empty and 0 times full, min fill was
100%.

 
 
 

Can burn CDs but not DVDs with xcdroast/Cdrecord-ProDVD

Post by Henrik Carlqvis » Wed, 12 Jan 2005 04:27:09



> I can burn CD's but not DVD's with xcdroast.

growisofs is command-line only, but it is rather easy to use for burning
DVDs. If you are unable to use also growisofs it is probably a hardware
error.

regards Henrik
--
The address in the header is only to prevent spam. My real address is:
hc2(at)uthyres.com Examples of addresses which go to spammers:


 
 
 

Can burn CDs but not DVDs with xcdroast/Cdrecord-ProDVD

Post by Spamles » Wed, 12 Jan 2005 08:19:27




>> I can burn CD's but not DVD's with xcdroast.

> growisofs is command-line only, but it is rather easy to use for burning
> DVDs. If you are unable to use also growisofs it is probably a hardware
> error.

There are GUI front ends to growisofs ... I just saw on one freshmeat ...
let me check ...

  TkDVD is a GUI for growisofs, which is a part of dvd+rw-tools.
  It allows burning DVD+R/RW and -R/RW discs easily.

  http://freshmeat.net/redir/tkdvd/46963/url_homepage/tkdvd
  (redirects to:
     Location: http://savannah.nongnu.org/projects/tkdvd/
   which has a link to the project's home page:
     http://regis.damongeot.free.fr/tkdvd/)

---

What burner is he using? What kernel?

 
 
 

Can burn CDs but not DVDs with xcdroast/Cdrecord-ProDVD

Post by glen herro » Wed, 12 Jan 2005 14:41:04


may be this will help:

CDR_SECURITY=8:dvd,
clone:sparc-sun-solaris2,
i386-pc-solaris2,
i586-pc-linux,
powerpc-apple
,hppa
,powerpc-ibm-aix,
i386-unknown-freebsd,
i386-unknown-openbsd,
i386-unknown-netbsd,
powerpc-apple-netbsd,
i386-pc-bsdi,
mips-sgi-irix,
i386-pc-sco:1.11::1110000000:::
private/research/educational_non-commercial_use:

1p8anqnRQ3jtiMgniHZLFfWSyfs2L.
m4ab/OAUHU95PYL.SF7W2NAIDkJ/A

i'll let u work out the rest

 
 
 

1. Cdrecord-ProDVD now supports DVD+RW & DVD+R

For all who are interested in testing new software that may still have
problems, I am proud to announce that cdrecord-ProDVD started to include
Support for DVD+RW and DVD+R media. It currently has only been tested in
Ricoh based drives, so I don't know if it will work for e.g. the Sony DRU-500A
and the NEC-1100.

Please note that neither DVD+RW nor DVD+R Media support simulation writes
(what you get with cdrecord -dummy).

If you like to test, get a cdrecord-prodvd-2.01a11 binary from

ftp://ftp.berlios.de/pub/cdrecord/ProDVD/

Please don't forget to read the README in the same directory.

As DVD+RW works similar to a DVD-RAM, you may use it with the kernel level
UDF filesystem support in Solaris.

Usage in this case:

1) Call cdrecord dev=b,t,l -format -v

2) Create a new filesystem on the device (call mkfs_udfs)

3) Mount the device and write to it

4) Unmount the device

5) Call cdrecord dev=b,t,l -fix -v

6) Remove the media or mount it read-only

Note that I did not yet test this case as I am currently running
a Solaris 9 version that does not like Ricoh based DVD drives because
of their ATA standard deviations.

--



URL:  http://www.fokus.fraunhofer.de/usr/schilling ftp://ftp.berlios.de/pub/schily

2. NIS or better ypserv 1.3.6 doesnt't work

3. How do i purchase Cdrecord-ProDVD ?

4. exchange server again

5. cdrecord-prodvd from stdin

6. Linux Swap Partition Question

7. Pioneer A04 with cdrecord-prodvd

8. I tried LINUX :-) :-)

9. cdrecord-ProDVD on LinuxPPC

10. problems with cdrecord-prodvd

11. xcdroast does not recognise CD/DVD drive

12. purchase cdrecord-prodvd, help Joerg Schilling(JS)

13. Need help: Linux/xcdroast/cdrecord noise on burn