Weird CRC Error!

Weird CRC Error!

Post by yon.. » Wed, 15 Mar 2000 04:00:00

I tried to install RedHat 6.1 on a newly bought Dell Dimension XPS
T750r. After doing the routine installation, I can boot the system with
floppy. When I boot from the hard disk(LILO), I encountered a problem of
CRC error. The attached is the message I got when booting. I don't know
which part of the hardware has problem or some configuration goes wrong.
It has bothered me for one week, can anybody help me out of this?



Boot msg:

egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #1 Fri Mar 10 16:05:01
EST 2000
Detected 748289295 Hz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 747.11 BogoMIPS
Memory: 516864k/524224k available (1076k kernel code, 416k reserved,
5524k data, 64k init)
DENTRY hash table entries: 262144 (order: 9, 2097152 bytes)
Buffer-cache hash table entries: 524288 (order: 9, 2097152 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
VFS: Diskquotas version dquot_6.4.0 initialized
CPU: Intel Pentium III (Coppermine) stepping 01
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX

PCI: PCI BIOS revision 2.10 entry at 0xfd993
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 524288 bhash 65536)
Initializing RT netlink socket
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
pty: 256 Unix98 ptys configured
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.9)
Real Time Clock Driver v1.09
RAM disk driver initialized:  16 RAM disks of 4096K size
Uniform Multi-Platform E-IDE driver Revision: 6.20
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: not 100% native mode: will probe irqs later
    ide1: BM-DMA at 0x1c08-0x1c0f, BIOS settings: hdc:pio, hdd:DMA
PDC20262: IDE controller on PCI bus 00 dev 78
PDC20262: not 100% native mode: will probe irqs later
    ide2: BM-DMA at 0x1880-0x1887, BIOS settings: hde:pio, hdf:pio
    ide3: BM-DMA at 0x1888-0x188f, BIOS settings: hdg:pio, hdh:pio
hde: IBM-DPTA-372730, ATA DISK drive
ide1 at 0x170-0x177,0x376 on irq 15
ide2 at 0x1c38-0x1c3f,0x1c2e on irq 3
hde: IBM-DPTA-372730, 26105MB w/1961kB Cache, CHS=53040/16/63
hdc: ATAPI 32X DVD-ROM drive, 512kB Cache
Uniform CDROM driver Revision: 2.56
hdd: ATAPI 32X CD-ROM CD-R/RW drive, 4096kB Cache
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12
raid5: measuring checksumming speed
raid5: MMX detected, trying high-speed MMX checksum routines
   pII_mmx   :  1662.684 MB/sec
   p5_mmx    :  1746.504 MB/sec
   8regs     :  1285.494 MB/sec
   32regs    :   730.758 MB/sec
using fastest function: p5_mmx (1746.504 MB/sec)
scsi : 0 hosts.
scsi : detected total.
md.c: sizeof(mdp_super_t) = 4096
Partition check:
 hde: [PTBL] [3328/255/63] hde1 hde2 < hde5 hde6 hde7 hde8 hde9 >
RAMDISK: Compressed image found at block 0

*crc error<6>autodetecting RAID arrays            *

autorun ...
... autorun DONE.
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 64k freed
Adding Swap: 136512k swap-space (priority -1)

                 Welcome to Red Hat linux
*Checking root filesystem                           *
*   /dev/hde1 is mounted. Cannot continue, aborting.*

Sent via
Before you buy.