hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x84 { DriveStatusError BadCRC )

hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x84 { DriveStatusError BadCRC )

Post by Donald MacQuee » Fri, 26 Jul 2002 10:03:07



i am running rh 7.3 on an athlon 950 with 512 ram and
a maxtor 40 gig drive, and i get this error several times
an hour. i also get 'no 80 pin condutor cable' at boot up
if that means anything.

i swapped cables and replaced the drive with an identical
maxtor -- no change.

i google'd this and got nothing that seemed relevant.

is this something i need to worry about? any idea appreciated.

tia.

donald

 
 
 

hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x84 { DriveStatusError BadCRC )

Post by baskitcais » Fri, 26 Jul 2002 16:56:55



> i am running rh 7.3 on an athlon 950 with 512 ram and
> a maxtor 40 gig drive, and i get this error several times
> an hour. i also get 'no 80 pin condutor cable' at boot up
> if that means anything.

> i swapped cables and replaced the drive with an identical
> maxtor -- no change.

> i google'd this and got nothing that seemed relevant.

> is this something i need to worry about? any idea appreciated.

> tia.

> donald

Donald,

Are you sure the cable is a udma 66/100 cable?
also what are the results of "hdparm /dev/hda" (from root) ?

--
Cheers
Mark
Nil iligitum carborundum

 
 
 

hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x84 { DriveStatusError BadCRC )

Post by Donald MacQuee » Fri, 26 Jul 2002 20:51:46




> > i am running rh 7.3 on an athlon 950 with 512 ram and
> > a maxtor 40 gig drive, and i get this error several times
> > an hour. i also get 'no 80 pin condutor cable' at boot up
> > if that means anything.

> > i swapped cables and replaced the drive with an identical
> > maxtor -- no change.

> > i google'd this and got nothing that seemed relevant.

> > is this something i need to worry about? any idea appreciated.

> > tia.

> > donald

> Donald,

> Are you sure the cable is a udma 66/100 cable?

No

Quote:> also what are the results of "hdparm /dev/hda" (from root) ?

/dev/hda:
 multcount    = 16 (on)
 I/O support  =  1 (32-bit)
 unmaskirq    =  1 (on)
 using_dma    =  1 (on)
 keepsettings =  0 (off)
 nowerr       =  0 (off)
 readonly     =  0 (off)
 readahead    =  8 (on)
 geometry     = 4867/255/63, sectors = 78198750, start = 0
 busstate     =  1 (on)

- Show quoted text -

Quote:

> --
> Cheers
> Mark
> Nil iligitum carborundum

 
 
 

hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x84 { DriveStatusError BadCRC )

Post by baskitcais » Sat, 27 Jul 2002 07:30:48






>> > i am running rh 7.3 on an athlon 950 with 512 ram and
>> > a maxtor 40 gig drive, and i get this error several times
>> > an hour. i also get 'no 80 pin condutor cable' at boot up
>> > if that means anything.

>> > i swapped cables and replaced the drive with an identical
>> > maxtor -- no change.

>> > i google'd this and got nothing that seemed relevant.

>> > is this something i need to worry about? any idea appreciated.

>> > tia.

>> > donald

>> Donald,

>> Are you sure the cable is a udma 66/100 cable?
> No

>> also what are the results of "hdparm /dev/hda" (from root) ?

> /dev/hda:
>  multcount    = 16 (on)
>  I/O support  =  1 (32-bit)
>  unmaskirq    =  1 (on)
>  using_dma    =  1 (on)
>  keepsettings =  0 (off)
>  nowerr       =  0 (off)
>  readonly     =  0 (off)
>  readahead    =  8 (on)
>  geometry     = 4867/255/63, sectors = 78198750, start = 0
>  busstate     =  1 (on)

>> --
>> Cheers
>> Mark
>> Nil iligitum carborundum

looks ok I would suggest you get hold of an 80pin 66/100 ide cable and try
that.

HTH

--
Cheers
Mark
Nil iligitum carborundum