SCSI CD writer: Aiee, killing interrupt handler!

SCSI CD writer: Aiee, killing interrupt handler!

Post by Claus Atzenbec » Fri, 14 Dec 2001 18:45:43



I have

- Mandrake 8.1 (Kernel 2.4.8-34.1mdk with devfs)
- SCSI card
        Vendor: Advanced Micro Devices [AMD]
        Model: 53c974 [PCscsi]
        Kern Modul: AM53C974
        Bus Type: PCI
- SCSI CD writer
        Vendor: TEAC
        Model: CD-R58S
        Device: /dev/scd0
        Bus Type: SCSI

Every time I do "cdrecord -scanbus", Linux freezes after the following
error message:

**********************************************************************
scsibus0:
        0,0,0   0)*
        0,1,0   1)*
        0,2,0   2)*
        0,3,0   3) 'TEAC' 'CD-R58S' '1.0K' Removable CD-ROM
DC390: pTmpSRB (TagQ Error?) (04-0)

Unable to handle kernel NULL pointer dereference at virtual address 00000027
printing eip:
da821037

[... some more stuff ...]

<0>Kernel panic: Aiee, killing interrupt handler!
In interrupt handler - not syncing
**********************************************************************

I guess that this is a hardware problem. What is to do? Please give me some
help! (I'm neither hardware nor kernel guru...)

I should say that my hardware did work on Mandrake 8.0.

Here are some mor information, which could be related to this problem:

(ATTN: IRQ 11 and IRQ 10 do have two devices!)

cat /proc/pci

PCI devices found:
  Bus  0, device   0, function  0:
    Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x]
(rev 68).
      Master Capable.  Latency=16.  
      Prefetchable 32 bit memory at 0xe0000000 [0xe3ffffff].
  Bus  0, device   1, function  0:
    PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x
AGP] (rev 0).
      Master Capable.  No bursts.  Min Gnt=12.
  Bus  0, device   7, function  0:
    ISA bridge: VIA Technologies, Inc. VT82C596 ISA [Mobile South] (rev 18).
  Bus  0, device   7, function  1:
    IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 6).
      Master Capable.  Latency=64.  
      I/O at 0xd000 [0xd00f].
  Bus  0, device   7, function  2:
    USB Controller: VIA Technologies, Inc. UHCI USB (rev 8).
      IRQ 10.
      Master Capable.  Latency=64.  
      I/O at 0xd400 [0xd41f].
  Bus  0, device   7, function  3:
    Host bridge: VIA Technologies, Inc. VT82C596 Power Management (rev 32).
  Bus  0, device  14, function  0:
    Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139 (rev 16).
      IRQ 11.
      Master Capable.  Latency=64.  Min Gnt=32.Max Lat=64.
      I/O at 0xd800 [0xd8ff].
      Non-prefetchable 32 bit memory at 0xeb000000 [0xeb0000ff].
  Bus  0, device  16, function  0:
    SCSI storage controller: Advanced Micro Devices [AMD] 53c974 [PCscsi]
(rev 16).
      IRQ 5.
      Master Capable.  Latency=70.  Min Gnt=4.Max Lat=40.
      I/O at 0xdc00 [0xdc7f].
  Bus  0, device  18, function  0:
    Network controller: AVM Audiovisuelles MKTG & Computer System GmbH A1
ISDN [Fritz] (rev 2).
      IRQ 9.
      Non-prefetchable 32 bit memory at 0xeb001000 [0xeb00101f].
      I/O at 0xe000 [0xe01f].
  Bus  0, device  20, function  0:
    Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 8).
      IRQ 10.
      Master Capable.  Latency=64.  Min Gnt=12.Max Lat=128.
      I/O at 0xe400 [0xe43f].
  Bus  1, device   0, function  0:
    VGA compatible controller: ATI Technologies Inc Rage 128 RF (rev 0).
      IRQ 11.
      Master Capable.  Latency=64.  Min Gnt=8.
      Prefetchable 32 bit memory at 0xe4000000 [0xe7ffffff].
      I/O at 0xc000 [0xc0ff].
      Non-prefetchable 32 bit memory at 0xe9000000 [0xe9003fff].

cat /proc/scsi/scsi

Attached devices:
Host: scsi0 Channel: 00 Id: 03 Lun: 00
  Vendor: TEAC     Model: CD-R58S          Rev: 1.0K
  Type:   CD-ROM                           ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 04 Lun: 00
  Vendor: QUANTUM  Model: VIKING 4.5 SCA   Rev: 880R
  Type:   Direct-Access                    ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 06 Lun: 00
  Vendor: IOMEGA   Model: ZIP 100          Rev: D.13
  Type:   Direct-Access                    ANSI SCSI revision: 02

cat /etc/modules.conf

pre-install pcmcia_core CARDMGR_OPTS=-f /etc/rc.d/init.d/pcmcia start
alias usb-interface usb-uhci
alias sound-slot-0 es1371
options hisax type=27 id=HiSax protocol=2
probeall scsi_hostadapter tmscsim
alias eth0 8139too
alias ippp0 hisax
alias scsi_hostadapter tmscsim

 
 
 

1. aiee, killing interrupt handler

Hi there

I've been getting this error when I try installing Slackware8.0.

I'm using the bare.i-bootdisk and the color.gz-rootdisk

code: 89 37 83 c7 04 89 d0 25 ff ff 00 00 89 07 83 c7 04 01 d6 29
aiee, killing interrupt handler
kernel panic: attempted to kill the idle task!
in swapper task - not syncing

This is an AT&T Globalyst 730, class 3358:

Dual Intel Pentium 133MHz (HC only uses one CPU)
AUGUSTA Motherboard with VLSI 590 Chip Set
256KB, PB-SRAM L2 Cache
24MB RAM
Integrated S3 Vision968, 4MB VRAM, True Color (32-bit), 1024 by 768,
100Hz Refresh Frequency
Integrated 16 bit stereo (Ensoniq Sound Scape 688)
Integrated AMD PCSCSI Fast SCSI-2 controller

I've tried disabling SCSI, COM and LPT in bios, but it still won't work.
Can you please help me out here?

This very same computer has been running RH6.2 for a period of time, so it
should be enough to run Linux.

Marius

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in

More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

2. Warning for 2.2.x_R users about post-2.2.7 X ports

3. aiee, killed interrupt handler - kernel panic

4. HELP! gdbm.lib problem

5. SMP aic7xxx 2.4.3 boot panic: Aiee, killing interrupt handler

6. DirecPC and Linux?

7. Kernel panic: Aiee, killing interrupt handler!

8. NIS Netgroup map doesn't work

9. Kernel panic:Aiee killing interrupt handler

10. 2.4.5 Kernel panic: Aiee, killing interrupt handler!

11. Aiee, killing interrupt handler

12. RH7.1 Install -->Kernel panic: Aiee, killing interrupt handler!

13. Kernel panic, "Aiee, killing interrupt handler!"