Adaptec AIC-7870W (AHA-294x) Trouble

Adaptec AIC-7870W (AHA-294x) Trouble

Post by Brad Garc » Tue, 12 Dec 1995 04:00:00



Ok, I've tried a number of things now.

I'm trying to install RedHat 2.1, and I'm using the boot0027.img for
a bootdisk, replacing the included kernel with...
  The 1.2.13 kernel with the 2940 patch applied.
  The straight 1.3.35 kernel.
And I've also tried the boot image for RedHat called 2940.img.

Nothing works.  But the hardware works fine under DOS.
I'm using an Intel motherboard with the AIC-7870W built-in (INT3180).

Here's what I'm getting on bootup (using 2940.img):
(Sorry, it won't let me scroll back up to see more)

ANY help would be appreciated!

---------------------------------------------------------

ettings.
Unable to read SEEPROM
aic7870: extended translation disabled
aic7xxx : Enabling wide channel of 7870-Wide
AIC7870-WIDE (PCI-bus):
    irq 11
    bus release time 7 bclks
    data fifo threshold 100%
    SCSI CHANNEL A:
        scsi id 7
        scsi selection timeout 256 ms
        scsi bus reset at power-on enabled
aic7xxx: Downloading sequencer code..done.
NeedSdtr = 0xffff, 0xffff
NeedWdtr = 0xfffe, 0xfffe
Resetting the SCSI bus...
aic7xxx_isr: brkadrint (0xff)
  Illegal Host Access
  Illegal Sequencer Address referrenced
  Illegal Opcode in sequencer program
  Sequencer Ram Parity Error
Kernel panic: aic7xxx_isr: brkadrint, error = 0xff, seqaddr = 0x50a0

In swapper task - not syncing

----------------------------------------------------------

--
 Brad M. Garcia                                          ____/  _ _ /  /   /
"Well, there's more news, but who cares."               /      /_/ /  /   /
     - Jay Pochapin, WRRK Pittsburgh newsman 12/1/95  _____/ _/  _/ _____/

 
 
 

1. AHA-294X/AIC-78XX PCI SCSI Controller

Dear all:

        I'm sorry first if this is not the right place to locate the queston.
My question is "does the current version of Linux support "Adaptec
AHA-294X/AIC-78XX PCI SCSI Controller"?
        I checked the related document and found it only supports AHA-284X
and could not find anything related to AHA-294X and could not use the boot
disk to recognize my HD controller.

        Please tell me the answer when you have time. Thanks a lot in
advance.

Best regards,

2. xmkmf probs and lost xpm.h

3. 16 bits SCSI and Adaptec AHA-294X

4. Controlling CD Drive Bay Door

5. Adaptec AHA 294x SCSI controller with RedHat 4.1

6. diald AND dialmon

7. SCSI problems with recent kernel AHA-294X

8. Getting NAT, IPFW, PPOE configured with RELEASE-4.1

9. 3Com 3c900 and AHA-294X SCSI interrupt conflict

10. AHA-294x and 3C59x

11. problem with the Adaptec AHA-2940UW ProproProblem with the Adaptec AHA-2940UW Pro

12. Adaptec AHA-2940U2W (AIC-7890)

13. Looking for Adaptec AIC-7890 (aka AHA-2940U2W) driver