CD burning errors

CD burning errors

Post by M?ns Rullg? » Sun, 09 Feb 2003 23:52:52



While burning an audio CD, I got the following output.  What is the
error all about?

TIA for any help with insights into this.

$ cdrecord -v -dao driveropts=burnfree -audio *.wav
Cdrecord 2.0 (--) Copyright (C) 1995-2002 J?rg Schilling
TOC Type: 0 = CD-DA
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.24
Using libscg version 'schily-0.7'
Driveropts: 'burnfree'
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 1
Vendor_info    : 'SAMSUNG '
Identifikation : 'CDRW/DVD SM-332B'
Revision       : 'T404'
Device seems to be: Generic mmc2 DVD-ROM.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags   : MMC-2 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96R RAW/R16 RAW/R96R
Drive buf size : 5539840 = 5410 KB
FIFO size      : 4194304 = 4096 KB
Track 01: audio   23 MB (02:19.36) no preemp    
Track 02: audio   22 MB (02:12.04) no preemp    
Track 03: audio   24 MB (02:25.22) no preemp    
Track 04: audio   20 MB (02:03.33) no preemp    
Track 05: audio   20 MB (02:04.20) no preemp    
Track 06: audio   22 MB (02:10.80) no preemp    
Track 07: audio   22 MB (02:15.53) no preemp    
Track 08: audio   22 MB (02:13.33) no preemp    
Track 09: audio   20 MB (02:00.20) no preemp    
Track 10: audio   25 MB (02:32.17) no preemp    
Track 11: audio   23 MB (02:17.20) no preemp    
Track 12: audio   19 MB (01:57.46) no preemp    
Track 13: audio   18 MB (01:51.53) no preemp    
Track 14: audio   23 MB (02:18.49) no preemp    
Track 15: audio   24 MB (02:24.80) no preemp    
Track 16: audio   18 MB (01:48.46) no preemp    
Track 17: audio   22 MB (02:10.86) no preemp    
Track 18: audio   20 MB (02:02.44) no preemp    
Track 19: audio   21 MB (02:05.82) no preemp    
Track 20: audio   30 MB (03:00.86) no preemp    
Total size:      446 MB (44:14.16) = 199062 sectors
Lout start:      446 MB (44:16/12) = 199062 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 5
  Is not unrestricted
  Is not erasable
  Disk sub type: Medium Type B, low Beta category (B-) (4)
  ATIP start of lead in:  -11933 (97:22/67)
  ATIP start of lead out: 359849 (79:59/74)
Disk type:    Short strategy type (Phthalocyanine or similar)
Manuf. index: 43
Manufacturer: Acer Media Technology, Inc.
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 160787
Starting to write CD/DVD at speed 32 in real SAO mode for single session.
Last chance to quit, starting real write    0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is ON.
Performing OPC...
Sending CUE sheet...
cdrecord: WARNING: Drive returns wrong startsec (0) using -150
Writing pregap for track 1 at -150
Starting new track at sector: 0
Track 01:   23 of   23 MB written (fifo  98%) [buf  99%]  16.7x.
Track 01: Total bytes read/written: 24583104/24583104 (10452 sectors).
Starting new track at sector: 10452
Track 02:   22 of   22 MB written (fifo  98%) [buf  99%]  16.2x.
Track 02: Total bytes read/written: 23291856/23291856 (9903 sectors).
Starting new track at sector: 20355
Track 03:   24 of   24 MB written (fifo 100%) [buf  99%]  16.2x.
Track 03: Total bytes read/written: 25617984/25617984 (10892 sectors).
Starting new track at sector: 31247
Track 04:   20 of   20 MB written (fifo 100%) [buf  99%]  20.3x.
Track 04: Total bytes read/written: 21756000/21756000 (9250 sectors).
Starting new track at sector: 40497
Track 05:   20 of   20 MB written (fifo 100%) [buf  99%]  20.3x.
Track 05: Total bytes read/written: 21908880/21908880 (9315 sectors).
Starting new track at sector: 49812
Track 06:   22 of   22 MB written (fifo  98%) [buf  99%]  20.3x.
Track 06: Total bytes read/written: 23073120/23073120 (9810 sectors).
Starting new track at sector: 59622
Track 07:   22 of   22 MB written (fifo 100%) [buf  99%]  20.2x.
Track 07: Total bytes read/written: 23908080/23908080 (10165 sectors).
Starting new track at sector: 69787
Track 08:   22 of   22 MB written (fifo 100%) [buf  99%]  20.2x.
Track 08: Total bytes read/written: 23520000/23520000 (10000 sectors).
Starting new track at sector: 79787
Track 09:    2 of   20 MB written (fifo 100%) [buf  99%]  20.5x.cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB:  2A 00 00 01 3C A0 00 00 1B 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 0C 04 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x0C Qual 0x04 (compression check miscompare error) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.004s timeout 200s

write track data: error after 2984688 bytes
Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00
Writing  time:   86.786s
Average write speed  34.4x.
Min drive buffer fill was 99%
Fixating...
Fixating time:    0.002s
BURN-Free was never needed.
cdrecord: fifo had 3070 puts and 3007 gets.
cdrecord: fifo was 0 times empty and 1876 times full, min fill was 95%.

--
M?ns Rullg?rd

 
 
 

CD burning errors

Post by Clifford Kit » Mon, 10 Feb 2003 22:04:11



> While burning an audio CD, I got the following output.  What is the
> error all about?
> Sense Key: 0x3 Medium Error, Segment 0

I've seen this one here.  I took it to mean that the CD was defective.
On the second try with another CD there was no error.

--

PPP-Q&A links, downloads:    http://users3.ev1.net/~ckite/public_html/
/* Speak softly and carry a +6 two-handed sword. */

 
 
 

CD burning errors

Post by M?ns Rullg? » Tue, 11 Feb 2003 19:38:48



> > While burning an audio CD, I got the following output.  What is the
> > error all about?

> > Sense Key: 0x3 Medium Error, Segment 0

> I've seen this one here.  I took it to mean that the CD was defective.
> On the second try with another CD there was no error.

OK.  I had never seen this one before, but I have had some trouble
with stability when burning.  Sometimes some scsi command would time
out halfway through the burning.  A few times the machine has locked
up totally.  I replaced some cables and hope that it helps.

--
M?ns Rullg?rd

 
 
 

1. Please help -- error in burning or reading burned CD

Hi there:

  I have a new 36x12x48 CD-RW and I am still using FreeBSD 4.6. I haven't
  upgraded to 5.x yet because I have collected about 80 Gigabytes of stuff
  that I want to burn to CDs first. I have a P4 machine, 2 GHz, and 1G of
  memory. And here is an apparent problem.

  (1) When the burning is about 14%, there seems to be brief halt in the
  burning process (because burncd doesn't increase in the number of
  kilobytes burned) and then there is a noise of rapid spinning of the
  CD-RW, and then the rest of the burning seems okay.

  (2) After I burned a CD, there is an error in reading the CD from the
  CD-RW, and it says "error READ_BIG: ... MEDIUM ... 0x11 ..." or something
  similar. I am unable to use "diff" command to compare the original
  directory to those I burned onto the CD. But when I randomly check files
  on the CD from my W2K-DVD drive, I am unable to find any apparent error
  (yet), and I can read all the files I randomly selected to check. This
  happens to every disk I burned.

  Could someone please tell me what is going on, or have you experienced
  similar problem?

  Thank you very much.

vector

2. Newsservers and networking

3. CD burning issues under redhat with all burning applications

4. problem with Wget

5. error burning cd-r on philips3610 linux

6. Acer, Linux and Yamaha OPL3-SAx PnP

7. Burning data/audio CD Error Audio

8. netscape plugin wanted ! (linux version i guess, don't know how to express)

9. Errors in burned CDs

10. Unable to burn CD due to crc error

11. cd burning/reading error

12. CD burning - timeouts, SCSI errors

13. IO Errors on CDs burned /w cdwrite Win95 reads OK