Sound Blaster 16PCI - Device or resource busy

Sound Blaster 16PCI - Device or resource busy

Post by V.T. Jone » Thu, 20 Sep 2001 20:33:54



Running Debian potato, 2.2_3 (latest stable release)

Trying to get a recently purchased Sound Blaster 16PCI (CT5880-DCQ chip) to
work.

insmod es1371 reports as follows:

Using /lib/modules/2.2.19pre17/misc/es1371.o
/lib/modules/2.2.19pre17/misc/es1371.o: init_module: Device or resource busy
Hint: this error can be caused by incorrect module parameters, including
invalid IO or IRQ parameters.

Card works under another OS using the driver provided with the card.

Here, at any rate are my "ioports":

    0000-001f : dma1
    0020-003f : pic1
    0040-005f : timer
    0060-006f : keyboard
    0070-007f : rtc
    0080-008f : dma page reg
    00a0-00bf : pic2
    00c0-00df : dma2
    00f0-00ff : fpu
    0170-0177 : ide1
    01f0-01f7 : ide0
    0376-0376 : ide1
    03c0-03df : vga+
    03f0-03f5 : floppy
    03f6-03f6 : ide0
    03f7-03f7 : floppy DIR
    03f8-03ff : serial(set)
    fcf0-fcf7 : ide0
    fcf8-fcff : ide1

my "interrupts"

               CPU0
      0:     401653          XT-PIC  timer
      1:       3782          XT-PIC  keyboard
      2:          0          XT-PIC  cascade
      6:         56          XT-PIC  floppy
      8:          1          XT-PIC  rtc
     12:       5635          XT-PIC  PS/2 Mouse
     13:          0          XT-PIC  fpu
     14:         13          XT-PIC  ide0
     15:      47989          XT-PIC  ide1
    NMI:          0

and the output from lspci -vv

00:00.0 Host bridge: Silicon Integrated Systems [SiS] 5597 [SiS5582] (rev
10)
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
 Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-
 Latency: 32 set

00:01.0 ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513 (rev 01)
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
 Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
 Latency: 0 set

00:01.1 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0)
(prog-if 8a [Master SecP PriP])
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
 Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
 Latency: 64 set
 Interrupt: pin A routed to IRQ 0
 Region 0: I/O ports at 01f0
 Region 1: I/O ports at 03f4
 Region 2: I/O ports at 0170
 Region 3: I/O ports at 0374
 Region 4: I/O ports at fcf0

00:01.2 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 10)
(prog-if 10 [OHCI])
 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
 Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
 Interrupt: pin A routed to IRQ 9
 Region 0: Memory at feddf000 (32-bit, non-prefetchable)

00:0b.0 Ethernet controller: Bridgecom, Inc: Unknown device 0985 (rev 11)
 Subsystem: Bridgecom, Inc: Unknown device 0574
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
 Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
 Latency: 255 min, 255 max, 64 set, cache line size 04
 Interrupt: pin A routed to IRQ 0
 Region 0: I/O ports at f800
 Region 1: Memory at fedffc00 (32-bit, non-prefetchable)
 Capabilities: [c0] Power Management version 2
  Flags: PMEClk- AuxPwr- DSI- D1+ D2+ PME+
  Status: D3 PME-Enable- DSel=0 DScale=0 PME+

00:0c.0 Multimedia audio controller: Ensoniq: Unknown device 5880 (rev 02)
 Subsystem: Ensoniq: Unknown device 2000
 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
 Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
 Interrupt: pin A routed to IRQ 0
 Region 0: I/O ports at f4c0
 Capabilities: [dc] Power Management version 1
  Flags: PMEClk- AuxPwr- DSI+ D1- D2+ PME-
  Status: D3 PME-Enable- DSel=0 DScale=0 PME-

00:13.0 VGA compatible controller: Silicon Integrated Systems [SiS]
5597/5598 VGA (rev 68) (prog-if 00 [VGA])
 Subsystem: Silicon Integrated Systems [SiS]: Unknown device 0200
 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
 Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
 Region 0: Memory at fe800000 (32-bit, prefetchable)
 Region 1: Memory at fede0000 (32-bit, non-prefetchable)
 Region 2: I/O ports at fc00

Any help appreciated.

 
 
 

Sound Blaster 16PCI - Device or resource busy

Post by Dances With Cro » Thu, 20 Sep 2001 23:15:19


On Wed, 19 Sep 2001 11:33:54 GMT, V.T. Jones staggered into the Black
Sun and said:
Quote:>Trying to get a recently purchased Sound Blaster 16PCI (CT5880-DCQ chip) to
>work.
[snip]
>00:0c.0 Multimedia audio controller: Ensoniq: Unknown device 5880 (rev
>02) Subsystem: Ensoniq: Unknown device 2000
> Interrupt: pin A routed to IRQ 0

                             ^^^^^
[snip]

Go into the BIOS Setup screen and set "PnP OS" to "NO".  Things that
never worked before in Linux will magically start working.

--
Matt G|There is no Darkness in Eternity/But only Light too dim for us to see
Brainbench MVP for Linux Admin /     That which does not kill us
http://www.brainbench.com     /      makes us stranger.
-----------------------------/       --Trevor Goodchild, "AEon Flux"

 
 
 

Sound Blaster 16PCI - Device or resource busy

Post by V.T. Jone » Fri, 21 Sep 2001 11:49:59


That _was_ magic.  I'm glad I was there when it happened.

SB 16 now making sounds.

Thanks a mil,

Toney



Quote:> On Wed, 19 Sep 2001 11:33:54 GMT, V.T. Jones staggered into the Black
> Sun and said:
> >Trying to get a recently purchased Sound Blaster 16PCI (CT5880-DCQ chip)
to
> >work.
> [snip]
> >00:0c.0 Multimedia audio controller: Ensoniq: Unknown device 5880 (rev
> >02) Subsystem: Ensoniq: Unknown device 2000
> > Interrupt: pin A routed to IRQ 0
>                              ^^^^^
> [snip]

> Go into the BIOS Setup screen and set "PnP OS" to "NO".  Things that
> never worked before in Linux will magically start working.

> --
> Matt G|There is no Darkness in Eternity/But only Light too dim for us to
see
> Brainbench MVP for Linux Admin /     That which does not kill us
> http://www.brainbench.com     /      makes us stranger.
> -----------------------------/       --Trevor Goodchild, "AEon Flux"

 
 
 

1. Sound: Device or resource busy

I'm having problems getting my SB32 to work with Linux (2.1.90). I've
checked and tried isapnp to no avail. insmodding sb.o keeps giving me:


./sb.o: init_module: Device or resource busy

And I've tried several io ports, irqs and dmas

Anyone knows what might be the problem?

--
Thomas

2. Segmentation fault,....

3. sound device or resource busy

4. expanding ~'s in a directory name.

5. sound card problem: device or resource busy msg

6. NFS Installation

7. sound: Device or resource busy

8. 1.3.8: PPP is working again!

9. Sound: Device or resource busy

10. Sound device or resource busy

11. Help on Sound Card GUS Setup -- Device or resource busy

12. Sound card error: Device or resource busy!