by David Joer » Fri, 10 Nov 2000 04:00:00
I have problems with my Yamaha CD-RW 8/8/24 (ATAPI). Every two seconds,
RedHat writes a message to /var/log/messages that the drive is busy,
even if there's no CD inside and it's not mounted. The CD-RW is
connected to the onboard ATA/66 Secondary Port on an A7V motherboard.
Has anyone similar problems?
Thanks
David
--
David Joerg, Moeoeslimatt 10, CH-3037 Herrenschwanden, Switzerland
1. SB Live on Asus A7V , Red Hat 7.0 error "device or resource busy"
Hello
I have SB Live on Asus A7V (VIA KT-133 chipset ) motherboard.
Red Hat 7.0 displays error "device or resource busy" every time I try to
load emu10k1 module.
I have found following answer in homepage of Creative Labs:
But I haven't found any `pci=reverse' option in lilo.conf or somewhere
else.
I don't know how to change that option.
Could you give me some advice, please ?
thanx
Maris
2. Assigning a variable to the piped output?
3. Hooking up PC's as terminals--HOWTO?
4. SuSe 7.0 and Asus A7V promise ATA-100
6. RH 7.0 & ATA100 on Asus A7V
8. SB Live on Asus A7V , Red Hat 7.0 error "device or resource busy"
9. RedHat on ASUS A7V w/ Duron
10. cdrecord and strange DAO problem with Yamaha CRW-F1E
11. asus a7v, redhat 8, promise ata100