Something broke in cciss driver from RedHat 7.1 to 7.2

Something broke in cciss driver from RedHat 7.1 to 7.2

Post by Luis A. Roj » Fri, 22 Feb 2002 23:33:18



The exact same system (Compaq Proliant DL380 G2 w/ Smart Array 5300)
that worked fine with 7.1 does not work with RedHat Linux 7.2. The
cciss driver for tne smart array controller throws errors.
Any help on this?
 
 
 

1. Help: Upgrade from Redhat 7.1 to Redhat 7.2 results internet problem

I have an Pentium Pro 200 System and running RedHat 7.1 as my
firewall/router with no
problem. But I got big problem after upgarde to RedHat 7.2.
The problem is: My internet (DSL connection) will be dead after this
firewall box (RH7.2) running couple hours, i am not sure is it in sleeping
mode or not? if so, then how can I solve it? and I check /var/log/messages,
it shows "ip.conntrack: table full, dropping packet". What's that mean? is
it cause the problem?

Thanks

2. RH rpmbuild tutorial??

3. RedHat 7.1 upgrade broke tulip driver for Linksys

4. Good 2D video card for Linux?

5. HPFS module Redhat 7.1 & 7.2

6. Redhat5.0 Homemade CDROM not recognized

7. Boot problem with RedHat 7.1, 7.2

8. Porting LINUX backwards to TAKING OVER THE WORLD!

9. problem upgrading from Redhat 7.1 to 7.2

10. Problem with RedHat 7.1 & 7.2 X setup on Dell Inspiron 8000+Geforce2 Go+ 1600x1200

11. RedHat 7.1 and 7.2 can't read partition table

12. Can Linux (redhat 7.1, 7.2..) read NTFS partitions?

13. Scsi driver timeout on rh 7.1 & 7.2