kernel - 2.0.35...
My Linux Server with 3c905B TX
Olny run in 10 baseT mode ..
Why .....?
M$ NT can run 100 baseTX .. Linux can't ?
How to run 100 baseTX ?
by Jog Nan » Thu, 03 Sep 1998 04:00:00
My Linux Server with 3c905B TX
Olny run in 10 baseT mode ..
Why .....?
M$ NT can run 100 baseTX .. Linux can't ?
How to run 100 baseTX ?
by Mihai IACO » Thu, 03 Sep 1998 04:00:00
> My Linux Server with 3c905B TX
> Olny run in 10 baseT mode ..
> Why .....?
> M$ NT can run 100 baseTX .. Linux can't ?
> How to run 100 baseTX ?
1. 3Com 3C905B-TX runs at 10M instead of 100M
Hi,
I know, this problem is not new, but I would like to ask for some experience
with it, so I maybe don't have to install a new kernel on a Software
bootable RAID1......
I got a 3COM 3C905B-TX network adapter. It works only at 10M. Now this is
known to be a driver problem, but (stupid as I am) when I built my RAID
kernel I compiled the driver into the Kernel instead of having it as a
module. Now, to my knowledge, setting any options in modules.conf doesn't
help (options 3C59x options=12).
The correct solution (I think) would be to compile a new kernel. But I am a
little reluctant to do this as long as I am not sure whether this will help.
So please, encourage me... Would it help to test the option line by typing
this line at the boot prompt?
I am using SuSE 6.0/Kernel 2.0.36.
Thanks for help
Cheers,
Till
3. 3COM Fast Etherlink XL 10/100Base-TX (3c905B-TX)
5. 3C905B-TX and 3C980-TX -any known problems?
6. Stop Usenet Censorship and Totalitarianism 1554521604
8. Protection on /var/spool/locks dir on Solaris2.3
9. Difficulty running 100BT @ Full Duplex with 3c905B-TX
10. Can't configure 3C905B-TX NIC
11. Can't get 3C905b-TX device recognized..
12. need to change/reset the IRQ on a 3com PCI 3C905B-TX
13. 3com 3c59x Vortex (3C905B-TX) Problems