Very Computer

by **Richard Ber** » Fri, 24 Mar 2000 04:00:00

I am having problems burning cd's with X-cd-roast.

Here is my burning setup.
Plextor 4/12 SCSI writer
Plextor UltraPlex
Seagate Cheetah
Ataptec 2940 U2W

When I am burning a cd image off the drive (both audio *.cda and data)
it will burn up to about 96% and give me an error:

scsi sendcmd:retryable error
status: 0x2 (check condition)
warning: some drives don't like fixation in dummy mode

(this is using simulation burn, but happens in regular burn as well).

I was getting the same error using a Diamond Fireport SCSI card as well.

This is using the latest version of X-CD-Roast 96e. Does anyone have
any suggestions on how I can stop burning coasters?

by **Sandy Dunlo** » Sat, 25 Mar 2000 04:00:00

: I am having problems burning cd's with X-cd-roast.
:
: Here is my burning setup.
: Plextor 4/12 SCSI writer
: Plextor UltraPlex
: Seagate Cheetah
: Ataptec 2940 U2W
:
: When I am burning a cd image off the drive (both audio *.cda and data)
: it will burn up to about 96% and give me an error:
:
: scsi sendcmd:retryable error
: status: 0x2 (check condition)
: warning: some drives don't like fixation in dummy mode
:
: (this is using simulation burn, but happens in regular burn as well).
:
: I was getting the same error using a Diamond Fireport SCSI card as
well.
:
: This is using the latest version of X-CD-Roast 96e. Does anyone have
: any suggestions on how I can stop burning coasters?

tell us all what program is really doing the burning. x-CD-Roast is only
a gui front-end for console CD Burning software. AFAIK you should never
get errors relating to "dummy mode" when you not doing a simulation
burn. I've got XCDRoast configured to use cdrecord to do the burning and
I've never seen that problem (Adaptec 2904/yamaha drive). Perhaps if we
know what software you're using someone will be able to help.

--

-=sandy dunlop=-
http://jaavaaguru.cjb.net
"we came, we saw, we kicked its ass"

Very Computer

X-Cd-Roast

X-Cd-Roast

X-Cd-Roast