I just noticed somthing strange about my serial ports. When I use them in
minicom - I can not set the speed above 9600.
Output from setserial:
/dev/ttyS0 at 0x03f8 (irq = 4) is a 16450
/dev/ttyS1 at 0x02f8 (irq = 3) is a 16550A (spd_vhi)
/dev/ttyS2 at 0x03e8 (irq = 5) is a 16550A (spd_vhi)
/dev/ttyS3 at 0x02e8 (irq = 12) is a 16550A (spd_vhi)
Or any body know where I can get help?
>I see that setserial supports 16550 uart chips. I just plugged in two
>cards to be used with
>ISDN modems. How can I take full advantage of these cards - they should be
>able to go as high
>as 460.8 kbs. When I plug them in - the system just sees them as 16550.