I2c with Hardware sensors and BT878/BT848 card

I2c with Hardware sensors and BT878/BT848 card

Post by John Westerdal » Sun, 15 Apr 2001 11:46:48



Hello All,

Is there a conflict that arises when I rm LM_Sensors
and BT878/BT848 at the same time?  Seems a trick to get
them to /proc/bus/i2c-0, i2c-1, i2c-2.  Have yet to
see them all on at the same time.

Would this require entries in Modules.conf to steer or
preload the tvmixer ( I think thats one I2c device),
or the lm78?

RHL 7.1beta, PIII on WS440BX Intel Board, 600E, 192 MB,

Thanks!  JDW

--
#    Humans wont give up a freedom, once savored       #
# Export hope, eschew obfuscation, Build on Everything #

 
 
 

1. bt848/bt878 video capture drivers

Has work on the bt848/bt878 driver ceased?

The reason I ask is the bt848 has now been replaced by the bt878 on new
Hauppauge WinTV cards. The driver in 'current' has SOME support for the
bt878, however the composite video input feature doesn't work.

And the BT848 Driver Project web-page is no longer accessible at
freebsd.org.

Any information would be appreciated.

Randal Williams

2. The REAL Road Ahead

3. (1/3) i2c-isa, via686a and w8378x series sensors support for 2.5.58

4. GIMP CMYK Developer - Willing to Pay

5. i2c-isa and w83871d sensors support

6. "Make buildworld" keeps failing on 3.3R and 4R

7. 2.5.32 blacklist IBM Thinkpads from i2c/sensors

8. Where to get DOOM.WAD?

9. (3/3) i2c-isa, via686a and w8378x series sensors support for 2.5.58

10. (2/3) i2c-isa, via686a and w8378x series sensors support for 2.5.58

11. 2.4.20-pre5 DMI blacklist IBM Thinkpad in i2c/sensors

12. 2.5.31 blacklist IMB Laptops from I2C-Sensors

13. I2C/Sensors 2.5.70