Very Computer

1. PRINTING POSTSCRIPT TO NON-POSTSCRIPT PRINTER - help...

hi everyone

i've been trying to get my printer(s) set up on my system and i am able
to print plain ascii onto both my epson (really old nasty thing that it
is) and my deskjet.. now, it would be much nicer (and less costly) if i
could print postscript to these non-postscipt printers so i found out
about ghostscript.  (i have actually got ghoscript 2.6.2 on my system
and read up on it.)

i found a very 'simple' (nothing is simply really is it? :-) ) pipeline
that was to print ps on a non-ps printer - ok me thinks so i try it out
using a ps doucment i found, and executed:
 gs -dSAFER -dNOPAUSE -sDEVICE=epson -sOutputFile= | lpr file.ps

i removed the 'filter' (the 'if') entry from /etc/printcap just to be
sure that what was going to be printed was the output of this file

however the printer output the 'lovely' ps as the ascii-ps code; ie
beginning the file with
 %!PS-Adobe-2.0
 ...
 %%EOF

(i actually viewed the ps file using ghostview and it is valid
postscript)

i also tried out a ps-printcap i found tat did the 'print ps on non-ps
printer' trick - here is the lsm entry
 Title:  ps-printcap
 Version: 1
 Entered-date: 22NOV95
 Description: printcap and filter: printing postscript on non-postscript
\
 printer + text as postscript Keywords: Postscript Printing text

 Maintained-by:
 Primary-site:
sunsite.unc.edu:/pub/Linux/system/Printing/ps-printcap.tgz

and the files in the tgz were:
 /etc/printcap
  lp: \
  :lp:lp=/dev/lp1: \
  :sd=/var/spool/lpd/lp: \
  :mx%0: \
  :if=/etc/filter: \
  :sh:

 /etc/filter
  #!/bin/sh
  # Set the PRINTER var to a "gs" device.
  # Try gs -h for a list of drivers

  #PRINTER=djet500 # original - changed to try out my epson
  #PRINTER=deskjet
  PRINTER=epson
  nenscript -ZB -p- | gs -q -sDEVICE=$PRINTER \
          -dA4 -dNOPAUSE \
   -dSAFER -sOutputFile=- -

i installed these and tried to print ascii text files but these were
unsuccessful.  (i have nenscript 1.13++ installed).  i even tried
  nenscript -ZB -p- | gs -q -sDEVICE=$PRINTER -dA4 -dNOPAUSE -dSAFER
-sOutputFile=- - | lpr

from the command line

can someone *please* tell me where i'm going wrong on this but even
better, can someone please give me information (or preferably send me)
for setting up their /etc/termcap and /etc/filter files for PRINTING
POSTSCIPT onto my NON-POSTSCRIPT printers which are:
 epson lq100 (told you it was really old and nasty!!!)
 hp 600

this would be a greate help for my work.  any help and advice will be
greatly appreciated and i'll definitely give you acknowledgement in my
work !!! (no hard cash i'm affraid - i'm still studying :-) )

cheers

ray

ps - can people cc their replies to me - thanks again

anyone who has viewed src code in 1up will know what a help it is to
have something that'll dump 2 or 4 (or even 6) pages of src code onto
one a4 page!!!

2. libjpeg

3. HELP: Print PostScript file on Non-PostScript-Printer

4. Anybody using mechanical CAD packages under Linux?

5. Problems printing on NEC Postscript Printer

6. about run a program in C codes.

7. NEC PostScript printer problem

8. Error compiling 3c59x.c

9. Need help configuring printer que for postscript

10. Need help with NEC 860 printer

11. Please Help: Need a printcap entry for NEC silentwriter color printer

12. Help needed: My Postscript printer hangs, when printing graphics

13. Help: /etc/printcap for EPSON LP-9000 printer ( postscript printer)