Board index Linux Hardware

olympus D-100 digital Camera not working

olympus D-100 digital Camera not working

Post by Bra » Mon, 13 May 2002 03:16:03



i have recently install the olympus d-100 camedia camera but when i
plug the camera in i get

usb-storage: Fixing INQUIRY data to show SCSI rev 2
usb-storage: scsi cmd done, result=0x70000
usb-storage: *** thread sleeping.
usb-storage: Bulk soft reset completed
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command TEST_UNIT_READY (6 bytes)
usb-storage: 00 00 00 00 00 00 00 00 45 1b 1c c0
usb-storage: Bulk command S 0x43425355 T 0x228 Trg 0 LUN 0 L 0 F 0 CL
6
usb-storage: Bulk command transfer result=0
usb-storage: Attempting to get CSW...
usb-storage: Bulk status result = 0
usb-storage: Bulk status Sig 0x55425355 T 0x228 R 0 Stat 0x1
usb-storage: Bulk logical error
usb-storage: Bulk reset requested
usb-storage: Bulk soft reset completed
usb-storage: -- transport indicates transport failure
usb-storage: scsi cmd done, result=0x70000
usb-storage: *** thread sleeping.
usb-storage: bus_reset() called
hub.c: port 1 reset change
hub.c: port 1, portstatus 103, change 0, 12 Mb/s
usb.c: ignoring set_interface for dev 6, iface 0, alt 0
usb-storage: bus_reset() complete
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command TEST_UNIT_READY (6 bytes)
usb-storage: 00 00 00 00 00 00 00 00 45 1b 1c c0
usb-storage: Bulk command S 0x43425355 T 0x228 Trg 0 LUN 0 L 0 F 0 CL
6
usb-storage: Bulk command transfer result=0
usb-storage: Attempting to get CSW...
usb-storage: Bulk status result = 0
usb-storage: Bulk status Sig 0x55425355 T 0x228 R 0 Stat 0x0
usb-storage: Bulk logical error
usb-storage: Bulk reset requested
usb-storage: Bulk soft reset completed
usb-storage: -- transport indicates transport failure
usb-storage: scsi cmd done, result=0x70000
usb-storage: *** thread sleeping.
scsi: device set offline - not ready or command retry failed after bus
reset: host 1 channel 0 id 0 lun 0

usb-storage: *** thread sleeping.
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 6
usb.c: usb-storage driver claimed interface c6a253c0
USB Mass Storage support registered.

Does anyone know if this camera will even work with linux?
I have kernel 2.4.18 and
all required usb modules

It looks like my problem has to do with the scsi device not being
created

any help will be greatly apreciated thanks

 
 
 
Top

olympus D-100 digital Camera not working

Post by Bra » Mon, 13 May 2002 08:29:38


Ok to get this camera to work in linux you need  to edit one line in
the file transport.h in the linux kernel source for usb mass storage.
The corrected line should read:
#define US_BULK_CS_SIGN0x55425355/* spells out 'USBS' */
the line being edited looks just like this but i think the 55425355 is
5325355.

after changing this you can remake your modules and lsmod the
mass_storage module. Mount the scsi device that has been created
mount -t vfat /dev/sda1 /home/camera

view you pictures with any picture viewer.


> i have recently install the olympus d-100 camedia camera but when i
> plug the camera in i get

> usb-storage: Fixing INQUIRY data to show SCSI rev 2
> usb-storage: scsi cmd done, result=0x70000
> usb-storage: *** thread sleeping.
> usb-storage: Bulk soft reset completed
> usb-storage: queuecommand() called
> usb-storage: *** thread awakened.
> usb-storage: Command TEST_UNIT_READY (6 bytes)
> usb-storage: 00 00 00 00 00 00 00 00 45 1b 1c c0
> usb-storage: Bulk command S 0x43425355 T 0x228 Trg 0 LUN 0 L 0 F 0 CL
> 6
> usb-storage: Bulk command transfer result=0
> usb-storage: Attempting to get CSW...
> usb-storage: Bulk status result = 0
> usb-storage: Bulk status Sig 0x55425355 T 0x228 R 0 Stat 0x1
> usb-storage: Bulk logical error
> usb-storage: Bulk reset requested
> usb-storage: Bulk soft reset completed
> usb-storage: -- transport indicates transport failure
> usb-storage: scsi cmd done, result=0x70000
> usb-storage: *** thread sleeping.
> usb-storage: bus_reset() called
> hub.c: port 1 reset change
> hub.c: port 1, portstatus 103, change 0, 12 Mb/s
> usb.c: ignoring set_interface for dev 6, iface 0, alt 0
> usb-storage: bus_reset() complete
> usb-storage: queuecommand() called
> usb-storage: *** thread awakened.
> usb-storage: Command TEST_UNIT_READY (6 bytes)
> usb-storage: 00 00 00 00 00 00 00 00 45 1b 1c c0
> usb-storage: Bulk command S 0x43425355 T 0x228 Trg 0 LUN 0 L 0 F 0 CL
> 6
> usb-storage: Bulk command transfer result=0
> usb-storage: Attempting to get CSW...
> usb-storage: Bulk status result = 0
> usb-storage: Bulk status Sig 0x55425355 T 0x228 R 0 Stat 0x0
> usb-storage: Bulk logical error
> usb-storage: Bulk reset requested
> usb-storage: Bulk soft reset completed
> usb-storage: -- transport indicates transport failure
> usb-storage: scsi cmd done, result=0x70000
> usb-storage: *** thread sleeping.
> scsi: device set offline - not ready or command retry failed after bus
> reset: host 1 channel 0 id 0 lun 0

> usb-storage: *** thread sleeping.
> WARNING: USB Mass Storage data integrity not assured
> USB Mass Storage device found at 6
> usb.c: usb-storage driver claimed interface c6a253c0
> USB Mass Storage support registered.

> Does anyone know if this camera will even work with linux?
> I have kernel 2.4.18 and
> all required usb modules

> It looks like my problem has to do with the scsi device not being
> created

> any help will be greatly apreciated thanks


 
 
 
Top

olympus D-100 digital Camera not working

Post by George Ranki » Tue, 21 May 2002 04:33:38


just for curiosity... how did you get this number?
I have a digital camera, but I don't know if i will ever manage to make it work.
When i install the usb-storage module nothing change and on lsmod it appears as
unused.
Any advice?
thanks.
> #define US_BULK_CS_SIGN0x55425355/* spells out 'USBS' */
> the line being edited looks just like this but i think the 55425355 is
> 5325355.

> after changing this you can remake your modules and lsmod the
> mass_storage module. Mount the scsi device that has been created
> mount -t vfat /dev/sda1 /home/camera

> view you pictures with any picture viewer.


> > i have recently install the olympus d-100 camedia camera but when i
> > plug the camera in i get

> > usb-storage: Fixing INQUIRY data to show SCSI rev 2
> > usb-storage: scsi cmd done, result=0x70000
> > usb-storage: *** thread sleeping.
> > usb-storage: Bulk soft reset completed
> > usb-storage: queuecommand() called
> > usb-storage: *** thread awakened.
> > usb-storage: Command TEST_UNIT_READY (6 bytes)
> > usb-storage: 00 00 00 00 00 00 00 00 45 1b 1c c0
> > usb-storage: Bulk command S 0x43425355 T 0x228 Trg 0 LUN 0 L 0 F 0 CL
> > 6
> > usb-storage: Bulk command transfer result=0
> > usb-storage: Attempting to get CSW...
> > usb-storage: Bulk status result = 0
> > usb-storage: Bulk status Sig 0x55425355 T 0x228 R 0 Stat 0x1
> > usb-storage: Bulk logical error
> > usb-storage: Bulk reset requested
> > usb-storage: Bulk soft reset completed
> > usb-storage: -- transport indicates transport failure
> > usb-storage: scsi cmd done, result=0x70000
> > usb-storage: *** thread sleeping.
> > usb-storage: bus_reset() called
> > hub.c: port 1 reset change
> > hub.c: port 1, portstatus 103, change 0, 12 Mb/s
> > usb.c: ignoring set_interface for dev 6, iface 0, alt 0
> > usb-storage: bus_reset() complete
> > usb-storage: queuecommand() called
> > usb-storage: *** thread awakened.
> > usb-storage: Command TEST_UNIT_READY (6 bytes)
> > usb-storage: 00 00 00 00 00 00 00 00 45 1b 1c c0
> > usb-storage: Bulk command S 0x43425355 T 0x228 Trg 0 LUN 0 L 0 F 0 CL
> > 6
> > usb-storage: Bulk command transfer result=0
> > usb-storage: Attempting to get CSW...
> > usb-storage: Bulk status result = 0
> > usb-storage: Bulk status Sig 0x55425355 T 0x228 R 0 Stat 0x0
> > usb-storage: Bulk logical error
> > usb-storage: Bulk reset requested
> > usb-storage: Bulk soft reset completed
> > usb-storage: -- transport indicates transport failure
> > usb-storage: scsi cmd done, result=0x70000
> > usb-storage: *** thread sleeping.
> > scsi: device set offline - not ready or command retry failed after bus
> > reset: host 1 channel 0 id 0 lun 0

> > usb-storage: *** thread sleeping.
> > WARNING: USB Mass Storage data integrity not assured
> > USB Mass Storage device found at 6
> > usb.c: usb-storage driver claimed interface c6a253c0
> > USB Mass Storage support registered.

> > Does anyone know if this camera will even work with linux?
> > I have kernel 2.4.18 and
> > all required usb modules

> > It looks like my problem has to do with the scsi device not being
> > created

> > any help will be greatly apreciated thanks

 
 
 
Top

1. Olympus digital camera and Linux

Dear experts,

I have just bought an Olympus mju-300 (aka stylus 300) and I have failed
to make it communicate with any of the three 'photo-programs' I found
in Mandrake 9.1. The camera is hooked up to the computer via USB and
the hardware config. utility of Mandrake identifies it correctly
but the programs ignore it and /mnt/camera is empty.

I have scanned google for 'olympus stylus 300 linux' but basically
only found a zillion copies of the same very positive 'private' 'review'
of the camera. Any leads will be greatfully accepted. Untill then I
will have to resort to booting into my Win98 to download pictures.

Cheers,

--
========================================================================

                                     "Problems worthy of attack
                                      prove their worth by hitting back"
                                                              Piet Hein
========================================================================

2. ip counting under openbsd 3.0 stable?

3. OLYMPUS C400 Digital Camera and Linux ?

4. Linux performance (a few stats)

5. Olympus digital camera and Linux

6. PS/2 Mouse->Serial Adaptor w/Linux(X)

7. Reading SmartMedia files from Olympus Digital Camera

8. aha274x. How to utilize?

9. driver for Olympus c3040 digital camera using usb?

10. Olympus digital camera

11. set up Olympus D360L digital camera in Red Hat 8.0

12. RadioShack Flatfoto or Ultra-Pocket Digital Camera or Creative CardCam or Logitech Pocket Digital Camera

13. CASIO QV-100 digital camera


All times are UTC
Board index