Stealth64 Video 3200

Board index Linux Hardware

Stealth64 Video 3200

by cgon.. » Fri, 26 Apr 1996 04:00:00

I'm trying to set up this video card. Does it have a programmable clock
chip, and if so which one.

craig

Top

1. ?Xserver for Stealth64 Video 3200 video card?

The question is what X server should I use for
Diamond Multimedia Stealth64 Video 3200 video card???

Thank you in advance.
-----
I have problem with my Diamond Multimedia
Stealth64 Video 3200 video card with fixed 2MB VRAM.

Its manual says:
It uses 64-bit graphics accelerator chip.
It is *backwards* compatible with most programs that
ran with a S3 928 based VGA card.

So I use /usr/X11/bin/XF86_S3 as my X server.
It turns out the pointer will point half character
right of the actual position no matter what VideoMode
I use.

I tried XF86_Mono and XF86_VGA16 servers, they work fine.
But they can not take advantage of my 2M VRAM.
The XF86_SVGA server can only see 64k RAM, so it doesn't work.

So what X server should I use?

--Ed

encl:
One of the following servers is required(from Howto document):

XF86-3.1.1-8514.tar.gz
Server for 8514-based boards.

XF86-3.1.1-AGX.tar.gz
Server for AGX-based boards.

XF86-3.1.1-Mach32.tar.gz
Server for Mach32-based boards.

XF86-3.1.1-Mach8.tar.gz
Server for Mach8-based boards.

XF86-3.1.1-Mono.tar.gz
Server for monochrome video modes.

XF86-3.1.1-P9000.tar.gz
Server for P9000-based boards.

XF86-3.1.1-S3.tar.gz
Server for S3-based boards.

XF86-3.1.1-SVGA.tar.gz
Server for Super VGA-based boards.

XF86-3.1.1-VGA16.tar.gz
Server for VGA/EGA-based boards.