Very Computer

1. Help mounting a USB Compact Flash Reader with 64MB card

Hey all,

I've managed to start an install for OpenBSD, but I want to install to a
compact flash card.

dmesg says the card is there as sd0c, but I can't mount it because of
the following messages:

sd0: mode sense (5) return nonsense; using fictitiuous geometery
sd0(umass0:0:0): Ckech Condition on opcode 0x8
   SENSE KEY: Illegal Request
   ADSC/ASCQ: ASC 0x20 ASCQ 0x00

Here's what dmesg says about the drive:

emBSD 2.0-stable (RAMDISK_CD) #4: Tue Mar 5 08:40:08 EST 2002
(emBSD is based off of OpenBSD-current)
...

umass0 at uhub0 port 2 configuration 1 interface 0
umass0: vendor 0.090c CF Reader, rev 1.00/1.00, addr 2
umass0: using SCSI over BBB-P
scsibus1 at umass0: 2 targets
sd at scsibus1 targ 1 lun 0: <, CF Reader, 1.04> SCSI0 0/direct removable
sd0: mode sense (5) returned nonsense; using fictitious geometry
sd0: 62MB, 62 cyl, 64 head, 32 sec, 512 bytes/sec, 128832 sec total
(and then repeat the above messages)

Any ideas on how to get this thing to mount and install properly?

James

2. rp-pppoe under 5.8

3. USB Compact Flash Card Reader from SCM Micro

4. EIDE under Linux?

5. Help recognizing USB Compact Flash Reader and card

6. ftp in while loop

7. USB Compact Flash Reader, Help with setup

8. Linux NAT again

9. USB Compact Flash Readers

10. SanDisk Compact Flash USB Reader (SDDR-31): WHICH DEVICE?

11. Boot from USB compact flash reader...?

12. block devices & module leading & USB Compact Flash readers

13. USB compact flash readers anyone?