by Wei F » Sat, 03 Jan 1998 04:00:00
Hi,
I am trying to install Linux on my home computer. The first problem I
have is whether I can find the driver for Mylex/BusLogic BT-930 SCSI
adapter. I have searched some sites, but haven't found the right one. Am
I out of luck?
Any suggestion?
Thanks,
-wei
by v_.. » Sun, 04 Jan 1998 04:00:00
> Hi,
> I am trying to install Linux on my home computer. The first problem I
> have is whether I can find the driver for Mylex/BusLogic BT-930 SCSI
> adapter. I have searched some sites, but haven't found the right one. Am
> I out of luck?
> Any suggestion?
> Thanks,
> -wei
Mike
by Cokey de Perci » Sun, 04 Jan 1998 04:00:00
> > Hi,
> > I am trying to install Linux on my home computer. The first problem I
> > have is whether I can find the driver for Mylex/BusLogic BT-930 SCSI
> > adapter. I have searched some sites, but haven't found the right one. Am
> > I out of luck?
> > Any suggestion?
> > Thanks,
> > -wei
> Go to mylex.com, there is a link there for Mylex drivers. FWIW, the
> driver for my BT-948 was already in the kernel (2.0.31).
> Mike
Best
Cokey
--
------------------------------------------------------------------
Cokey de Percin, DBA Email:
by Mike Trett » Mon, 05 Jan 1998 04:00:00
>I am trying to install Linux on my home computer. The first problem I
>have is whether I can find the driver for Mylex/BusLogic BT-930 SCSI
>adapter. I have searched some sites, but haven't found the right one. Am
>I out of luck?
>Any suggestion?
>Thanks,
>-wei
--
Mike Trettel trettel (at) fred dot net sig v2.2
Sending unsolicitated commercial e-mail to this address is a waste of time.
---------------------------------------------------------------------------
Are you mentally here at Pizza Hut??
by Alexander Dukho » Thu, 08 Jan 1998 04:00:00
I have the same SCSI adapter in my PC and I don't have any problem with
drivers. Try http://www.dandelion.com/Linux/BusLogic.html
You'll find all the info you will need there.
Good luck,
Alex Dukhon.
> I am trying to install Linux on my home computer. The first problem I
> have is whether I can find the driver for Mylex/BusLogic BT-930 SCSI
> adapter. I have searched some sites, but haven't found the right one. Am
> I out of luck?
> Any suggestion?
> Thanks,
> -wei
1. BusLogic BT-930 SCSI adapter
I am trying to install linux on a P133 system (Micron Millenia Plus)
that has a BusLogic BT-930 ultra SCSI host adapter with a 2GB SCSI
Conner hard drive. The port IO address of the adapter is set by the
BIOS (PhoenixBIOS version 4.04) to 0xF800. Using
ramdisk buslogic=0xf800 complains of illegal address. I understand
that for buslogic cards the adresses supported are 0x130, 0x230, 0x330
Has anyone used this SCSI card with linux? Is there a way to change the
port IO address in the BIOS, and if yes will the
ramdisk buslogic=0xNNN will make recognize the adapter at boot?
Any comments/suggestions?
Thanks,
Dimitris.
3. Buslogic ultra scsi BT-930(FlashPoint) and Linux...
4. TLI question resolved? (Was: How do I get a free port?)
5. HELP: Intallation Difficulties, Buslogic BT-930 FlashPoint SCSI not found
6. sharing netscape 4.5 files between linux and nt4 - almost there, but...
7. Forget Adaptec - Buy the Buslogic BT-930 for $44.50
9. Buslogic Flashpoint LT (BT-930) linux support?
10. Where to find the kernel support BusLogic FlashPoint LT (BT-930)
11. Scanner and BusLogic BT-930
12. Yamaha 8424S and Buslogic BT-930 problem
13. Anyone have a Buslogic BT-930?