Hi!
This works with 2.0.3x kernels, but doesn't with my current
2.1.125.. I have 440lx motherboard.
What's wrong with those kernels?
--
Andrew
by Andrew V. Shuvalo » Sun, 08 Nov 1998 04:00:00
--
Andrew
by Eric Barend » Mon, 09 Nov 1998 04:00:00
Thanks..
Eric
> --
> Andrew
by Joachim Karre » Fri, 13 Nov 1998 04:00:00
> Can I ask how you got yours to work? It's one of the 2 last things I
> need to get working to say I can be productive in Linux :).. I've tried
> recompiling the kernel, a different kernel (suggested by redhat
> support), but nothing has worked.
> Thanks..
> Eric
> > Hi!
> > This works with 2.0.3x kernels, but doesn't with my current
> > 2.1.125.. I have 440lx motherboard.
> > What's wrong with those kernels?
> > --
> > Andrew
Joe
by Kris Vorwer » Fri, 13 Nov 1998 04:00:00
> > Can I ask how you got yours to work? It's one of the 2 last things I
> > need to get working to say I can be productive in Linux :).. I've tried
> > recompiling the kernel, a different kernel (suggested by redhat
> > support), but nothing has worked.
> > Thanks..
> > Eric
> > > Hi!
> > > This works with 2.0.3x kernels, but doesn't with my current
> > > 2.1.125.. I have 440lx motherboard.
> > > What's wrong with those kernels?
> > > --
> > > Andrew
> Would you remind me too, if you get it working. Thanks
--
kris vorwerk
2a computer engineering
university of waterloo
by Paul Strou » Thu, 19 Nov 1998 04:00:00
Paul
> > Can I ask how you got yours to work? It's one of the 2 last things I
> > need to get working to say I can be productive in Linux :).. I've tried
> > recompiling the kernel, a different kernel (suggested by redhat
> > support), but nothing has worked.
> > Thanks..
> > Eric
> > > Hi!
> > > This works with 2.0.3x kernels, but doesn't with my current
> > > 2.1.125.. I have 440lx motherboard.
> > > What's wrong with those kernels?
> > > --
> > > Andrew
> Would you remind me too, if you get it working. Thanks
> Joe
1. Acer, Linux and Yamaha OPL3-SAx PnP
Hello World,
I've recently bought a Acer Extensa 501T and installed SuSE 6.1. on it.
Everything works fine, except the soundcard, a Yamaha OPL3-SAx PnP. I've
installed and configured isapnp. isapnp finds the cards and sets
addresses, irq and dmas (They worked on the pre-installed win98) and there
is no conflict with other settings. I compiled the Sound-Support, the
OSS-Support and the Yamaha OPL3-SAx-Support as modules. In
/etc/conf.modules, I set the same addresses, irq and dmas I received from
pnpdump (and isapnp is configured with).
New if I start a sound-program (mikmod, x11amp, xsidplay) the program is
started, but play doen't work. The play-function seem to be activated, but
time remains at 00:00 and that is on all the programs mentioned above.
lsmod shows me the following modules
sound
soundcore
ad1848
BUT cat /proc/dma
4: cascade
7: MSS Sound Codec
But the soundcards needs two dma channels 0 and 7. Both channels are set
in isapnp.conf and conf.modules (both in /etc of course)
I use SuSe 6.1. but I updated to kernel 2.2.7 (although 2.2.5 did not work
either).
Does anyone know how to resolve this problem?
Any help is welcome!
Regards
Andreas
--
("`-''-/").___..--''"`-._
`o_ o ) `-. ( ).`-.__.`)
(_Y_.)' ._ ) `._ `. ``-..-'
_..`--'_..-_/ /--'_.' .'
(il).-'' (li).' ((!.-'
http://www.vis.ethz.ch/~andy ICQ-No. 14356454
3. need how to configure yamaha opl3 sax non-pnp on linux 5.2
4. syslogd, CONSOLE and hastart
5. Found Solution to Yamaha OPL3-SAx soundcard config!
6. Copying from CDROM to floppy - why does HD go active?
8. Need a sendmail config for my network.
9. Yamaha PNP-OPL3-SA soundcard and Red Hat Linux 5.1
10. Yamaha YMF-214/OPL3-SAX in Linux
11. Yamaha OPL3-SAX sound card...
12. Yamaha OPL3-SAx