soundcard SoundBlaster PCI128 or SoundBlaster live1024 problem

soundcard SoundBlaster PCI128 or SoundBlaster live1024 problem

Post by boris gerlac » Mon, 16 Aug 2004 14:54:03



Hi

I have a SuSE 9.1 Linux client running
on a 500 MHz P3 with KDE3.2 and more or less
all works fine, except the soundcard.
Either I use SB PCI128 or SB live1024 the same problem appears.
The soundcard will be recognized by YAST well, I initialize
the card and after the system saves the new configuration.
The soundcard works fine.
But after every reboot, the soundcard is quite, nothing to hear
and in YAST the loudness menue is not reachable.
I have to reinit and reconfig the card new. After this
reinit and reconfig the soundcard works again fine,
until next reboot of the computer.
It seems, that the System is not able to remember
the init and config of the (of any) soundcard.
With SuSE 7.0 no problem.
Also /etc/modules.conf is empty but chmod is 777.

What am I doing wrong?

Boris Gerlach

 
 
 

soundcard SoundBlaster PCI128 or SoundBlaster live1024 problem

Post by Noi » Tue, 17 Aug 2004 17:33:49



> Hi

> I have a SuSE 9.1 Linux client running
> on a 500 MHz P3 with KDE3.2 and more or less
> all works fine, except the soundcard.
> Either I use SB PCI128 or SB live1024 the same problem appears.
> The soundcard will be recognized by YAST well, I initialize
> the card and after the system saves the new configuration.
> The soundcard works fine.
> But after every reboot, the soundcard is quite, nothing to hear
> and in YAST the loudness menue is not reachable.
> I have to reinit and reconfig the card new. After this
> reinit and reconfig the soundcard works again fine,
> until next reboot of the computer.
> It seems, that the System is not able to remember
> the init and config of the (of any) soundcard.
> With SuSE 7.0 no problem.
> Also /etc/modules.conf is empty but chmod is 777.

> What am I doing wrong?

> Boris Gerlach

What messages are you getting from boot log and dmesg?
lspci ?  lsmod ?

 
 
 

soundcard SoundBlaster PCI128 or SoundBlaster live1024 problem

Post by boris gerlac » Fri, 20 Aug 2004 13:36:44


Noi wrote:

[soundcard init pblm after reeboot]

Sorry or the size.

Boris

> What messages are you getting from boot log and dmesg?
> lspci ?  lsmod ?

dmesg:

drstrange@vigor10:~> dmesg
Linux version 2.6.4-52-default (geeko@buildhost) (gcc version 3.3.3
(SuSE Linux)) #1 Wed Apr 7 02:08:30 UTC 2004
BIOS-provided physical RAM map:
  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
  BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
  BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
  BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
501MB vmalloc/ioremap area available.
0MB HIGHMEM available.
511MB LOWMEM available.
On node 0 totalpages: 131056
   DMA zone: 4096 pages, LIFO batch:1
   Normal zone: 126960 pages, LIFO batch:16
   HighMem zone: 0 pages, LIFO batch:1
DMI 2.1 present.
ACPI disabled because your bios is from 98 and too old
You can enable it with acpi=force
Built 1 zonelists
Kernel command line: root=/dev/hdb3 vga=0x31a desktop resume=/dev/hdb2
splash=silent
bootsplash: silent mode.
Initializing CPU#0
PID hash table entries: 2048 (order 11: 16384 bytes)
CKRM Initialized
Detected 501.292 MHz processor.
Using tsc for high-res timesource
Console: colour dummy device 80x25
Memory: 514960k/524224k available (1969k kernel code, 8492k reserved,
677k data, 212k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 989.18 BogoMIPS
Security Scaffold v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
There is already a security framework initialized, register_security failed.
Failure registering capabilities with the kernel
selinux_register_security:  Registering secondary module capability
Capability LSM initialized
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
checking if image is initramfs...it isn't (no cpio magic); looks like an
initrd
Looking for DSDT in initrd ...No customized DSDT found in initrd!
Freeing initrd memory: 1136k freed
CPU:     After generic identify, caps: 0387f9ff 00000000 00000000 00000000
CPU:     After vendor identify, caps: 0387f9ff 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU serial number disabled.
CPU:     After all inits, caps: 0383f9ff 00000000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel Pentium III (Katmai) stepping 03
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
do_initcalls
init_elf_binfmt
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb240, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
ACPI: ACPI tables contain no PCI IRQ routing entries
PCI: Invalid ACPI-PCI IRQ routing table
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
  ... the first call_usermodehelper: pci_bus
PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:07.0
vesafb: framebuffer at 0xe6000000, mapped to 0xe0800000, size 4096k
vesafb: mode is 1280x1024x16, linelength=2560, pages=0
vesafb: protected mode interface info at c000:042b
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
fb0: VESA VGA frame buffer device
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
Initial HugeTLB pages allocated: 0
ikconfig 0.7 with /proc/config*
VFS: Disk quotas dquot_6.5.1
SELinux:  Registering netfilter hooks
Initializing Cryptographic API
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
bootsplash 3.1.6-2004/03/31: looking for picture.... silentjpeg size
52139 bytes, does not fit into framebuffer.
  found (1280x1024, 24562 bytes, v3).
Console: switching to colour frame buffer device 147x55
Real Time Clock Driver v1.12
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
     ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
     ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
hda: IBM-DJNA-351520, ATA DISK drive
hdb: IBM-DJNA-371350, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: TOSHIBA DVD-ROM SD-M1402, ATAPI CD/DVD-ROM drive
hdd: HL-DT-ST DVDRAM GSA-4082B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 30033360 sectors (15377 MB) w/430KiB Cache, CHS=29795/16/63, UDMA(33)
  hda: hda1 hda2 < hda5 >
hdb: max request size: 128KiB
hdb: 26520480 sectors (13578 MB) w/1966KiB Cache, CHS=26310/16/63, UDMA(33)
  hdb: hdb1 hdb2 hdb3
ide-floppy driver 0.99.newide
mice: PS/2 mouse device common for all mice
input: PC Speaker
serio: i8042 AUX port at 0x60,0x64 irq 12
input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 8
NET: Registered protocol family 20
Resume Machine: resuming from /dev/hdb2
Resuming from device hdb2
Resume Machine: This is normal swap space
PM: Reading pmdisk image.
PM: Resume from disk failed.
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
ReiserFS: hdb3: found reiserfs format "3.6" with standard journal
ReiserFS: hdb3: using ordered data mode
ReiserFS: hdb3: journal params: device hdb3, size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
ReiserFS: hdb3: checking transaction log (hdb3)
ReiserFS: hdb3: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Trying to move old root to /initrd ... failed
Unmounting old root
Trying to free ramdisk memory ... okay
Freeing unused kernel memory: 212k freed
Adding 130528k swap on /dev/hdb2.  Priority:42 extents:1
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: d...@uk.sistina.com
subfs 0.9
PCI: Found IRQ 5 for device 0000:00:10.0
PCI: Sharing IRQ 5 with 0000:00:14.0
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
0000:00:10.0: 3Com PCI 3c905 Boomerang 100baseTx at 0xe400. Vers LK1.1.19
eth0: Dropping NETIF_F_SG since no checksum feature.
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 440BX Chipset.
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 64M @ 0xe0000000
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
USB Universal Host Controller Interface driver v2.2
PCI: Found IRQ 10 for device 0000:00:07.2
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: irq 10, io base 0000e000
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.4-52-default uhci_hcd
usb usb1: SerialNumber: 0000:00:07.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usb 1-1: new full speed USB device using address 2
usb 1-1: SerialNumber: 0213021120117B17
usb 1-2: new full speed USB device using address 3
usb 1-2: Product: Generic USB Hub
usb 1-2: Manufacturer: ALCOR
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
gameport: pci0000:00:14.1 speed 1325 kHz
drivers/usb/core/usb.c: registered new driver snd-usb-audio
powernow: This module only works with AMD K7 CPUs
hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hda: drive_cmd: error=0x04 { DriveStatusError }
hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hda: task_no_data_intr: error=0x04 { DriveStatusError }
hdb: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdb: drive_cmd: error=0x04 { DriveStatusError }
NET: Registered protocol family 10
Disabled Privacy Extensions on device c03545c0(lo)
IPv6 over IPv4 tunneling driver
hdb: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: task_no_data_intr: error=0x04 { DriveStatusError }
Disabled Privacy Extensions on device dec13c00(sit0)
parport0: PC-style at 0x378 [PCSPP]
parport0: irq 7 detected
lp0: using parport0 (polling).
drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
drivers/usb/core/usb.c: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
Non-volatile memory driver v1.2
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
hdc: ATAPI 40X DVD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 32X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
SCSI subsystem initialized
st: Version 20040318, fixed bufsize 32768, s/g segs 256
BIOS EDD facility v0.13 2004-Mar-09, 2 devices found
eth0: no IPv6 routers ...

read more »

 
 
 

soundcard SoundBlaster PCI128 or SoundBlaster live1024 problem

Post by boris gerlac » Fri, 20 Aug 2004 13:37:29


Noi wrote:

[soundcard init pblm after reeboot]

Sorry for the size.

Boris

> What messages are you getting from boot log and dmesg?
> lspci ?  lsmod ?

dmesg:

drstrange@vigor10:~> dmesg
Linux version 2.6.4-52-default (geeko@buildhost) (gcc version 3.3.3
(SuSE Linux)) #1 Wed Apr 7 02:08:30 UTC 2004
BIOS-provided physical RAM map:
  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
  BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
  BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
  BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
501MB vmalloc/ioremap area available.
0MB HIGHMEM available.
511MB LOWMEM available.
On node 0 totalpages: 131056
   DMA zone: 4096 pages, LIFO batch:1
   Normal zone: 126960 pages, LIFO batch:16
   HighMem zone: 0 pages, LIFO batch:1
DMI 2.1 present.
ACPI disabled because your bios is from 98 and too old
You can enable it with acpi=force
Built 1 zonelists
Kernel command line: root=/dev/hdb3 vga=0x31a desktop resume=/dev/hdb2
splash=silent
bootsplash: silent mode.
Initializing CPU#0
PID hash table entries: 2048 (order 11: 16384 bytes)
CKRM Initialized
Detected 501.292 MHz processor.
Using tsc for high-res timesource
Console: colour dummy device 80x25
Memory: 514960k/524224k available (1969k kernel code, 8492k reserved,
677k data, 212k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 989.18 BogoMIPS
Security Scaffold v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
There is already a security framework initialized, register_security failed.
Failure registering capabilities with the kernel
selinux_register_security:  Registering secondary module capability
Capability LSM initialized
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
checking if image is initramfs...it isn't (no cpio magic); looks like an
initrd
Looking for DSDT in initrd ...No customized DSDT found in initrd!
Freeing initrd memory: 1136k freed
CPU:     After generic identify, caps: 0387f9ff 00000000 00000000 00000000
CPU:     After vendor identify, caps: 0387f9ff 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU serial number disabled.
CPU:     After all inits, caps: 0383f9ff 00000000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel Pentium III (Katmai) stepping 03
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
do_initcalls
init_elf_binfmt
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb240, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
ACPI: ACPI tables contain no PCI IRQ routing entries
PCI: Invalid ACPI-PCI IRQ routing table
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
  ... the first call_usermodehelper: pci_bus
PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:07.0
vesafb: framebuffer at 0xe6000000, mapped to 0xe0800000, size 4096k
vesafb: mode is 1280x1024x16, linelength=2560, pages=0
vesafb: protected mode interface info at c000:042b
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
fb0: VESA VGA frame buffer device
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
Initial HugeTLB pages allocated: 0
ikconfig 0.7 with /proc/config*
VFS: Disk quotas dquot_6.5.1
SELinux:  Registering netfilter hooks
Initializing Cryptographic API
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
bootsplash 3.1.6-2004/03/31: looking for picture.... silentjpeg size
52139 bytes, does not fit into framebuffer.
  found (1280x1024, 24562 bytes, v3).
Console: switching to colour frame buffer device 147x55
Real Time Clock Driver v1.12
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
     ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
     ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
hda: IBM-DJNA-351520, ATA DISK drive
hdb: IBM-DJNA-371350, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: TOSHIBA DVD-ROM SD-M1402, ATAPI CD/DVD-ROM drive
hdd: HL-DT-ST DVDRAM GSA-4082B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 30033360 sectors (15377 MB) w/430KiB Cache, CHS=29795/16/63, UDMA(33)
  hda: hda1 hda2 < hda5 >
hdb: max request size: 128KiB
hdb: 26520480 sectors (13578 MB) w/1966KiB Cache, CHS=26310/16/63, UDMA(33)
  hdb: hdb1 hdb2 hdb3
ide-floppy driver 0.99.newide
mice: PS/2 mouse device common for all mice
input: PC Speaker
serio: i8042 AUX port at 0x60,0x64 irq 12
input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 8
NET: Registered protocol family 20
Resume Machine: resuming from /dev/hdb2
Resuming from device hdb2
Resume Machine: This is normal swap space
PM: Reading pmdisk image.
PM: Resume from disk failed.
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
ReiserFS: hdb3: found reiserfs format "3.6" with standard journal
ReiserFS: hdb3: using ordered data mode
ReiserFS: hdb3: journal params: device hdb3, size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
ReiserFS: hdb3: checking transaction log (hdb3)
ReiserFS: hdb3: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Trying to move old root to /initrd ... failed
Unmounting old root
Trying to free ramdisk memory ... okay
Freeing unused kernel memory: 212k freed
Adding 130528k swap on /dev/hdb2.  Priority:42 extents:1
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: d...@uk.sistina.com
subfs 0.9
PCI: Found IRQ 5 for device 0000:00:10.0
PCI: Sharing IRQ 5 with 0000:00:14.0
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
0000:00:10.0: 3Com PCI 3c905 Boomerang 100baseTx at 0xe400. Vers LK1.1.19
eth0: Dropping NETIF_F_SG since no checksum feature.
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 440BX Chipset.
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 64M @ 0xe0000000
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
USB Universal Host Controller Interface driver v2.2
PCI: Found IRQ 10 for device 0000:00:07.2
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: irq 10, io base 0000e000
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.4-52-default uhci_hcd
usb usb1: SerialNumber: 0000:00:07.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usb 1-1: new full speed USB device using address 2
usb 1-1: SerialNumber: 0213021120117B17
usb 1-2: new full speed USB device using address 3
usb 1-2: Product: Generic USB Hub
usb 1-2: Manufacturer: ALCOR
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
gameport: pci0000:00:14.1 speed 1325 kHz
drivers/usb/core/usb.c: registered new driver snd-usb-audio
powernow: This module only works with AMD K7 CPUs
hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hda: drive_cmd: error=0x04 { DriveStatusError }
hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hda: task_no_data_intr: error=0x04 { DriveStatusError }
hdb: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdb: drive_cmd: error=0x04 { DriveStatusError }
NET: Registered protocol family 10
Disabled Privacy Extensions on device c03545c0(lo)
IPv6 over IPv4 tunneling driver
hdb: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: task_no_data_intr: error=0x04 { DriveStatusError }
Disabled Privacy Extensions on device dec13c00(sit0)
parport0: PC-style at 0x378 [PCSPP]
parport0: irq 7 detected
lp0: using parport0 (polling).
drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
drivers/usb/core/usb.c: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
Non-volatile memory driver v1.2
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
hdc: ATAPI 40X DVD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 32X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
SCSI subsystem initialized
st: Version 20040318, fixed bufsize 32768, s/g segs 256
BIOS EDD facility v0.13 2004-Mar-09, 2 devices found
eth0: no IPv6 routers present ...

read more »

 
 
 

soundcard SoundBlaster PCI128 or SoundBlaster live1024 problem

Post by drstrange2.. » Fri, 20 Aug 2004 13:28:10


This message was cancelled from within Mozilla.
 
 
 

soundcard SoundBlaster PCI128 or SoundBlaster live1024 problem

Post by Noi » Fri, 20 Aug 2004 15:30:30




> [soundcard init pblm after reeboot]

> Sorry or the size.

> Boris

>> What messages are you getting from boot log and dmesg?
>> lspci ?  lsmod ?

> dmesg:

I need to be more specific in my responses.  What I meant was did "you"
see anything unusual in dmesg, etc.  

I could be wrong but it looks like you have 2 sound cards installed.  Do
you need to disable the onboard sound?   Does "sound card detection" play
the sound for you?  

 
 
 

soundcard SoundBlaster PCI128 or SoundBlaster live1024 problem

Post by boris gerlac » Sat, 21 Aug 2004 02:51:59



> I need to be more specific in my responses.  What I meant was did "you"
> see anything unusual in dmesg, etc.  

Nothing at all for me.

Quote:

> I could be wrong but it looks like you have 2 sound cards installed.  Do
> you need to disable the onboard sound?   Does "sound card detection" play
> the sound for you?  

History:

I used SuSE 7.0 and the soundcard worked fine.

I Installed SuSE 9.1 and the soundcard worked fine
but not after reeboot. I had to reinialize the card after every
reboot.

So I orderd a new soundcard SB 1024 live to solve the Problem
but also this soundcard has the same behaviour than the old one.

After switching off and on the computer I have to initialize
the soundcard new.
May be a HW problem?

Best regards
Boris

 
 
 

soundcard SoundBlaster PCI128 or SoundBlaster live1024 problem

Post by Noi » Sat, 21 Aug 2004 06:43:10




>> I need to be more specific in my responses.  What I meant was did "you"
>> see anything unusual in dmesg, etc.  

> Nothing at all for me.

>> I could be wrong but it looks like you have 2 sound cards installed.  Do
>> you need to disable the onboard sound?   Does "sound card detection" play
>> the sound for you?  

> History:

> I used SuSE 7.0 and the soundcard worked fine.

> I Installed SuSE 9.1 and the soundcard worked fine
> but not after reeboot. I had to reinialize the card after every
> reboot.

> So I orderd a new soundcard SB 1024 live to solve the Problem
> but also this soundcard has the same behaviour than the old one.

> After switching off and on the computer I have to initialize
> the soundcard new.
> May be a HW problem?

> Best regards
> Boris

Yes.  Sorry I'm not familiar with SuSE but in RH
Linux there is a utility called Kudzu that probes for hardware that
removes and configures the hardware it finds.   Also, there is an applet
called "Soundcard Detection" which probes for and tests the sound card.

If you have the time.  Maybe you could physically remove the sound card(s)
and disable the onboard sound card.  Reboot the system without the sound
cards to see if SuSE removes the sound card.  Then install one of the
cards and see if SuSE properly installs and configures the sound card.  

I had trouble with my Cmedia card after I installed FC2 with ALSA drivers
instead of OSS and the ALSA drivers for the FC1.  After  I tracked the
problem to a misspelled snd driver in modprobe.conf  I still had major
problems with the sound.  I fixed most of those by removing .asoundrc from
and changing the drivers in xmms, mplayer, etc to point to the ALSA
drivers instead of the drivers in use from FC1.  

I'm still working on a discrepancy where AC3 sound output from gmplayer
which doesn't play well but AC3 from mplayer works perfectly.

 
 
 

soundcard SoundBlaster PCI128 or SoundBlaster live1024 problem

Post by Boris Gerlac » Sun, 22 Aug 2004 18:46:49



> If you have the time.  Maybe you could physically remove the sound card(s)
> and disable the onboard sound card.  Reboot the system without the sound
> cards to see if SuSE removes the sound card.  Then install one of the
> cards and see if SuSE properly installs and configures the sound card.  

Hi Noi

At first. It seems to work now.:-)
As you proposed, I plugged out the card and did a reboot
of the system. But now I changed also the position of the card.
Physically instead of behind the 3com network card I placed
the card on a PCI slot which is physically on the other side
of the network card. I know PCI is a Bus, so it should have
no influence. But??  After this I installed new, as well as I did
in former tests but now it works. Also after reboot the card
plays sound immediatly.
May be the old slot has a problem? Nevertheless now it works
and I closed the PC and hopefully I never need to open it again.

Thx. and best regards

Boris

 
 
 

soundcard SoundBlaster PCI128 or SoundBlaster live1024 problem

Post by Noi » Fri, 27 Aug 2004 00:00:01




>> If you have the time.  Maybe you could physically remove the sound card(s)
>> and disable the onboard sound card.  Reboot the system without the sound
>> cards to see if SuSE removes the sound card.  Then install one of the
>> cards and see if SuSE properly installs and configures the sound card.  

> Hi Noi

> At first. It seems to work now.:-)
> As you proposed, I plugged out the card and did a reboot
> of the system. But now I changed also the position of the card.
> Physically instead of behind the 3com network card I placed
> the card on a PCI slot which is physically on the other side
> of the network card. I know PCI is a Bus, so it should have
> no influence. But??  After this I installed new, as well as I did
> in former tests but now it works. Also after reboot the card
> plays sound immediatly.
> May be the old slot has a problem? Nevertheless now it works
> and I closed the PC and hopefully I never need to open it again.

> Thx. and best regards

> Boris

Great news and there are some motherboards that do have problems using
with certain combinations pci cards in different slots.  I don't remember
which boards or cards though.  So it's great you switched pci slots.