Speedtouch ADSL - Orange LED always ON - HELP!

Speedtouch ADSL - Orange LED always ON - HELP!

Post by Fran » Mon, 04 Jul 2005 08:47:51



Hi,

I'm not being able to have any connection with
speedtouch 330 modem (red wine colour) and Fedora Core
3. After the power-up, I end up with one orange LED
(the right one - ADSL). I'm trying desperately to find
the reason, but I'm getting desperate!

I'm going to post next all the information I could get
from my system.... Pls help on getting the modem
working properly....

here it goes:
=>$ lsusb
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 002: ID 04fc:0003 Sunplus Technology
Co., Ltd CM1092 Optical Scroller Mouse
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 004: ID 06b9:4061 Alcatel Telecom Speed
Touch ISDN or ADSL Modem
Bus 001 Device 003: ID 0409:0058 NEC Corp. HighSpeed
Hub
Bus 001 Device 001: ID 0000:0000

=># ll /dev/ppp
crw-------  1 root root 108, 0 Jul  2 23:37 /dev/ppp

=>#./speedtouch-doctor.sh
You are using linux kernel version 2.6.9-1.667
Support for USB is OK
Preliminary USB device filesystem is OK
I found no USB controller

=># cat /proc/pci
PCI devices found:
  Bus  0, device   0, function  0:
    Class 0600: PCI device 8086:3340 (rev 3).
      Prefetchable 32 bit memory at 0xd0000000
[0xdfffffff].
  Bus  0, device   1, function  0:
    Class 0604: PCI device 8086:3341 (rev 3).
      Master Capable.  Latency=96.  Min Gnt=12.
  Bus  0, device  29, function  0:
    Class 0c03: PCI device 8086:24c2 (rev 1).
      IRQ 11.
      I/O at 0x1800 [0x181f].
  Bus  0, device  29, function  1:
    Class 0c03: PCI device 8086:24c4 (rev 1).
      IRQ 11.
      I/O at 0x1820 [0x183f].
  Bus  0, device  29, function  2:
    Class 0c03: PCI device 8086:24c7 (rev 1).
      IRQ 11.
      I/O at 0x1840 [0x185f].
  Bus  0, device  29, function  7:
    Class 0c03: PCI device 8086:24cd (rev 1).
      IRQ 11.
      Non-prefetchable 32 bit memory at 0xc0000000
[0xc00003ff].
  Bus  0, device  30, function  0:
    Class 0604: PCI device 8086:2448 (rev 129).
      Master Capable.  No bursts.  Min Gnt=4.
  Bus  0, device  31, function  0:
    Class 0601: PCI device 8086:24cc (rev 1).
  Bus  0, device  31, function  1:
    Class 0101: PCI device 8086:24ca (rev 1).
      IRQ 11.
      I/O at 0x1860 [0x186f].
      Non-prefetchable 32 bit memory at 0x20000000
[0x200003ff].
  Bus  0, device  31, function  3:
    Class 0c05: PCI device 8086:24c3 (rev 1).
      IRQ 11.
      I/O at 0x1880 [0x189f].
  Bus  0, device  31, function  5:
    Class 0401: PCI device 8086:24c5 (rev 1).
      IRQ 11.
      I/O at 0x1c00 [0x1cff].
      I/O at 0x18c0 [0x18ff].
      Non-prefetchable 32 bit memory at 0xc0000c00
[0xc0000dff].
      Non-prefetchable 32 bit memory at 0xc0000800
[0xc00008ff].
  Bus  0, device  31, function  6:
    Class 0703: PCI device 8086:24c6 (rev 1).
      IRQ 11.
      I/O at 0x2400 [0x24ff].
      I/O at 0x2000 [0x207f].
  Bus  1, device   0, function  0:
    Class 0300: PCI device 1002:4c66 (rev 2).
      IRQ 11.
      Master Capable.  Latency=66.  Min Gnt=8.
      Prefetchable 32 bit memory at 0xe0000000
[0xe7ffffff].
      I/O at 0x3000 [0x30ff].
      Non-prefetchable 32 bit memory at 0xc0100000
[0xc010ffff].
  Bus  2, device   0, function  0:
    Class 0607: PCI device 104c:ac46 (rev 1).
      IRQ 11.
      Master Capable.  Latency=168.  Min Gnt=192.Max
Lat=5.
      Non-prefetchable 32 bit memory at 0xb0000000
[0xb0000fff].
  Bus  2, device   0, function  2:
    Class 0c00: PCI device 104c:802a (rev 1).
      IRQ 11.
      Master Capable.  Latency=64.  Min Gnt=2.Max
Lat=4.
      Non-prefetchable 32 bit memory at 0xc0215000
[0xc02157ff].
      Non-prefetchable 32 bit memory at 0xc0210000
[0xc0213fff].
  Bus  2, device   1, function  0:
    Class 0200: PCI device 8086:101e (rev 3).
      IRQ 11.
      Master Capable.  Latency=64.  Min Gnt=255.
      Non-prefetchable 32 bit memory at 0xc0220000
[0xc023ffff].
      Non-prefetchable 32 bit memory at 0xc0200000
[0xc020ffff].
      I/O at 0x8000 [0x803f].
  Bus  2, device   2, function  0:
    Class 0280: PCI device 8086:1043 (rev 4).
      IRQ 11.
      Master Capable.  Latency=64.  Min Gnt=2.Max
Lat=34.
      Non-prefetchable 32 bit memory at 0xc0214000
[0xc0214fff].

=># ifconfig -a
eth0      Link encap:Ethernet  HWaddr
00:0D:60:B1:6A:5F
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0
frame:0
          TX packets:0 errors:0 dropped:0 overruns:0
carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
          Base address:0x8000 Memory:c0220000-c0240000

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:3885 errors:0 dropped:0
overruns:0 frame:0
          TX packets:3885 errors:0 dropped:0
overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:4987961 (4.7 MiB)  TX bytes:4987961
(4.7 MiB)

sit0      Link encap:IPv6-in-IPv4
          NOARP  MTU:1480  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0
frame:0
          TX packets:0 errors:0 dropped:0 overruns:0
carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

=> File /etc/rc.local

#!/bin/sh
#
# This script will be executed *after* all the other
init scripts.
# You can put your own initialization stuff in here if
you don't
# want to do the full Sys V style init stuff.

touch /var/lock/subsys/local

#ADSL Stuff
/sbin/modprobe ppp_generic
/sbin/modprobe ppp_synctty
/sbin/modprobe n_hdlc
/sbin/modprobe tun
/sbin/modprobe usb-uhci
/usr/local/sbin/modem_run -m -s -f
/usr/lib/bootboth.eni
/usr/local/sbin/pppoa3 -b -m 1 -c -vpi 0 -vci 35
/sbin/ifconfig tap0 up
/sbin/adsl-start

=>from dmesg (Kernel Startup log)
....
input: USB HID v1.00 Mouse [USB Wheel Mouse] on
usb-0000:00:1d.1-1
usb 1-4.4: new full speed USB device using address 4
ieee1394: Host added: ID:BUS[0-00:1023]
GUID[00061b0201311e7c]
NET: Registered protocol family 8
NET: Registered protocol family 20
usb 1-4.4: control timeout on ep0in
usbcore: registered new driver speedtch
usb 1-4.4: no stage 1 firmware found!<6>NET:
Registered protocol family 10
Disabled Privacy Extensions on device 02369a00(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet
device sit0
.....

=> RPMs installed
ppp-2.4.2-6.4.FC3.i386.rpm
rp-pppoe-3.5-22.i386.rpm

Sppedtouch is isntalled through:
speedtouch-1.3.1.tar.gz

=> /var/log/messages

(...)
Jul  2 22:38:45 panther kernel: input: USB HID v1.00
Mouse [USB Wheel Mouse] on usb-0000:00:1d.1-1
Jul  2 22:38:45 panther kernel: usb 1-4.4: new full
speed USB device using address 4
Jul  2 22:38:45 panther kernel: NET: Registered
protocol family 8
Jul  2 22:38:45 panther kernel: NET: Registered
protocol family 20
Jul  2 22:38:45 panther kernel: usb 1-4.4: control
timeout on ep0in
Jul  2 22:38:45 panther kernel: usbcore: registered
new driver speedtch
Jul  2 22:38:45 panther kernel: usb 1-4.4: no stage 1
firmware found!<6>NET: Registered protocol family 10
Jul  2 22:38:45 panther kernel: Disabled Privacy
Extensions on device 02369a00(lo)
(...)
Jul  2 22:38:56 panther haldaemon: haldaemon startup
succeeded
Jul  2 22:38:56 panther kernel: CSLIP: code copyright
1989 Regents of the University of California
Jul  2 22:38:56 panther kernel: PPP generic driver
version 2.4.2
Jul  2 22:38:56 panther kernel: HDLC line discipline:
version $Revision: 4.8 $, maxframe=4096
Jul  2 22:38:56 panther kernel: N_HDLC line discipline
registered.
Jul  2 22:38:56 panther kernel: Universal TUN/TAP
device driver 1.5 (C)1999-2002 Maxim Krasnyansky
Jul  2 22:38:56 panther modem_run[3409]: modem_run
version 1.3.1 started by root uid 0
Jul  2 22:38:57 panther fstab-sync[3479]: removed all
generated mount points
Jul  2 22:38:57 panther fstab-sync[3506]: added mount
point /media/idedisk for /dev/hde1
Jul  2 22:38:58 panther fstab-sync[3548]: added mount
point /media/cdrecorder for /dev/hdc
Jul  2 22:39:01 panther modem_run[3409]: Another
program/driver is already accessing the modem
(interface 1 cannot be claimed)...
Jul  2 22:39:01 panther pppoa3[3798]: pppoa3 version
1.3.1 started by root (uid 0)
Jul  2 22:39:01 panther pppoa3[3798]: Control thread
ready
Jul  2 22:39:01 panther pppoa3[3798]:
pusb_claim_interface 1 failed
Jul  2 22:39:02 panther pppd[3888]: pppd 2.4.2 started
by root, uid 0
Jul  2 22:39:02 panther pppd[3888]: Using interface
ppp0
Jul  2 22:39:02 panther pppd[3888]: Connect: ppp0 <-->
/dev/pts/1
Jul  2 22:39:02 panther pppoe[3889]:
ioctl(SIOCGIFHWADDR): Session 0: No such device
Jul  2 22:39:03 panther pppd[3888]: Modem hangup
Jul  2 22:39:03 panther pppd[3888]: Connection
terminated.
Jul  2 22:39:03 panther pppd[3888]: Exit.
Jul  2 22:39:03 panther adsl-connect: ADSL connection
lost; attempting re-connection.
Jul  2 22:39:08 panther pppd[3931]: pppd 2.4.2 started
by root, uid 0
Jul  2 22:39:08 panther pppoe[3932]:
ioctl(SIOCGIFHWADDR): Session 0: No such device
Jul  2 22:39:08 panther pppd[3931]: Couldn't get
channel number: Input/output error
Jul  2 22:39:08 panther pppd[3931]: Exit.
Jul  2 22:39:08 panther adsl-connect: ADSL connection
lost; attempting re-connection.
Jul  2 22:39:11 panther hal.hotplug[3810]:
timout(10000 ms) waiting for /class/net/tap0
Jul  2 22:39:13 panther pppd[3952]: pppd 2.4.2 started
by root, uid 0
Jul  2 22:39:13 panther pppoe[3953]:
ioctl(SIOCGIFHWADDR): Session 0: No such device
Jul  2 22:39:13 panther pppd[3952]: Couldn't get
channel number: Input/output error
Jul  2 22:39:13 panther pppd[3952]: Exit.
Jul  2 22:39:13 panther adsl-connect: ADSL connection
lost; attempting re-connection.
Jul  2 22:39:18 panther pppd[3967]: pppd 2.4.2 started
by root, uid 0
Jul  2 22:39:18 panther pppoe[3968]:
ioctl(SIOCGIFHWADDR): Session 0: No such device
Jul  2 22:39:18 panther pppd[3967]: Couldn't get
channel number: Input/output error
Jul  2 22:39:18 panther pppd[3967]: Exit.
Jul  2 22:39:18 panther adsl-connect: ADSL connection
lost; attempting re-connection.
Jul  2 22:39:23 panther pppd[3982]: pppd 2.4.2 started
by root, uid 0
Jul  2 22:39:23 panther pppoe[3983]:
ioctl(SIOCGIFHWADDR): Session 0: No such device
Jul  2 22:39:23 panther pppd[3982]: Couldn't get
channel number: Input/output error
Jul  2 22:39:23 panther pppd[3982]: Exit.
Jul  2 22:39:23 panther adsl-connect: ADSL connection
lost; attempting re-connection.
Jul  2 22:39:28 panther pppd[3997]: pppd 2.4.2 started
by root, uid 0
Jul  2 22:39:28 panther pppoe[3998]:
ioctl(SIOCGIFHWADDR): Session 0: No such device
Jul  2 22:39:28 panther pppd[3997]: Couldn't get
channel number: Input/output error
Jul  2 22:39:28 panther pppd[3997]: Exit.
Jul  2 22:39:28 panther adsl-connect: ADSL connection
lost; attempting re-connection.
Jul  2 22:39:33 panther gpm[3278]: *** info
[mice.c(1766)]:
Jul  2 22:39:33 panther gpm[3278]: imps2:
Auto-detected intellimouse PS/2
Jul  2 22:39:33 panther pppd[4213]: pppd 2.4.2 started
by root, uid 0
Jul  2 22:39:33 panther pppoe[4214]:
ioctl(SIOCGIFHWADDR): Session 0: No such device
Jul  2 22:39:33 panther pppd[4213]: Couldn't get
channel number: Input/output error
Jul  2 22:39:33 panther pppd[4213]: Exit.
Jul  2 22:39:33 panther adsl-connect: ADSL connection
lost; attempting re-connection.
Jul  2 22:39:38 panther pppd[6720]: pppd 2.4.2 started
by root, uid 0
Jul  2 22:39:38 panther pppoe[6721]:
ioctl(SIOCGIFHWADDR): Session 0: No such device
Jul  2 22:39:38 panther pppd[6720]: Couldn't get
channel number: Input/output error
Jul  2 22:39:38 panther pppd[6720]: Exit.
Jul  2 22:39:38 panther adsl-connect: ADSL connection
lost; attempting re-connection.
Jul  2 22:39:43 panther pppd[8410]: pppd 2.4.2 started
by root, uid 0
Jul  2 22:39:43 panther pppoe[8411]:
ioctl(SIOCGIFHWADDR): Session 0: No such device
Jul  2 22:39:43 panther pppd[8410]: Couldn't get
channel number: Input/output error
Jul  2 22:39:43 panther pppd[8410]: Exit.
Jul  2 22:39:43 panther adsl-connect: ADSL connection
lost; attempting re-connection.
Jul  2 22:39:50 panther pppd[11617]: pppd 2.4.2
started by root, uid 0
Jul  2 22:39:50 panther pppoe[11621]:
ioctl(SIOCGIFHWADDR): Session 0: No such device
Jul  2 22:39:50 panther pppd[11617]: Using interface
ppp0
Jul  2 22:39:51 panther pppd[11617]: Connect: ppp0
<--> /dev/pts/1
Jul  2 22:39:52 panther pppd[11617]: Modem hangup
Jul  2 22:39:52 panther pppd[11617]: Connection
terminated.
Jul  2 22:39:52 panther pppd[11617]: Exit.
Jul  2 22:39:52 panther adsl-connect: ADSL connection
lost; attempting re-connection.
Jul  2 22:39:58 panther pppd[14181]: pppd 2.4.2
started by root, uid 0
Jul  2 22:39:58 panther pppd[14181]: Using interface
ppp0
Jul  2 22:39:58 panther pppd[14181]: Connect: ppp0
<--> /dev/pts/1
Jul  2 22:39:58 panther pppoe[14219]:
ioctl(SIOCGIFHWADDR): Session 0: No such device
Jul  2 22:39:58 panther pppd[14181]: Modem hangup
Jul  2 22:39:58 panther pppd[14181]: Connection
terminated.
Jul  2 22:39:58 panther pppd[14181]: Exit.
Jul  2 22:39:58 panther adsl-connect: ADSL connection
lost; attempting re-connection.
Jul  2 22:40:04 panther pppd[16864]: pppd 2.4.2
started by root, uid 0
Jul  2 22:40:04 panther pppd[16864]: Using interface
ppp0
Jul  2 22:40:04 panther pppd[16864]: Connect: ppp0
<--> /dev/pts/1
Jul  2 22:40:04 panther pppoe[16897]:
ioctl(SIOCGIFHWADDR): Session 0: No such device
Jul  2 22:40:06 panther pppd[16864]: Modem hangup
Jul  2 22:40:06 panther pppd[16864]: Connection
terminated.
Jul  2 22:40:06 panther pppd[16864]: Exit.
Jul  2 22:40:06 panther adsl-connect: ADSL connection
lost; attempting re-connection.
Jul  2 22:40:17 panther hal.hotplug[17463]:
timout(10000 ms) waiting for /class/net/ppp0
Jul  2 22:40:17 panther hal.hotplug[17471]:
timout(10000 ms) waiting for /class/net/ppp0
Jul  2 22:40:17 panther kernel: ACPI: PCI interrupt
0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11

Thanks in advance!
frank

 
 
 

1. SpeedTouch Pro ADSL router and networking - Help!

I have just signed up for a wires-only adsl account with Eclipse
internet in the UK. For those of you not from the UK, wires-only has
only recently been introduced here and involves the telecoms company
(BT in this case) switching on ADSL at the exchange. The user is
required to purchase the modem a microfilter for each extension in
the house. I will have one static IP address allocated to me by Eclipse.

Today I received confirmation that the account has been set up and will
go live on Monday. I have ordered an Alcatel SpeedTouch Pro single-port
adsl router - DSLSource have just reduced the price to 138 pounds + VAT,
and given neither SEG nor Solwise have their alternatives in stock I
feel I have a bargain. Anyway, I currently have two PCs networked and an
NTL cable modem (connected to the Linux box) which will be sent back
asap. One machine runs Linux, the other Windows.

I use Samba on the Linux box so that the Windows machine can print to
the Linux printers and share files, and squid so that the Windows
machine can access web sites. I chose to use squid rather that NAT
because it was simple.

In my Linux PC I have two network cards. One card is connected to
the cable modem, the other to a small 4 port Netgear hub. When I get the
SpeedTouchPro I intend removing the second card on the Linux box since
the STP can can be plugged directly into my hub. What I would like to do
is to continue using the networking I have already setup for file
sharing and printing (though there will obviously be some reconfiguring
with there being a single nic in the Linux box).

The quick setup guide for the STP uses DHCP as a default which would be
great apart from the fact I can't see how I would be able to network the
two machines if the IP addresses keep changing. Looking through the
manual, I see sections for all sorts of protocols. Eclipse Internet tell
me to use RFC2364 PPPoATM VC Encapsulation Multimode AutoModulation. The
nearest I can find in the STP manual is either PPoA-to-PPTO relaying or
PPP & IP routing. Which should I use? I would imagine I would need to
allocate a static IP address to each machine (ideally what I already use
- 192.168.1.1 and 192.168.1.0) this would surely mean that the
networking would just carry on working. I want to go for always-on
connection to the Internet.

How do I accomplish what I want to do? I am eternally grateful to anyone
who can explain what appears to me to be something of a Black Art!!
I have been searching groups.google.com for most of the day and I
have just read through a good few thousand messages on this

BTW I am using Debian (Unstable) on my main machine and Windows 98 on
the second machine upstairs.

Many thanks indeed.

--
Phillip Deackes
Using Debian Linux

/"\  
\ /   ASCII RIBBON CAMPAIGN
 X    AGAINST HTML MAIL AND NEWS
/ \

2. Alt Key won′t work in Java under X

3. Would Like Help:-Alcatel SpeedTouch USB ADSL modem

4. quake3 sound troubles

5. HELP ! - Alcatel SpeedTouch USB modem for ADSL

6. Installing Unreal Tourny 2003

7. Speedtouch ADSL can't reconnect

8. NIS server under Solaris 2.2

9. SpeedTouch USB ADSL modem and Mandrake 8.1 connected but not working

10. ALCATEL USB SpeedTouch ADSL modem & Linux RH 7.0?

11. ADSL Speedtouch USB modem installation

12. speedtouch adsl modem

13. Alcatel Speedtouch ADSL Redhat 7.1