WinTV Go under linux - without sound

WinTV Go under linux - without sound

Post by Sebastian Eschweile » Sun, 21 Jan 2001 07:16:27



Hello Linux-Users,

I've been trying to get my WinTV Go Card working with Linux (SuSE 7).
Although I can see all tv-programms under KWinTv there is no sound output.
My KDE-soundsystem is working because there are several other
soundprogramms which play music correct. Also the mixer values are on
the right position. What can be wrong with my installation??
Thank you for you help

Sebastian

 
 
 

WinTV Go under linux - without sound

Post by zzor.. » Mon, 22 Jan 2001 10:29:41


I have had the same problem however, when I launch "gmix" it sets the
mixer correctly and then I can hear everything fine.  I haven't found a
way to make it do it when it starts.

Keith



Quote:> Hello Linux-Users,

> I've been trying to get my WinTV Go Card working with Linux (SuSE 7).
> Although I can see all tv-programms under KWinTv there is no sound
output.
> My KDE-soundsystem is working because there are several other
> soundprogramms which play music correct. Also the mixer values are on
> the right position. What can be wrong with my installation??
> Thank you for you help

> Sebastian

Sent via Deja.com
http://www.deja.com/

 
 
 

1. hauppauge wintv under 2.4.0 without sound?

Hi,

I have an older hauppauge wintv card (with stereo and radio part). Under
2.2.13 everything(!) worked fine.
Now, under 2.4.0, _almost_ evryathing works - but without sound!
I don't really understand this :-)
The card is iirc a "wintv", PCI, BT848 chipset (with radio/stereo) and
MSP3400 chip. Tuner is a philips. In the
modules.conf I have the following entries:
options bttv radio=1
post-install bttv /sbin/modprobe "-k" "tuner"
post-remove bttv /sbin/modprobe "-r" "tuner"
above tuner msp3400
options tuner   type=5
The tv card is attached to the linein-port of a SBLive. The mixer is ok,
and if I attached another sound source, I can hear it.
The following entries are from syslog:

Feb 11 21:57:09 moonglow modprobe: modprobe: Can't locate module
sound-slot-1
Feb 11 21:57:09 moonglow modprobe: modprobe: Can't locate module
sound-service-1
[also for 2 and 3. Is that a problem?]
Feb 11 21:57:09 moonglow kernel: Linux video capture interface: v1.00
Feb 11 21:57:09 moonglow kernel: i2c-core.o: i2c core module
Feb 11 21:57:09 moonglow kernel: i2c-algo-bit.o: i2c bit algorithm
module
Feb 11 21:57:09 moonglow kernel: bttv: driver version 0.7.50 loaded
Feb 11 21:57:09 moonglow kernel: bttv: using 2 buffers with 2080k (4160k
total)
for capture
Feb 11 21:57:09 moonglow kernel: bttv: Bt8xx card found (0).
Feb 11 21:57:09 moonglow kernel: bttv0: Bt848 (rev 18) at 00:0b.0, irq:
9, latency: 64, memory: 0xeedff000
Feb 11 21:57:09 moonglow kernel: bttv0: model: BT848A( *** UNKNOWN *** )
[autodetected]
Feb 11 21:57:09 moonglow kernel: i2c-core.o: adapter bt848 #0 registered
as adapter 0.

0x80... found
Feb 11 21:57:09 moonglow kernel: i2c-core.o: driver i2c msp3400 driver
registered.
Feb 11 21:57:09 moonglow kernel: msp34xx: init: chip=MSP3400C-C6
Feb 11 21:57:09 moonglow kernel: msp3400: daemon started
Feb 11 21:57:09 moonglow kernel: bttv0: i2c attach [MSP3400C-C6]  
Feb 11 21:57:09 moonglow kernel: i2c-core.o: client [MSP3400C-C6]
registered to
adapter [bt848 #0](pos. 0).

0xb0... not
found

0x8a... not
found
Feb 11 21:57:09 moonglow kernel: i2c-core.o: driver i2c TV tuner driver
registered.

Feb 11 21:57:09 moonglow kernel: bttv0: i2c attach [Philips PAL]
Feb 11 21:57:09 moonglow kernel: i2c-core.o: client [Philips PAL]
registered to
adapter [bt848 #0](pos. 1).    

I don't really find the problem. Maybe someone can give me a hint?

Thanks in advance,

Holger

--

2. cannot open crontab -e

3. NO SOUND in WinTV in Linux; YES SOUND in WinTV2000 microsoft !

4. NEED: Solaris 2.6 5/98 cd

5. WinTV-Go (model 190) under Linux

6. Call for Papers - SANE'2004

7. WinTV GO and PAL system

8. Booting with NT Boot Loader...

9. WinTV Go (bt878) cannot tune - please help

10. kernel freeze with bttv + WinTV Go

11. RH9 and Hauppage WInTV Go!

12. WinTV Go

13. WinTV Go model 607 Problem with BTTV